Raw Cutting Machinist

2 days ago

Kulim HiTech Park Kedah, Malaysia FERROTEC MANUFACTURING MALAYSIA SDN. BHD. Full time 30,000 - 60,000 per year

The Raw Cutting Machinist is responsible for operating and maintaining cutting machines to process raw material blocks/slabs according to production specifications. The role ensures accuracy, safety, and efficiency throughout the raw material preparation stage before further fabrication.

Machine Operation
  • Operate raw cutting machines (bridge saw, block cutter, gang saw or waterjet) to cut quartz blocks/slabs.
  • Set cutting parameters (speed, depth, alignment) based on material type and job order.
  • Ensure proper machine warm-up, calibration, and alignment before cutting.
Material Handling
  • Load and unload raw quartz blocks/slabs using forklift, crane, or lifting tools.
  • Inspect raw material for cracks, defects, or irregularities before cutting.
  • Label and tag cut pieces according to production schedule and traceability requirements.
Quality Control
  • Measure cut dimensions using measuring tools (tape, caliper, square ruler).
  • Ensure cut accuracy, squareness, and thickness meet engineering specifications.
  • Report defects, deviations, or abnormal material conditions to supervisor or QC.
Maintenance & Safety
  • Perform routine machine cleaning, lubrication, and basic preventive maintenance.
  • Monitor blade condition and assist in blade replacement or alignment adjustments.
  • Follow safety protocols when handling heavy materials and sharp cutting tools.
  • Maintain cleanliness of work area to avoid slip hazards and contamination.
Documentation & Reporting
  • Record daily production output and material usage.
  • Update machine logbook, maintenance checklist, and cutting reports.
  • Communicate with production planner on job priority and material readiness.
Job Requirements
  • SPM/STPM or equivalent; technical/vocational background is an advantage.

  • Minimum 1 year experience in machining, stone cutting, or manufacturing .

  • Good understanding of dimensions, tolerances, and measuring tools.

  • Basic mechanical knowledge for troubleshooting.
  • This is a fixed-term contract employment for 6 months. If the contract is successfully completed and both sides are satisfied, there have high chances to be converted as permanent employees.

  • CNC Machinist 5 Axis

    6 hours ago

    Kulim Hi-Tech Park, Kedah, Malaysia FERROTEC MANUFACTURING MALAYSIA SDN. BHD. Full time 90,000 - 120,000 per year

    The CNC Machinist – 5-Axis is responsible for setting up, operating, and maintaining 5-axis CNC machines to produce precision components as per engineering drawings and specifications. The role requires high attention to detail, understanding of complex machining processes, and adherence to quality and safety standards.Key Responsibilities:Set up and...

  • CNC Machinist

    2 days ago

    Kulim, Malaysia Jabil Circuit Sdn Bhd Full time

    RESPONSIBILITIES &DUTIES: 1. Review blueprint / technical drawing to understand how to set up the part 2. Run good quality parts and supervise until the end of the full cycle of machining 3. Understanding the basic operation of the milling /turning machine (G/M code. datum point setting, basic cutting tool knowledge, etc.) 4. Able to set the machine...

  • CNC Turning Machinist

    2 weeks ago

    Kulim, Kedah, Malaysia MIXXION ENGINEERING SDN. BHD. Full time 60,000 - 80,000 per year

    CNC Turning Machinist and ProgrammerKey Responsibilities:CNC Turning Programming:Prepare the program and setup sheet for the CNC TurningEnsure proper instructions for tools and workpiece setup and holding securely, including correct cutting tools use and preparation.Read and interpret blueprints, technical drawings, and specifications to determine machining...

  • CNC Programmer

    2 days ago

    Kulim, Malaysia Ferrotec Manufacturing Malaysia Sdn Bhd Full time

    As a CNC programmer, you will be responsible for reading and interpreting technical blueprints, inputting the design specifications, adjusting the machine cutting paths, and performing quality checks on the final product. You may also be required to perform routine machine maintenance and troubleshoot any issues that arise during the manufacturing...

  • Cook

    2 days ago

    Kulim, Kedah, Malaysia Ruema Awan Nano Kitchen Full time 20,000 - 30,000 per year

    Position SummaryResponsible for preparing, cooking, and ensuring all dishes are served according to taste, quality, and hygiene standards. Ensures smooth and organized kitchen operations while complying with company SOPs.Scope of WorkPrepare ingredients and cook daily menu items (Western, Malay Ala Carte, East Coast dishes, or Ala Carte).Maintain quality,...

  • Manufacturing Technician

    2 weeks ago

    Kulim, Malaysia Intel Full time

    **Job Details**: This role requires regular onsite presence to fulfill essential job responsibilities and ready to work in shift. Performs assigned product manufacturing and assembly tasks in the production process, ensuring that the finished products match the industry standards and customer specifications. Also supports developing, building and testing new...

  • Production Executive

    2 days ago

    Kuala Kedah, Kedah, Malaysia Kedah Agro Ausin Berhad Full time 2,000 - 3,500 per year

    Key Responsibilities1. Daily Production OperationsOversee end-to-end seafood processing activities including receiving, sorting, cutting, packing, labelling and dispatching.Monitor production workflow to ensure smooth, timely and efficient operations throughout all processing stages.Ensure optimal utilisation of machinery, tools and cold-room facilities to...

  • CNC Programmer

    2 days ago

    Kulim, Malaysia Compart Systems Technologies (Malaysia) Sdn. Bhd. Full time

    _**Key Responsibilities**:_ - Write and optimize CNC programs using CAM software (Computer-Aided Manufacturing) based on technical drawings, CAD models, and engineering specifications. - Select appropriate cutting tools, speeds, and feed rates for each machining operation. - Responsibility in designing the machining process flow involves creating a...

  • Manufacturing Technician

    7 hours ago

    Kulim, Malaysia Intel Full time

    **Job Details**: - Regular onsite role with readiness to work in shifts. - Perform product manufacturing and assembly tasks, ensuring outputs meet industry standards and customer specifications. - Support developing, building, and testing new products, prototypes, or processes; operate equipment in-factory or remotely. - Collect and evaluate operating data,...

  • Manufacturing Technician

    7 hours ago

    Kulim, Kedah, Malaysia Intel Corporation Full time 40,000 - 80,000 per year

    Job Details:Job Description: Regular onsite role with readiness to work in shifts.Perform product manufacturing and assembly tasks, ensuring outputs meet industry standards and customer specifications.Support developing, building, and testing new products, prototypes, or processes; operate equipment in-factory or remotely.Collect and evaluate operating...