CNC Machinist 5 Axis

1 day ago

Kulim HiTech Park Kedah, Malaysia FERROTEC MANUFACTURING MALAYSIA SDN. BHD. Full time 90,000 - 120,000 per year

The CNC Machinist – 5-Axis is responsible for setting up, operating, and maintaining 5-axis CNC machines to produce precision components as per engineering drawings and specifications. The role requires high attention to detail, understanding of complex machining processes, and adherence to quality and safety standards.

Key Responsibilities:

  • Set up and operate 5-axis CNC machines to manufacture complex components.
  • Interpret engineering drawings, blueprints, and technical specifications.
  • Load raw materials, measure and align workpieces, and select proper tooling.
  • Monitor machining processes and make necessary adjustments to maintain tolerances.
  • Perform basic programming and editing of G-code when required.
  • Inspect finished parts using precision measuring instruments (e.g., calipers, micrometers, CMM).
  • Maintain machine cleanliness and conduct basic preventive maintenance.
  • Record production data, machine settings, and part dimensions.
  • Collaborate with engineering and quality teams to resolve machining issues.
  • Follow company safety policies and standard operating procedures at all times.
Requirements:
  • Diploma/Certificate in Machining, Precision Engineering, or related technical field.
  • Minimum 2–3 years of hands-on experience in 5-axis CNC machining.
  • Strong understanding of G-code programming and CNC control systems (e.g., Fanuc, Siemens, Heidenhain).
  • Ability to read and interpret technical drawings and GD&T symbols.
  • Familiarity with high-precision component machining.
  • Basic troubleshooting of CNC machine issues.
  • Proficient in using measuring tools and inspection equipment.
  • Experience with CAM software is advantages.
  • Good problem-solving skills and attention to detail.
  • Willingness to work shifts and overtime if required.
  • This is a fixed-term contract employment for 6 months. If the contract is successfully completed and both sides are satisfied, there have high chances to be converted as permanent employees.

  • CNC Machinist

    3 days ago

    Kulim, Malaysia Jabil Circuit Sdn Bhd Full time

    RESPONSIBILITIES &DUTIES: 1. Review blueprint / technical drawing to understand how to set up the part 2. Run good quality parts and supervise until the end of the full cycle of machining 3. Understanding the basic operation of the milling /turning machine (G/M code. datum point setting, basic cutting tool knowledge, etc.) 4. Able to set the machine...

  • Turning Machinist

    3 days ago

    Kulim Hi-Tech Park, Kedah, Malaysia FERROTEC MANUFACTURING MALAYSIA SDN. BHD. Full time 30,000 - 60,000 per year

    The Turning Machinist is responsible for operating manual and/or CNC turning machines to produce metal components according to engineering drawings, specifications, and quality requirements. This role ensures precision machining, proper tool selection, and efficient production while maintaining safety and housekeeping standards.Machine OperationSet up and...

  • CNC Machinist

    1 week ago

    Kulim, Malaysia Ferrotec Manufacturing Malaysia Sdn Bhd Full time

    **A CNC Machinist is responsible for operating and programming CNC machines to produce precision metal, ceramic and quartz parts. This role involves setting up machinery, reading technical blueprints, and maintaining equipment.** **Key Responsibilities**: - Set up and operate CNC machines such as lathes, mills, or grinders. - Program CNC machines using...

  • CNC Programmer

    2 weeks ago

    Kulim, Malaysia Alpha Precision Turning & Engrg Sdn Bhd Full time

    **Responsibilities**: - JOB RESPONSIBILITIES: - Responsible for providing cycle time upon received enquiry from BD Dept - Responsible to prepare programme via CAM for selected products either RFQ’s or FA or Mass Production- Create and modify programs with company software such as Esprit, Master Cam & Gibbs Cam. All created / modified programmes need to...

  • CNC Turning Machinist

    2 weeks ago

    Kulim, Kedah, Malaysia MIXXION ENGINEERING SDN. BHD. Full time 60,000 - 80,000 per year

    CNC Turning Machinist and ProgrammerKey Responsibilities:CNC Turning Programming:Prepare the program and setup sheet for the CNC TurningEnsure proper instructions for tools and workpiece setup and holding securely, including correct cutting tools use and preparation.Read and interpret blueprints, technical drawings, and specifications to determine machining...

  • CNC Programmer

    3 days ago

    Kulim, Malaysia Ferrotec Manufacturing Malaysia Sdn Bhd Full time

    As a CNC programmer, you will be responsible for reading and interpreting technical blueprints, inputting the design specifications, adjusting the machine cutting paths, and performing quality checks on the final product. You may also be required to perform routine machine maintenance and troubleshoot any issues that arise during the manufacturing...

  • CNC Programmer

    2 weeks ago

    Kulim, Malaysia Pivotal System (Malaysia) Sdn Bhd Full time

    Confer & participate in the NPI & RFQ process alongside operations & engineering. - Assure quality & production requirements are met, according to the customer specifications, drawing/blueprint. - Work independently, self-motivation with this little supervision. - Ability to communicate with co-workers, supervisors, production personnel and QC personnel. -...

  • Machining Inspector

    1 week ago

    Kulim, Malaysia Ferrotec Manufacturing Malaysia Sdn Bhd Full time

    **This is a fixed-term contract employment for 6 months. If the contract is successfully completed and both sides are satisfied, there have high chances to be converted as permanent employees.** **Key Responsibilities**: - Perform in-process and final inspections of CNC machined parts using precision measuring instruments (micrometers, calipers, height...

  • Lead Engineer, Manufacturing Process

    1 day ago

    Kulim Hi-Tech Park, Kedah, Malaysia Celestica Full time 90,000 - 120,000 per year

    Job Responsibilities :• Leads the entire SMT and Frontend Equipment's, leads new SMT equipment and line setup for the plant. • Constantly seek new technology and improvement for SMT related. • Assess and design the best SMT line configuration. • Lead Imaging Engineering. Inclusive of SPI, AXI, AOI & Xray counter. • Manage day to day operations...

  • CNC Machinist

    1 week ago

    Kulim, Malaysia Ferrotec Manufacturing Malaysia Sdn Bhd Full time

    **This is a fixed-term contract employment for 6 months. If the contract is successfully completed and both sides are satisfied, there have high chances to be converted as permanent employees.** **Key Responsibilities**: - Set up and operate CNC machines such as lathes, mills, or grinders. - Program CNC machines using G-code or CAM software based on...