Equipment Maintenance Technician

2 days ago

Sungai Petani, Kedah, Malaysia Jabil Circuit Sdn Bhd Full time $30,000 - $60,000 per year

JOB SUMMARY

Conducts component level diagnostics and repair of all workable products, Conducts component level diagnostics and repair for new product introduction NPI process, Tests complete functionality of device after repair has been performed and verifies all information to populate the data on the troubleshoot tech notes for the debug team.

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Receives specific work instruction from the repair/prescreen team leads and repair Manager. Operates directly with the Engineer group, with some latitude for un-reviewed actions or decisions, using education and experience as guides.

· Conducts component level diagnostics to isolate failing circuit, and identify root cause of failures.

· Conducts component level repair and cleaning of circuit repaired, as well create reference guide lines for all repair experiences performed.

· Uses practical, efficient methods for accomplishing assignments and avoid unproductive activities.

· Help other technicians in understanding the failure messages and mentor them as needed.

· Stages unit in Engineering Hold as required for appropriate Engineer evaluation of the product.

· Performs general cleaning of work area to ensure safety and discards all scrap material.

· Perform Material Review Board process for questionable WIP to disposition.

· Performs other related duties as assigned.

JOB QUALIFICATIONS

KNOWLEDGE REQUIREMENTS

·   Basic understanding of electrical circuits and relevant work experience

· Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public.

· Ability to define problems, collect data, establish facts, and draw valid conclusions.

· Ability to operate a personal computer including using a Windows based operating system and related software.

· Advanced PC skills, including training and knowledge of Jabil's software packages.

· Ability to write simple correspondence. Read and understand visual aid.

· Ability to apply common sense understanding to carry out simple one- or two-step instructions.

· Ability to deal with standardized situations with only occasional or no variables.

· Ability to read and comprehend simple instructions, short correspondence, and memos.

· Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.

· Ability to compute rate, ratio, and percent and to draw and interpret graphs.

  • Equipment Technician

    2 weeks ago

    Sungai Petani, Kedah, Malaysia Genitronic (Malaysia) Sdn. Bhd. Full time 30,000 - 60,000 per year

    To assist or cover PRODUCTION area in maintenance whenever is possible.To fulfill and support in line for machine conversion and tuningTo ensure that facilities support are able to cope up with the machine basic requirementsCan carry out and follow task given by Superior/Engineer to avoid line downTo carry out and support team in machine preventive...

  • electrical technician

    14 hours ago

    Sungai Petani, Kedah, Malaysia H & Y MAINTENANCE SDN BHD Full time 12,000 - 24,000 per year

    Electrical Technician / WiremanTUGAS DAN TANGGUNGJAWAB:Melaksanakan penyelenggaraan, servis, dan pembaikan bagi peralatan restoran.Melaksanakan pemasangan, dan pelarasan peralatan.Mengenal pasti dan membaiki kerosakan peralatan dengan pantas bagi memastikan kelancaran operasi.Bekerjasama dengan penyelia penyelenggaraan untuk mencapai matlamat dan tugas...

  • air cond technician

    14 hours ago

    Sungai Petani, Kedah, Malaysia H & Y MAINTENANCE SDN BHD Full time 2,400 per year

    Air Conditioning TechnicianTUGAS DAN TANGGUNGJAWAB:Melaksanakan penyelenggaraan, servis, dan pembaikan unit penyaman udara untuk restoran.Melaksanakan pembongkaran, pemasangan, dan pelarasan sistem penyaman udara.Mengatasi kerosakan penyaman udara dengan cekap dan memastikan operasi restoran tidak terganggu.Bekerjasama dengan penyelia penyelenggaraan untuk...

  • maintenance technician

    15 hours ago

    Sungai Petani, Kedah, Malaysia CHJ Property Sdn Bhd Full time 25,000 - 40,000 per year

    Key ResponsibilitiesMaintenance of building electrical and mechanical system; HVAC & chiller system: FCU, lightings, wiring, escalator, lift, kitchen system, firefighting system, CMMS, BMS.Carry out corrective, preventive and predictive maintenance.Electrical safety awareness/ prevention.Monitor and attend to contractors and sub contactors for maintenance...

  • Senior Maintenance

    2 days ago

    Sungai Petani, Kedah, Malaysia Thunder Print Sdn Bhd Full time 800,000 - 1,000,000 per year

    Lead and manage the maintenance team, including machinery, equipment or facilities.Oversee preventive maintenance activities and review procedures to ensure efficiency and compliance.Ensure all facilities and machinery operate at maximum performance.Plan and execute timely maintenance to minimize downtime and enhance equipment lifespan.Drive continuous...

  • Maintenance Engineer

    13 hours ago

    Sungai Petani, Kedah, Malaysia TONGDA SMART TECH (MALAYSIA) SDN. BHD. Full time 60,000 - 80,000 per year

    Machine Maintenance & RepairPerform troubleshooting and repair of plastic injection molding machines (hydraulic, mechanical, and electric types).Carry out maintenance on related equipment such as dryers, chillers, mold temperature controllers, air compressors, and conveyors.Diagnose mechanical, electrical, hydraulic, and pneumatic faults and implement...

  • Maintenance Supervisor

    14 hours ago

    Sungai Petani, Kedah, Malaysia TONGDA SMART TECH (MALAYSIA) SDN. BHD. Full time

    Develop and optimize equipment management systems and processes, establish asset ledgers and inventory control mechanisms to improve equipment utilization, promote automation implementation, and drive energy saving and efficiency-enhancing initiatives.• Coordinate equipment resources based on production plans, supervise and verify the equipment status ...

  • Automation Engineer

    2 days ago

    Sungai Petani, Kedah, Malaysia TONGDA SMART TECH (MALAYSIA) SDN. BHD. Full time 80,000 - 120,000 per year

    Design, program, and integrate automation systems including robotics, conveyors, and vision systems for injection molding production lines.Develop and optimize end-of-arm tooling (EOAT) for part handling, assembly, and packaging applications.Collaborate with molding engineers, process technicians, and maintenance teams to identify automation opportunities...

  • Technician (Mechanical/Electrical)

    14 hours ago

    Sungai Petani, Kedah, Malaysia Thong Guan Industries Bhd Full time 40,000 - 60,000 per year

    Job descriptionAssisting the mechanical engineer maintenance tasks.Installing and performing diagnostic tests on mechanical systems.Developing and implementing mechanical maintenance plans to prevent costly equipment breakdowns.Troubleshooting mechanical malfunctions and breakdowns, as well as performing repairs.Documenting processes and maintaining...

  • ME Technician

    2 weeks ago

    Sungai Petani, Kedah, Malaysia Jabil Circuit Sdn Bhd Full time 40,000 - 80,000 per year

    Develop production process parameters, develop consumables life, and confirm equipment DFMEvaluate fixtures that meet the functions, including developing fixture accuracy, life, assembly standards, and developing test plansEvaluate hot melt and USW equipment, and be able to debug hot melt machines and USWEvaluate dispensing equipment and be able to operate...