Current jobs related to Mold Setter cum Injection Molding Operator - Simpang Empat, Perak - MeHow Medical (M) Sdn Bhd

  • Injection Molding Technician

    2 days ago

    Simpang Empat, Perak, Malaysia MeHow Medical (M) Sdn Bhd Full time 40,000 - 80,000 per year

    Responsible to improve quality, cycle time and efficiency thru process parameter.Responsible in process parameter troubleshooting and provide support on maintenance task.Responsible to key in machine parameter settings after mold setup accordingly to mold card.Responsible to guide and training mold setter.Responsible to verify and follow up the completion of...

  • Mold Setter

    2 days ago

    Simpang Empat, Perak, Malaysia MeHow Medical (M) Sdn Bhd Full time 18,000 - 30,000 per year

    Responsible to install and remove injection molds according to production schedules and instructions.Responsible to perform mold changes and setup activities safely and efficiently.Responsible to ensure proper alignment and clamping of molds.Responsible to conduct start-up checks, including water lines, hydraulic connections, and hot runner controller...

  • IPQC (Molding)

    6 hours ago

    Simpang Empat, Perak, Malaysia MeHow Medical (M) Sdn Bhd Full time 18,000 - 30,000 per year

    Experience in Molding Injection Industry.Perform periodical inspection and verification process based on established inspection standard and samplingplan;Carry out first/last article inspections and keep the buy-off samples for future references;Stamp 'QC' on carton label to indicate part acceptance status;To perform verification of Molding Parameter Setting...

  • Injection Engineer

    2 weeks ago

    Simpang Empat, Perak, Malaysia MeHow Medical (M) Sdn Bhd Full time 60,000 - 120,000 per year

    Responsible to head up test mold progress, perform test mold failure analysis and take lead to improve or overcome new tooling issue before mass production.Responsible to establish and maintain technical documentation of new and existing products.Responsible to analyze, follow up, troubleshooting new trial run or mass production product issue which cause by...

  • NPI Assistant/Engineer

    2 days ago

    Simpang Empat, Perak, Malaysia MeHow Medical (M) Sdn Bhd Full time 60,000 - 120,000 per year

    Role DescriptionLead and manage the end-to-end NPI process for plastic injection molded components and assemblies.Plan and execute mold trials (T0, T1, etc.) and validation runs (IQ, OQ, PQ) to qualify tools and processes.Develop and optimize injection molding parameters and process documentation (WI, SOP, etc.).Work with tooling engineers, process...

  • Tooling Planner 模具规划员

    2 days ago

    Simpang Empat, Perak, Malaysia MeHow Medical (M) Sdn Bhd Full time 30,000 - 60,000 per year

    Job Responsibilities:Compile capacity load of tooling department (equipment, workers) according to mould orders, conduct advance assessment for outsource requirements 根据模具订单量,结合模具事业部的产能负荷(设备、人员),提前评估外发需求;Arrange for production schedule and release plan according to mould engineering time node...

  • Tooling Officer 模具文员

    2 days ago

    Simpang Empat, Perak, Malaysia MeHow Medical (M) Sdn Bhd Full time 24,000 - 72,000 per year

    Job Responsibilities:Follow up and liaise with internal dept/section to clarify and reconcile any data discrepancies, etc. 跟进并与内部部门联系,以澄清和调和任何数据差异等等Raise & follow up purchase requisition with related department. 向相关部门提出并跟进请购申请Ensure all documents of tooling documents are well...

  • Office cum Store Assistant

    2 days ago

    Kampung Simpang Pulai, Perak, Malaysia GREENRIDGE RESOURCES SDN. BHD. Full time 12,000 - 24,000 per year

    Job Description:Receive, inspect, and record goods received from suppliers.Arrange items according to their categories and designated locations in the store/warehouse.Ensure that stock is stored safely and kept in good condition.Assist in preparing outgoing orders (delivery orders/shipments).Check and update stock records from time to time.Assist in periodic...

  • Plastic and Liquid Injection Technician

    2 days ago

    Simpang Ampat, Malaysia SAMWA PRECISION SDN. BHD. Full time

    **SUMMARY** The Injection Mold Technician is responsible for all aspects of the mold processes to include operation, repair, and maintenance of injection mold equipment. - Responsible for documenting mold change and machine adjustments including troubleshooting and equipment maintenance. - Manage raw mold material to ensure traceability, shelf life, and...

  • Moulding Operator

    2 weeks ago

    Simpang Ampat, Malaysia Engineered Medical Systems Malaysia Sdn Bhd Full time

    **Responsibilities**: - Essential Duties for Moulding Operator: - i. Set molds and injection molding machines per established procedure. - ii. Complete the molding work order - material used, scrap, runner etc. - iii. Preparation for material used for molding - storage tank, dryer units. - iv. Maintain housekeeping of molding machines, equipment and work...

  • Tooling Manager

    2 weeks ago

    Simpang Ampat, Malaysia Fair Work (M) Sdn. Bhd. Full time

    Be fully responsible for the daily management of the Tooling department, including organizational construction, manpower planning and training plan. - Responsible for the continuous improvement of mold processing technology, mold production quality management, production efficiency management, production arrangement management, mold cost management, mold...

  • Tooling Manager

    2 weeks ago

    Simpang Ampat, Malaysia Lifework HR Services Sdn Bhd Full time

    Main Responsibilities - Be fully responsible for the daily management of the Tooling department, including organizational construction, manpower planning and training plan. - Responsible for the continuous improvement of mold processing technology, mold production quality management, production efficiency management, production arrangement management, mold...

  • Store Executive

    2 weeks ago

    Simpang Ampat, Malaysia RAPID GROWTH TECHNOLOGY SDN BHD Full time

    Raw materials warehouse specialists organise and monitor the reception and storage of raw materials in the warehouse according to the required conditions. They monitor the stock levels. Rapid Growth Technology Sdn. Bhd. (RGT) provides manufacturing solutions for plastic products. The Company offers injection molding, assembly, liquid-filling, and testing...

  • M tooling Mgr

    6 days ago

    Simpang Ampat, Malaysia Agensi Pekerjaan Alpha Alliance Sdn Bhd Full time

    JOB DESCRIPTION: - Be fully responsible for the daily management of the Tooling department, including organizational construction, manpower planning and training plan. - Responsible for the continuous improvement of mold processing technology, mold production quality management, production efficiency management, production arrangement management, mold cost...

  • Tooling Manager

    1 week ago

    Simpang Ampat, Malaysia MeHow Medical (M) Sdn Bhd Full time

    Be fully responsible for the daily management of the Tooling department, including organizational construction, manpower planning and training plan. - Responsible for the continuous improvement of mold processing technology, mold production quality management, production efficiency management, production arrangement management, mold cost management, mold...

  • Technician

    4 days ago

    Simpang Ampat, Malaysia RAPID GROWTH TECHNOLOGY SDN BHD Full time

    Process engineering technicians work closely with engineers to evaluate the existing processes and configure manufacturing systems to reduce cost, improve sustainability and develop best practices within the production process. Rapid Growth Technology Sdn. Bhd. (RGT) provides manufacturing solutions for plastic products. The Company offers injection molding,...

  • Electronic Technician

    2 days ago

    Simpang Ampat, Malaysia RAPID GROWTH TECHNOLOGY SDN BHD Full time

    Industrial electricians install and maintain electricity cables and other electrical infrastructure in large industrial and commercial buildings. They perform inspections and repair defective parts of electrical systems to ensure efficiency. Rapid Growth Technology Sdn. Bhd. (RGT) provides manufacturing solutions for plastic products. The Company offers...

  • Sales & Marketing Executive

    1 week ago

    Simpang Ampat, Malaysia Miho Technology Sdn Bhd Full time

    Responsible for developing the sales plan and executing sales strategies to meet and exceed company goals. - Develop, establish, and maintain profitable relationships with existing and potential customers. - Identify new market opportunities and trends. - Build and maintain strong client relationships by regularly following up on customer needs to enhance...

Mold Setter cum Injection Molding Operator

2 weeks ago

Simpang Empat, Perak, Malaysia MeHow Medical (M) Sdn Bhd Full time 18,000 - 25,000 per year
  • Responsible to install and remove injection molds according to production schedules and instructions.
  • Responsible to perform mold changes and setup activities safely and efficiently.
  • Responsible to ensure proper alignment and clamping of molds.
  • Responsible to conduct start-up checks, including water lines, hydraulic connections, and hot runner controller hookups.
  • Responsible to verify and follow up the completion of plastic injection mold setup. (Up & Down Mold)
  • Responsible to document mold setups and posting working hours during mold change.
  • Performed daily 7s activity / safe working environment and maintain high standard.
  • Report problems or concerns with Molds to superior.
  • To perform ad-hoc tasks assigned by superior.

Qualification & Experience:

  • SPM or Certificate
  • Fresh Graduate or Min 1 year experience with Molding or related field.

Job Types: Full-time, Permanent

Pay: RM1,700.00 per month

Benefits:

  • Free parking
  • Meal allowance
  • Professional development

Ability to commute/relocate:

  • Simpang Ampat: Reliably commute or planning to relocate before starting work (Preferred)

Application Question(s):

  • What's your expected monthly basic salary?
  • Are you able to work in shift?

Work Location: In person