Machinist

2 days ago

Shah Alam, Selangor, Malaysia ICHOR Systems Malaysia Sdn Bhd Full time 40,000 - 80,000 per year

The CNC Machinist is responsible for setting up and operating CNC mills and/or lathes to produce high-precision components. This role requires machining knowledge, strong problem-solving skills, and the ability to interpret drawings and control tight tolerances. The machinist ensures all parts meet quality standards, efficiency, and safety standards.

Key Responsibilities

  • Set up CNC mills, lathes, or multi-axis machines with minimal supervision according to Work Instructions and Tooling List.
  • Install, setup and adjust tooling offset, setup fixtures, work holding, and machine offsets.
  • Meet daily production targets with consistent part quality.
  • Load programs and prove out new FAI jobs safely.
  • Troubleshoot machining issues where applicable and communicate with supervisor, CADCAM programmers, and quality inspectors to resolve issues.
  • Follow instructions from supervisors and support team workflow.
  • Read and interpret technical drawings and engineering documentation.
  • Inspect in-process and finished parts using micrometers, calipers, height gauges, and other precision tools.
  • Support training of operator/fitter as needed.
  • Perform machine routine preventive maintenance
  • Keep work area clean, organized, and compliant with shop standards.

Job Requirements:

  • Diploma, Certificate or equivalent experience
  • 3–7 years of CNC machining experience (mills, lathes, or multi-axis).
  • Experience in high-precision or high-mix/low-volume environments strongly preferred.
  • Strong CNC setup and operating ability.
  • Ability to read and understand technical drawing
  • Experience with Haas, Fanuc, Heidenhain, or similar controls.
  • Proficient with precision measuring instruments.
  • Strong attention to detail and quality mindset.
  • Good communication and problem-solving skills.
  • Good hand–eye coordination and manual dexterity.

  • Machinist

    2 days ago

    Shah Alam, Selangor, Malaysia Ichor Full time 60,000 - 96,000 per year

    ResponsibilitiesThe CNC Machinist is responsible for setting up and operating CNC mills and/or lathes to produce high-precision components. This role requires machining knowledge, strong problem-solving skills, and the ability to interpret drawings and control tight tolerances. The machinist ensures all parts meet quality standards, efficiency, and safety...

  • CNC Machinist

    10 hours ago

    Shah Alam, Selangor, Malaysia HPMT Industries Sdn Bhd Full time 30,000 - 60,000 per year

    We are looking for a motivated CNC Operator / Machinist to join our production team. The ideal candidate will be responsible for operating CNC machines, ensuring precision and quality in every task. Candidates with grinding knowledge or machining experience are highly preferred, but fresh graduates are also welcome as training will be...

  • cnc machinist

    2 days ago

    Shah Alam, Selangor, Malaysia Agensi pekerjaan ns shue sdn bhd Full time 24,000 - 36,000 per year

    JOB VACANCYPOSITION- CNC MACHINIST (JUNIOR)LOCATION - SECTION 26, SHAH ALAMSALARY - RM Job DescriptionCNC machining (NC lathe, machining center)Fabrication of PVC gauge & cad cam gaugeFabrication of brazing jig, cutting jig, punch hole jig, welding jig etcGeneral machining (cutting, lathe, milling, grinding, drilling etc)xAssist senior supervisor in her...

  • cnc machinist, section 26

    2 days ago

    Shah Alam, Selangor, Malaysia AGENSI PEKERJAAN SHUE SDN BHD Full time 2,000 - 3,500 per year

    JOB VACANCYPOSITION- CNC MACHINIST (JUNIOR)LOCATION - SECTION 26, SHAH ALAMSALARY - RM Job Description1. CNC machining (NC lathe, machining center)2. Fabrication of PVC gauge & cad cam gauge3. Fabrication of brazing jig, cutting jig, punch hole jig, welding jig etc4. General machining (cutting, lathe, milling, grinding, drilling etc)x5. Assist senior...

  • Precision Machinist

    2 days ago

    Shah Alam, Selangor, Malaysia The Sandpipers (M) Sdn Bhd Full time 40,000 - 80,000 per year

    Job HighlightsHands-on role in Semiconductor Precision EngineeringOperate CNC Milling, WEDM, and Surface Grinding MachinesStable career growth in a high-precision manufacturing environmentJob DescriptionWe are growing precision engineering company specializing in semiconductor tools, jigs and fixtures fabrication.We are seeking experienced and skillful...

  • Machinist (Wire EDM, Grinding, CNC Milling, CNC Latte)

    10 hours ago

    Shah Alam, Selangor, Malaysia Amerix Metal Machining Technology Sdn Bhd Full time 28,000 - 70,000 per year

    Job Title: Machinist (Wire EDM/ Surface Grinding/ CNC Milling/ CNC Lathe) Location: [Shah Alam Section 22] Industry: Manufacturing / Precision EngineeringJob OverviewWe are seeking a skilled and dedicated Machinist to join our precision engineering team. The ideal candidate will have hands-on experience in Wire EDM, Surface Grinding, CNC Milling, and CNC...

  • Manufacturing Engineer

    2 days ago

    Shah Alam, Selangor, Malaysia ICHOR Systems Malaysia Sdn Bhd Full time 50,000 - 80,000 per year

    The Manufacturing Engineer will be responsible for designing, developing, and optimizing work-holding fixtures used in CNC machining operations. This role ensures high precision, efficiency, and repeatability in manufacturing processes. The designer will work closely with machinists, production engineers, and the CADCAM programming team to develop reliable...

  • Aircraft Engine Machinist

    2 weeks ago

    Shah Alam, Selangor, Malaysia GE Aerospace Full time 60,000 - 120,000 per year

    Job Description SummaryResponsible to operate VGM, HSG, & VTL to perform grinding of engine modules/parts in accordance with Company's documentation and manufacturer's manualsJob DescriptionAbout GE Aerospace:Are you ready to see your future take flight? At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute...

  • Aircraft Engine Machinist

    2 days ago

    Shah Alam, Selangor, Malaysia GE Aerospace Full time 80,000 - 120,000 per year

    Job Description SummaryResponsible to operate VGM, HSG, & VTL to perform grinding of engine modules/parts in accordance with Company's documentation and manufacturer's manualsJob DescriptionAbout GE Aerospace:Are you ready to see your future take flight? At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute...

  • Manufacturing Engineer

    2 days ago

    Shah Alam, Selangor, Malaysia Ichor Full time 20,000 - 40,000 per year

    ResponsibilitiesThe Manufacturing Engineer will be responsible for designing, developing, and optimizing work-holding fixtures used in CNC machining operations. This role ensures high precision, efficiency, and repeatability in manufacturing processes. The designer will work closely with machinists, production engineers, and the CADCAM programming team to...