Operator Machine CNC

3 days ago

Seremban, Negeri Sembilan, Malaysia GME Carbon Sdn Bhd Full time 2,080,000 - 4,064,000 per year

Job Responsibilities:

  • Responsible to follow basic blueprints, diagrams, engineering drawing, specifications. bill of materials and other written instructions/procedures to accurately assemble equipment and products.
  • Prepare & operate conventional and CNC machine to perform tasks given.
  • Basic responsibility shall be carried out and perform machine operation for area allocated.
  • Carry out job task as per respective Quality System procedures.
  • Responsible to record all production reports for parts that being product by individual.
  • Segregate rejected product from good quality goods.
  • Conduct inspection to maintain the quality status of the product produced.
  • Ensure production floor, bench and machine are clean and tidy.
  • Responsible to inspect all the parts/products and ensure compliance to all the specifications.
  • Keep superior alert on the quality problem occur during machine operation.
  • Responsible to monitor machine status and condition, report to superior immediately when alarm occur.
  • Maintain safe & clean working environment by complying with procedures, rules and regulations.
  • To undertake other duties assigned or directed by superior from time to time.

Job Requirements:

  • Possess at least SPM or equivalent.
  • At least 1 year working experience in the related field.
  • Having simple knowledge of Mathematics
  • Proficiency with hand tools
  • Willing to perform repetitive and tasks for extended periods.
  • Can start immediately.
  • Work at Sendayan

Job Types: Full-time, Permanent

Pay: From RM1,700.00 per month

Benefits:

  • Meal allowance
  • Opportunities for promotion
  • Professional development

Work Location: In person

  • CNC Op

    20 hours ago

    Seremban, Negeri Sembilan, Malaysia MY NAFCO PRECISION SDN. BHD. Full time 40,000 - 60,000 per year

    Machine Setup and Operation:Set up and operate CNC machines, such as CNC lathes, mills, grinders, and routers, based on production requirements.Load materials, tools, and machine components for production runs.Adjust machine settings to optimize production quality and efficiency.Program Input and Adjustments:Input CNC programs or load pre-existing programs...

  • Mechanical Engineer

    21 hours ago

    Seremban, Negeri Sembilan, Malaysia MY NAFCO PRECISION SDN. BHD. Full time 60,000 - 120,000 per year

    What you'll be doing:CNC programming and program simulation (ESprit, UG, Mastercam)Operation of CNC machines with Fanuc system (CNC Milling 3 &3+2 axis OR CNC mill-turning machine) and related machineryCNC tool and configuration, Maximize the use of the tools (e.g., Sharpening tool)Maintenance and adjustment of lathesManagement and maintenance of the...

  • Production Supervisor

    3 days ago

    Seremban, Negeri Sembilan, Malaysia MY NAFCO PRECISION SDN. BHD. Full time 60,000 - 120,000 per year

    Job PurposeTo lead and manage the CNC machining production operations for aerospace fasteners, ensuring production targets, quality standards, and delivery schedules are consistently met. The Production Head will oversee daily operations, coordinate with planners and engineers, and drive continuous improvement in efficiency, safety, and product quality.Key...

  • operator

    3 days ago

    Seremban, Negeri Sembilan, Malaysia Koito Malaysia SDN BHD Full time 23,000 - 27,600 per year

    OPERATE PRODUCTION MACHINE OR EQUIPMENT ACCORDING TO STANDARD OPERATING PROCEDURES (SOP)ENSURE DAILY PRODUCTION OUTPUT MEETS THE REQUIRED TARGET (QUANTITY & QUALITY)REPORT ANY ISSUES RELATED TO MACHINES, EQUIPMENT, MATERIALS, OR PRODUCT QUALITY TO THE SUPERIORMAINTAIN CLEANLINESS AND SAFETY OF THE WORK AREA IN LINE WITH 6s AND COMPANY SAFETY STANDARDSABILITY...

  • Production Operator

    21 hours ago

    Seremban, Negeri Sembilan, Malaysia SUGIHARA GRAND INDUSTRIES SDN BHD Full time

    Machine operator based in Sendayan, Negeri Sembilan4 VacanciesJob SummaryTo run production as per daily requirementKey Responsibilities· To attend individual line morning briefing· Prepare and submit production output report· Prepare production progress control chart· Check on machine / jig before during and after production· Prepare 1st / last check...

  • production operator

    21 hours ago

    Seremban, Negeri Sembilan, Malaysia KIAN JOO CANPACK SDN BHD (SEREMBAN) Full time

    1.4 ResponsibilityTanggungjawab1.4 (a) Daily operation of machine at specific area and cartooningPengoperasian mesin setiap hari di kawasan tertentu dan kartun1.4 (b) Changeover of line or machine where applicablePenukaran talian atau mesin di mana berkenaan1.4 (c) To check and remove rejects along the production and other sub-assembly duties as...

  • Assembly Operator

    20 hours ago

    Seremban, Negeri Sembilan, Malaysia Sandvik Full time 40,000 - 80,000 per year

    Assembly Operator (Job ID: R0074594) – Sandvik Equipment Sdn BhdAre you an experienced electrical or mechanic professional who is passionate to learn and develop within the role in a high-tech company with origin from Sweden? If the answer is yes, keep reading as this may be just the right position for you.We are looking for a proactive Assembly Operator...

  • Production Technician/Electrician

    21 hours ago

    Seremban, Negeri Sembilan, Malaysia CS Eco Glass (M) Sdn Bhd Full time 30,000 - 60,000 per year

    Job Description for Technician/ElectricianIdentify and diagnose issues to develop effective troubleshooting strategies to resolve printer technical problems promptly.Maintain detailed records or report of service and maintenance activities.  Document troubleshooting steps and resolutions for future reference.Responsible for plant machinery equipment...

  • Plastic Injection Moulding Technician

    3 days ago

    Seremban, Negeri Sembilan, Malaysia Just Energy Sdn Bhd Full time 40,000 - 60,000 per year

    Setup and mold installation, input parameter and pre-production adjustments and start-up moulding machine operation.Troubleshooting and adjustments of machine parameter if there's product quality issue.Maintenance and upkeep of machineries, tooling, equipment, jigs and fixture.Record moulding data.Arrange machine set-up, mould testing, mould set-up and mould...

  • Supervisor (Workshop Team) - Quality Control

    3 days ago

    Seremban, Negeri Sembilan, Malaysia IDMS TECHNOLOGIES SDN BHD Full time 90,000 - 120,000 per year

    Highlights:Annual salary increment + performance bonusOpportunity for overseas trip / company retreatStaff appreciation & recognition awardsMedical benefits includedWork-life balance culture & supportive team environmentCareer enhancementResponsibilities: Responsible in overseeing workshop daily operations and ensuring machine quality meets standard before...