Jobs: qc welding supervisor
-
Qc Supervisor
4 days ago
Batu Pahat, Malaysia KNIT TEXTILE INTEGRATED INDUSTRIES SDN BHD Full timeQuality Control Oversight: The QC Supervisor is responsible for monitoring and overseeing the entire dyeing and finishing process to ensure that it meets quality standards. This involves supervising various stages of production, including dyeing, colour mixing, finishing, and inspection. 2. Quality Assurance Procedures: The QC Supervisor develops and...
-
QA/qc Inspector
2 days ago
Port Dickson, Malaysia CCIE ENGINEERING (M) SDN BHD Full timeResponsible for ensuring the work scope - inspection related was completely done and in-accordance with the client specification. - Responsible for ensuring the WCS/ WIR was signed and fulfil all hold point for inspection (Fit-up inspection, visual inspection, NDT, painting, valve inspection, reinstatement, pre-inspection, post cleaning inspection, box-up...
-
Qc Supervisor
4 days ago
Johor Bahru, Malaysia Plassein Industry Sdn Bhd Full timeResponsible: - 1. Work closely with all Quality teams on quality objectives and goals to meet the demands for Quality. Ref : Plassein-QP-QUA-02 2. Provide quality support to QA engineer; a) Customer 8D & CAPA - To support QA Engineer with all related quality info in order to complete the report. b) Work with production & Engineering personnel to...
-
Senai, Malaysia AGENSI PEKERJAAN THE SUPREME HR ADVISORY SDN. BHD. Full timeResponsibilities: - Responsible to plan daily schedule allocated manpower and provide task planning by daily basis and monitoring mould change from time to time. - Request material and to ensure a proper operating condition of material and equipment, and the availability of adequate material, equipment and toolbox at production floor i.e. welding set,...
-
QA/qc Supervisor
1 week ago
Pengerang, Malaysia CR3 (MALAYSIA) SDN. BHD. Full time**General** - To ensure the developed quality documentation, and procedures are implemented during the Turnaround. - Directly involved as a verifier for Bolted Flange Joints during the execution **PREPARATION PHASE** - Assist the QA/QC Coordinator with the development of the quality plan in line with the Client quality system. - Review work procedures and...
-
Qc Inspector
6 days ago
Rawang, Malaysia DANCOMAIR ENGINEERING SDN BHD Full timeJob Description - Inspect the job as per approved procedures, client’s specification, applicable code, standards - Ensure HSE requirements are all in place at all time and ensure compliance to HSE regulations - Ensure that the construction quality is in accordance with the approved Project Quality Plan. - Read, understand and implement project related ITP,...
-
Qc Supervisor
4 days ago
Selayang, Malaysia Baba Products (M) Sdn. Bhd. Full time**Job Highlights** - Outstanding career growth & development opportunities - Permanent Position Perform inspections, checks, tests to evaluate incoming raw materials, in-process and finished goods. Perform review of final products to ensure quality specifications are always met. Collect sample & send to QC lab as required. - Conduct in-process...
-
Qc Clerk
17 hours ago
Bayan Lepas, Malaysia Mechmodule Technology Sdn. Bhd. Full time**Job description** - Knowledge on using Micrometer, Indicator, Trimos, Pin gauge, Block gauge, Digital caliper and Profile projector - To ensure invalid and/or documents are promptly removed from all points of use. - Responsible for QC department document filling system. - To compile of daily QC record and compute into QC daily report. - To undertake any...
-
Quality Executive
1 week ago
Senai, Malaysia STEEL ALLY ENGINEERING SDN BHD Full timeTo ensure the fabrication works (cutting, fit-up, welding, galvanizing, painting) are done according to the required specification and quality. - To liaise and coordinate with clients, consultants, sub-contractors, production team and ITA to carry out inspection and testing (including NDT) to check the product quality. - To lead and prepare inspection...
-
Qc Assistant
7 days ago
Batu Caves, Malaysia Sinergia Talents Sdn Bhd Full time**Job Summary**: The QC Assistant will be responsible for assisting in quality control procedures in a fruit processing environment. This role requires a basic understanding of fruits and adherence to QC guidelines to ensure the products meet quality standards. **Responsibilities**: - Follow established QC procedures to ensure the quality and safety of...
-
Qc Supervisor
4 days ago
Port Klang, Malaysia MAPO Industries Sdn Bhd Full timeTo conduct product and process inspection to ensure conformance to product specifications To Plan and lead QC team in daily goods inspection in compliance with procedure and specification To arrange and monitor manpower and ensure that the quality is maintained for incoming, In process and outgoing To maintain close rapport, guide and motivate QC staffs...
-
Qc Technician
6 days ago
Klang, Malaysia VBC ELECTRO-HEAT SDN BHD Full timeList-ID: 102688180Today 14:43 **Job Description**: - Perform all incoming and outgoing QC inspection (raw material, WIP, and FG). Prepare QC reports about daily outcome of QC processes. Check that raw and packing materials are QA approved. Look into customer complaints by investigating the case. Establish, implement, monitor and improve Basic knowledge in...
-
Qc Technician
6 days ago
Shah Alam, Malaysia MALAYSIAN DIE-CASTING INDUSTRIES SDN BHD Full timeTo assist QA / QC Engineer / Head to supervise the QC Inspectors and ensuring only good parts are released. - To check associated quality records and inform the Quality Control Engineer/Head in the event of any products fail to meet specification or observes any unhealthy trends that may lead to non-conformances. - Ensure non-conforming parts are properly...
-
Construction QA/qc Manager- Semiconductor
5 days ago
Penang, Malaysia MSR-FSR Full time**QA/QC Manager Responsibilities -** - The QA/QC Manager role is a single point of contact for all aspects of quality for the contract. The Manager will be responsible for the following list: - Review specifications and review inspection and test plans by Trades and/or discipline leads. Also, will have the authority to require additional test/s included in...
-
Piping Supervisor
6 days ago
Pasir Gudang, Malaysia Dynaciate Engineering Sdn Bhd Full timePrepare daily reports of work progress and man power utilization. - Prepare weekly reports of the total spool erection, isometric weight installed, welded dia inches of supports and joints and the remaining work front with the materials available. - Co-ordinate with the sub contractors to achieve the targets and schedule set by the planning. - Issue the work...
-
Qc Inspector
17 hours ago
Perai, Malaysia Paradigm Aerospace Sdn Bhd Full timeComply with applicable standard, regulation and QMS requirement - Inspect product according to applicable internal and external specification - Prepare inspection report - Maintain and protect measuring equipment - Involve in the gage R&R study - Report on product nonconformity / suspected nonconformity - Involve in maintenance of good 5S - Take up all...
-
Quality Inspector
4 days ago
Pengerang, Malaysia Mentor Solutions & Resources Sdn Bhd Full time**Qualification**: - Minimum Diploma or Vocational Certificate in relevant disciplines - Minimum 5 years of working experience in oil and gas - Inspection and Testing techniques - Familiar with Welding & NDT requirements - Knowledgeable in COMPANY Technical Standards (PTS) - Familiar with Codes and Specifications: ASME II, ASME V, ASME VII, ASME IX,...
-
Qc Supervisor
1 week ago
Port Klang, Malaysia Agensi pekerjaan ns shue sdn bhd Full timeResponsibilities - Perform process inspection to ensure product quality and compliance - Provide guidance and supervision to support comprehensive quality and safety programs to the company, ensuring according to customer and regulatory expectations. ISO 9001 - Coordinate with production department in regards to the production schedule. **Requirements**: -...
-
Qc Leader
17 hours ago
Perai, Malaysia Paradigm Aerospace Sdn Bhd Full timeComply with applicable standard, regulation and QMS requirement - Inspect product according to applicable internal and external specification - Prepare inspection report - Maintain and protect measuring equipment - Planning and arrange task for Inspectors - Involve in the gage R&R study - Report on product nonconformity / suspected nonconformity -...
-
QA/qc Supervisor
6 days ago
Kuala Langat, Malaysia MyMedic Innovation Sdn Bhd Full timePerform daily product Quality Control Check Sheet(Documented) Update and summarizing 1 - 2 years working experiences in Product Quality Control(QC) **Salary**: RM1,700.00 - RM1,900.00 per month COVID-19 considerations: Please wear masks and sanitize your hands upon attending the interview if selected. Ability to commute/relocate: - Kuala Langat:...