![ALLIANCE STEEL (M) SDN BHD](https://media.trabajo.org/img/noimg.jpg)
Production Dept Mechanical Testing Technician
1 week ago
Responsible for the low-level pickling test of the whole class billet; the sample processing and wire-related processing of the wire, threaded bar and H-shaped steel finished work and the supervision class management.
2.Responsible for the sample preparation, low-acid pickling, top test, impact test, tensile test, bending test, metallographic test, hardness test and other related Testing work.
3. Improve and enhance staff skills related to this field.Alliance Steel (M)
Sdn Bhd (ASSB) was established in 2014 and officially commissioned in June 2019, it is the largest steel manufacturer in Malaysia in terms of output capacity and range of products.
ASSB is located in Malaysia-China Kuantan Industrial Park (MCKIP), strategically next to the East Coast Expressway that stretches from Terengganu to Kuala Lumpur.
It is also strategically next to Kuantan Port, which now facilitated with the Deep Water Terminal that ease global waterway transportation.
Aiming to be the exemplar in Malaysian steel industry, ASSB adopting green initiatives in its blast furnace ironmaking and converter steelmaking, apart from focusing on reuse, reduce, and recycle in production process.
Strive to be the most competitive steel manufacturer in Malaysia as well as the ASEAN region, ASSB is certified with the ISO9001:2015 QMS Certification and has its wide products range recognized and certified in various markets and regions.
Diploma / Advanced Diploma / Higher Graduate Diploma / DVM / DKM Level 4 / DLKM Level 5-
Mechanical & Technicians
1 week ago
Kuantan, Pahang, Malaysia TEKSON ELECTRICAL ENGINEERING (KTN) SB. Full timeElectrical engineering technicians work together with electrical engineers in electrical engineering reasearch. They perform technical tasks and aid in the designing, testing, manufacturing and operation of electrical devices and facilities.Our service cantre is fully equiped to assist and facilitate all works. This gives us the edge to superseed other...
-
Mechanical & Electrical Technician
1 week ago
Kuantan, Pahang, Malaysia PUMPCO SDN BHD Full timeBased in Mechanical & Electrical Engineering (major in water pump system) - Install new products, and test them to ensure they are working correctly - Performed installation, maintenance, overhaul and alignment for pumping system - Designed control panel, auto trans, vsd and pumping & pumping system drawing - Perform maintenance and provide customer support...
-
Production Dept Lab Assistant
1 week ago
Kuantan, Pahang, Malaysia ALLIANCE STEEL (M) SDN BHD Full time1) Registered with IKM1. 2)Test iron ore, coal coke and other raw materials strictly in accordance with cnas-cl01 standards and other CNAS standards and operating instructions; 3) Responsible for the normal maintenance and maintenance of laboratory instruments and equipment, check the operation of instruments and equipment according to regulations, and do a...
-
Mechanic
1 week ago
Kuantan, Pahang, Malaysia ALLIANCE STEEL (M) SDN BHD Full timeEnsures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. Locates sources of problems by...
-
Maintence Technicain Mechanical
1 week ago
Kuantan, Pahang, Malaysia engtex Ductile iron pipe industry sdn. bhd Full time1. Install the plant machinery and the equipment according to the instruction of HOD.Repair and maintain the machinery and the machinery and the mechanical equipment, such as engines, motors, pneumatic tools, conveyor systems and production machines and equipment.Dismantle machines and equipment to test their performance.Start machines and equipment to test...
-
Quality Technician
1 month ago
Kuantan, Pahang, Malaysia Sealed Air Corporation Full timeJob Description - Inspecting goods or products according to quality and safety standards.- Providing routine raw material testing for incoming resins and ensuring proper unloading of resin into the silo, conducting tests according to standard operating procedures.- Ensuring quality control measures are in place to support Manufacturing operations and...
-
Iron Ore Testing Technician
1 week ago
Kuantan, Pahang, Malaysia ALLIANCE STEEL (M) SDN BHD Full time1. Responsible for sampling and sample making of raw materials and auxiliary materials, semi-finished products and finished products in the production process; 2. Responsible for sample preparation according to relevant testing standards, specifications or operating instructions; 3. Responsible for training of sampling and preparation personnel, formulation...
-
Storekeeper, Production Dept
1 week ago
Kuantan, Pahang, Malaysia ALLIANCE STEEL (M) SDN BHD Full time1. Record inventory sparepart every month. 2. Make sure the cleaniness of the store. 3. Make purchasing spare part on system. 4. Resolve matters regarding spare parts and store issues.Alliance Steel (M)Sdn Bhd (ASSB) was established in 2014 and officially commissioned in June 2019, it is the largest steel manufacturer in Malaysia in terms of output capacity...
-
Latheman, Production Dept
1 week ago
Kuantan, Pahang, Malaysia ALLIANCE STEEL (M) SDN BHD Full time1. Responsible for the execution of pass drawing and turning standards, processing of various types, making sure that the drawing, sample and pass conform to the requirements of the drawing, as well as the turning deviation and surface roughness. 2. Responsible for the processing tasks assigned by the section, set up the ledger, and managed it in an orderly...
-
Chargeman Production Technician
1 week ago
Kuantan, Pahang, Malaysia Wilhelmina Energy Malaysia Sdn. Bhd. Full timeJob title: Chargeman A4 cum Production TechnicianJob Status: Contract/ PermanentReporting To: R&D ManagerMinimum Requirements: Minimum Certificate in Electrical Engineering from reputable Polytechnic/University Minimum 3 Year(s) of working experience in the related field is required for this position. Strong knowledge of Malaysian Codes, Regulations and...
-
Kuantan, Pahang, Malaysia ALLIANCE STEEL (M) SDN BHD Full time1. Publicize and implement all rules and regulations of the company and the Department, and organize drivers to learn all safety management regulations. 2. Be responsible for the safety education of employees, improve the regular safety meeting system, organize and arrange the safety learning and safety inspection of each team, hold the safety analysis...
-
Hvac Technician
1 week ago
Kuantan, Pahang, Malaysia Club Med Full timeDuties and Responsibilities: Under responsibility of Technical Services Manager Ensuring the maintenance and repairing of refrigeration and air conditioning equipment (versatile hotel technic) Regularly carrying out preventive maintenance measures: Changing of faulty pieces, set up of installations, adjustment of new equipment and also in other fields...
-
Coking Plant Mechanical Inspector
1 week ago
Kuantan, Pahang, Malaysia ALLIANCE STEEL (M) SDN BHD Full time1. Proficient in general mechanical equipment and production technology, technical control of newly added equipment technical transformation projects, technical transformation of equipment failure points, and be prepared to work during holidays. Be familiar with mechanical drawings, be proficient in CAD, and related office software. 2. Responsible for the...
-
Hvac Technician
1 week ago
Kuantan, Pahang, Malaysia Club Med Full timeDuties and Responsibilities: Under responsibility of Technical Services Manager Ensuring the maintenance and repairing of refrigeration and air conditioning equipment (versatile hotel technic) Regularly carrying out preventive maintenance measures: Changing of faulty pieces, set up of installations, adjustment of new equipment and also in other fields...
-
Energy & Power Dept Electrical Maintenance
1 week ago
Kuantan, Pahang, Malaysia ALLIANCE STEEL (M) SDN BHD Full time1. Assist the substation accident and abnormal treatment, on-site Switching operation, work ticket processing (final, acceptance), regular cutting (round) change test, on-site safety measures, etc. 2. Responsible for the maintenance and repair of various electrical first and second equipments such as a 275KV, 7 35KV, 3 10KV substations, street lamps,...
-
Finance Dept Billet Management Squad Leader
1 week ago
Kuantan, Pahang, Malaysia ALLIANCE STEEL (M) SDN BHD Full time1. Responsible for the sorting, shovel, and furnace rolling of the billet in the responsible on-site workshop area. 2. Responsible for the organization and planning of the site in the responsible on-site workshop area. 3. In conjunction with the steel-making Testing station, the rolling mill must be meticulous, and the production should be carried out...
-
Kuantan, Pahang, Malaysia ALLIANCE STEEL (M) SDN BHD Full time1. Responsible for lifting, unloading and loading scrap, and providing stable scrap supply for steelmaking production. 2. Regularly maintain the vehicle, timely find and deal with equipment faults. 3. Train local staff for operation.Alliance Steel (M)Sdn Bhd (ASSB) was established in 2014 and officially commissioned in June 2019, it is the largest steel...
-
Steel Slag Main Control Technician
1 week ago
Kuantan, Pahang, Malaysia ALLIANCE STEEL (M) SDN BHD Full time1. Assist the manager of production control in production especially converter workshop. Organize the production of the converter, and work hard to fully complete the production tasks. 2. Responsible for working with the company's general production control technician and the iron making plant production control technician, keeping abreast of the molten iron...
-
Kuantan, Pahang, Malaysia ALLIANCE STEEL (M) SDN BHD Full time1. Responsible for the unpacking, acceptance and distribution of goods in and out from the warehouse, arrange the spare parts on the shelves, and adding material cards. 2. Familiar with the specifications, parameters and performance of electrical equipment in the metallurgical industry. 3. Familiar with the operation of NC system, providing technical support...
-
Weighman, Finance Dept
1 week ago
Kuantan, Pahang, Malaysia ALLIANCE STEEL (M) SDN BHD Full time1. Master the basic operation of the measurement squad leader of the "unattended" weighing system. The "unmanned" weighing system is a Chinese-led system developed by CCID for the informationization of the United Steel Group. 2. Familiar with the specifications, models and types of finished materials, semi-finished products and related by-products, and...