Jigs and Fixture Designer

Main Responsibility: To assist the Engineer in fabricating & repair the fixture & test boardJob Description: 1. Fabricate jig & fixture (Machining / Assembly / Wiring). 2. To repair, improve or modify jig and fixture 3. Troubleshoot jig and fixture failure. 4. To assist Asst.Engineer in conducting the Verification Minimum Requirement(s): 1. SPM/ Certificate...

Main Responsibility: To assist the Engineer in fabricating & repair the fixture & test boardJob Description: 1. Fabricate jig & fixture (Machining / Assembly / Wiring). 2. To repair, improve or modify jig and fixture 3. Troubleshoot jig and fixture failure. 4. To assist Asst.Engineer in conducting the Verification Minimum Requirement(s): 1. SPM/ Certificate...

Established since Ohnishi are doing a Designing, Fabricating Production Tools Jigs & Fixture such as FunctionTest Fixture/Jig (FCT), Bare Board Test Fixture/Jig, Semi Automation System, Order and Made Product for Production Usage.Diploma / Advanced Diploma / Higher Graduate Diploma / DVM / DKM Level 4 / DLKM Level 5

A. Primary job function1.1 To perform maintenance and repairing of jigs and fixtures on the production floor.1.2 To generate standard time for any new model.1.3 To carry out process evaluation when required.1.4 Maintain and update standard time due to the change of process.1.5 Ensure all IE preparation such as jig, PWI, program and tools are available on...

Responsible: Check compressor and air dryer. Remove water in water tank reservoir. Check tooling tower- check all running machine, to conduct daily molding machine preventive maintenance checklist followed Work Instruction (WI). Add lubricant oil for Lanson machine and add oil for toggle at Haitian Machine. Check jig and update weekly maintenance checklist...

Responsibilities:Review customer drawing and provide DFM (Design for Manufacturability) proposal, if require. Responsible for all NPI and ECN on time sample submission without FAIL. Create BOM, Process Drawing, Work Instruction & Packing Standard. Support Sales in providing tool/project costing and Gant Chart. Design and modification of strip-layout,...

Maintenance Job: Study countermeasure for any quality, machine and method failure: Evaluate rejects, implement corrective action, follow-up and evaluatethe effectiveness of action taken:Exercise preventive maintenance activities to minimize breakdownof jigs and fixtures and equipment: Check and verify the Maintenance activities in accordance withMaintenance...

1. Primary job function1.1 To perform various machine set-up upon requested by production.1.2 To perform audit, trouble shoot and maintenance of all equipment.1.3 To perform change of model as per planning schedule.1.4 To optimize the program as to achieve well balance cycle time.1.5 To attend the machine immediately when break down and change model.1.6 To...

An interior designer is a creative and skilled professional responsible for planning, designing, and executing interior spaces that are both functional and aesthetically pleasing. Interior designers work with clients to understand their preferences, needs, and requirements, and then create design concepts that align with the client's vision while adhering to...

Location:Adda Heights, Johor BahruMonday to Friday 9am to 6pmJob description: Collaborate with clients to understand their design preferences, functional requirements, and budget constraints. Develop design concepts, mood boards, and presentations that effectively communicate your vision to clients. Create detailed floor plans, elevations, and 3D renderings...

Company descriptionFlatpak is a design-to-make company, focusing on wood and panel based products. We provide a one-stop solution for digital carpentry projects operating at our factory based in Johor Bahru, where we envision to make furniture design simple and accessible for everyone. We strongly believe that we can deliver quality products with minimum...

CNC Machinist (lathe)Working Days: Mon - FriWorking Timing: 8.00am - 5.30pmWorking Location: TuasSalary: Basic + OTResponsibilities: Maintain a clean and organized work area on a daily basis. Conduct daily/monthly/yearly machine and tool periodic maintenance program. Organized and store machining fixtures & jigs for future use. Identify parts/tools that need...

Installing, repairing, and maintaining electrical wiring, equipment, and fixtures in buildings or industrial settings Troubleshooting problems with existing electrical systems in order to determine appropriate solutions for repairInstalling or repairing wires and cables to provide power to buildings or machineryInstalling wiring devices, such as light...

**DRAFTER/DESIGNER**1) Membuat dan melukis pelan dan reka bentuk teknikal untuk projek pembinaan dan renovasi.2) Berkolaborasi dengan jurutera dan arkitek untuk memahami keperluan projek.3) Menyesuaikan dan menyelaraskan reka bentuk dengan peraturan tempatan dan piawaian industri.4) Menghasilkan gambaran teknikal 2D dan 3D bagi memvisualisasikan konsep reka...

Carpentry and related work such as: - constructing, erecting, installing and repairing structures and fixtures made of wood, plywood etc Must be familiar with woodworking machinery such as edge bending machine, panel saw, sanding machine, molder and other wood cutting machine. Read blueprints, drawings or sketches to fully understand the requirements. Taking...

1. Merancang dan melaksanakan konsep reka bentuk dalaman yang sesuai dengan keperluan dan cita rasa pelanggan.2. Melakukan tinjauan tapak, mengumpul maklumat, dan berkomunikasi dengan pelanggan untuk memahami keperluan mereka.3. Membuat sketsa, lukisan 3D, dan model komputer untuk mengilustrasikan idea dan konsep reka bentuk dalaman.4. Memilih dan...

1. Communicating with engineers, and incorporating knowledge gained into drawings. 2. To prepare design proposal, layout plans, Autocad Drawings & Solidworks Drawings. 3. Able to deliver work and drawings in an efficient and timely manner. 4. To prepare engineering drawing using AutoCAD and SOLIDWORK design software 5. Familiar with engineering workshopKW...

1. Reviews and follows blueprints and building plans.Maintains occupational safety standards.Performs repairs on malfunctioning or substandard fixtures and walls.Lays out floors, scaffolding, and roofs.Executes the engineer's and the architect's building designs.Job Type: ContractContract length: 60 monthsSalary: RM2, RM2,500.00 per monthSchedule: Day...

Overview:The Toolroom Technician (Toolmaker) is responsible for the fabrication, maintenance, and repair of precision tools, dies, and fixtures used in the manufacturing process. This role requires expertise in machining, a keen eye for detail, and the ability to work from technical drawings and specifications. The Toolroom Technician will collaborate with...

1. Installing, maintaining and repairing plumbingFitting bathroom and kitchen fixtures like sinks and toiletsDesigning pipe schematics for buildingsPlanning the water systems of a cityFixing appliances like washing machines and dishwashersInterpreting blueprintsCutting and welding pipesUnderstanding plumbing codes and regulationsJob Type: ContractContract...