Ipqc
5 days ago
Responsible:
- 1. Shall properly inspected parts follow AQL 0.4% LII **Remark: All IPQC Must have AQL card. 2. To check the parts inside the carton in 2 hourly basis and also do sampling check for those parts on conveyor. IPQC need to fill up & complete the Checklist. 3. Must follow 1st piece set-up condition samples & customer approval samples if deem needed. 4. Must properly inspected such as scratches, dented, sink mark, shot mold, flashes, high gating, over-cut, etc. 5. Must ensure operator follow Work Instruction (WI). 6. Ensure Jam part & auto parts (small parts after degating & weighing ) pack every 2 hours for inspection (Chop after complete inspected). 7. Any wrong doing by operator, must immediately alert to Production Leader/Supervisor. 8. If Reject, must put the warning light and turn on the alarm at the machine >>> highlight to Production team to make adjustment >>> On-Hold the lot with on hold tag >>> post the status to the WHATAPPS group >>> After 15min, follow up the status after adjustment. Post to Stop Machine group after 4 hours no any improvement. **Remark: If prod did not take any immediate action, QA Engineer shall need to bring out at the Gyat meeting. (Fill up the reject information check sheet) 9. Ensure the label is correct a. Part Name b. Part Number c. Tooling d. Quantity **Remark: All IPQC must have Part Name & Number card. 10. If Accept, verify by IPQC & stamp on the carton box label. (Stamp at the IPQC square box properly) 11. To ensure any non-conformances or abnormality detected during inspection and immediately reported to the leader. a) If still have repeated issue after Production improved parts quality, IPQC shall feedback to QA Leader for him to engage with QA Supervisor. QA supervisor shall engage with production team for further improvements. b) For those repeated issue claimed by customer, IPQC shall need to receive training with complete training record & report from QA Leader/ QA Supervisor. c) To ensure production to improve parts defect within 2 hours and continuously follow up per hour. If there's still no any improvement until 4 hours, IPQC need to feedback to IPQC leader. He/she have to publish in 'œStop Machine'
- whatsapp group. 12. To ensure all IPQC report complete and verified by QA Supervisor ; 13. To ensure that proper care is taken when handling various equipment; 14. Good discipline to be maintained at all times. 15. Ensure good housekeeping at working area according to 5S requirement.
Plassein Industry Sdn Bhd Is a Plastic Injection Moulding company, established in June 2005.
SPM / O Level / SKM Level 1 / SKM Level 2 / SKM Level 3 or Equivalent
-
Qc Technician
7 months ago
Johor Bahru, Malaysia Nihon Pigment Sdn Bhd Full time**Responsibilities**: - Perform In-Process Quality Control (IPQC) tests eg. MFR/MFI, Filler Content, and Moisture Level - Update on results of IPQC testing promptly to Senior Supervisor - Perform formulation adjustments when necessary - Enter data into the database - Mould test bars for testing - Maintain updates of documents and proper filing - Good...
-
[jv2] Qc Technician
7 months ago
Johor Bahru, Malaysia Nihon Pigment Sdn Bhd Full time**Responsibilities**: - Perform In-Process Quality Control (IPQC) tests eg. MFR/MFI, Filler Content, and Moisture Level - Update on results of IPQC testing promptly to Snr Supervisor - Perform formulation adjustments when necessary - Enter data into the database - Mould test bars for testing - Maintain updates of documents and proper filing - Good...
-
Qc Technician
2 weeks ago
Johor Bahru, Malaysia Nihon Pigment Sdn Bhd Full time**Responsibilities**: - Perform In-Process Quality Control (IPQC) tests eg. MFR/MFI, Filler Content, and Moisture Level - Update on results of IPQC testing promptly to Senior Supervisor - Perform formulation adjustments when necessary - Enter data into the database - Mould test bars for testing - Maintain updates of documents and proper filing - Good...
-
[jv2] Qc Technician
2 weeks ago
Johor Bahru, Malaysia Nihon Pigment Sdn Bhd Full time**Responsibilities**: - Perform In-Process Quality Control (IPQC) tests eg. MFR/MFI, Filler Content, and Moisture Level - Update on results of IPQC testing promptly to Snr Supervisor - Perform formulation adjustments when necessary - Enter data into the database - Mould test bars for testing - Maintain updates of documents and proper filing - Good...
-
QA Supervisor
7 months ago
Johor Bahru, Malaysia Plassein Industry Sdn Bhd Full timeResponsible: - 1 Work closely with all Quality teams on quality objectives and goals to meet the demands for Quality. Ref : Plassein-QP-QUA-02 2 Provide quality support to QA engineer; a) Customer 8D & CAPA - To support QA Engineer with all related quality info in order to complete the report. b) Work with production & Engineering personnel to resolve all...
-
Qc Technician
7 months ago
Johor Bahru, Malaysia Nihon Pigment Sdn Bhd Full timeJob Responsibilities: - Perform In-Process Quality Control (IPQC) tests eg. MFR/MFI, Filler Content, and Moisture Level - Update on results of IPQC testing promptly to Senior Supervisor - Perform formulation adjustments when necessary - Enter data into the database - Mould test bars for testing - Maintain updates of documents and proper filing - Good...
-
Qc Supervisor
2 weeks ago
Johor Bahru, Malaysia ABLEJECT SDN BHD Full time**JOB DESCRIPTION** - Responsible for daily QC work allocation and ensure completion - Ensure on-time delivery of customer shipment - Control daily production rejection rate - Report dimensional and inprocess quality escape - Perform 2hrs sampling to ensure quality compliance - Maintain QC equipment calibration - Liaise with production to closure on...
-
Ipqc/qa Inspector
1 week ago
Johor Bahru, Malaysia PLL PACKAGING SDN BHD Full time1. Perform incoming, in-process and outgoing inspection. 2. Generate reports and present data analysis to QA Supervisor. Other duties assigned by the QA Supervisor from time to time. 3. Develop standard protocols in carrying out in-house experiments/ testing. 4. Study and analyze customers' complaints and problems encountered by workers. 5. Make sure records...
-
QA Manager
7 months ago
Johor Bahru, Malaysia Kako Suntax (M) Sdn Bhd Full time**Responsibilities**: Ensure quality issues are addressed on time and review for closure. Implement quality initiatives and maintain / enhance QMS. Liaise with customer on quality requirement / issues. **Job Requirements**: - At least 5 years experience in related field. - Knowledge in Quality Management System (ISO 9001/13485/14971/14000, TS16949. -...
-
Syarikat Wen Ken Drug Sdn Bhd
6 days ago
Johor Bahru, Malaysia Wen Ken Drug Co. Pte Ltd Full time**Responsibilities**: - 1- Melakukan kerja pembungkusan mengikut.( Rujuk BMR ) - 2- Melakukan kerja-kerja pengisian mengikut sukatan yang telah diberikan mengikut setiap produk. - 3- Memastikan bahan-bahan yang digunakan semasa pembungkusan adalah tepat dan betul mengikut setiap produk. ( Rujuk MRF ) - 4- Memastikan cetakan **,mfg dan tarikh luput bagi...
-
Syarikat Wen Ken Drug Sdn Bhd
6 days ago
Johor Bahru, Malaysia WEN KEN DRUG CO. PTE LTD Full time1- Melakukan kerja pembungkusan mengikut.( Rujuk BMR ) 2- Melakukan kerja-kerja pengisian mengikut sukatan yang telah diberikan mengikut setiap produk. 3- Memastikan bahan-bahan yang digunakan semasa pembungkusan adalah tepat dan betul mengikut setiap produk. ( Rujuk MRF ) 4- Memastikan cetakan no.lot,mfg dan tarikh luput bagi setiap produk adalah betul. (...
-
Qc Leader
4 days ago
Johor Bahru, Malaysia ABLEJECT SDN BHD Full timeInspection of loose carton boxes, rework or assembly parts - Verify 2 hours samples directly from machine and sample verification. - Ensure all job completed (quality record, OG reports, all good parts are stored-in, line clearance of the machine & Daily QC report) at end of the shift - Liaise with production supervisor or technician to follow up on closure...
-
Production Operator
11 hours ago
Johor Bahru, Malaysia Syarikat Wen Ken Drug Sdn Bhd Full time** Fixed bonus (1.5 bulan)** ** Public Holidays 18 days** ** Over Time** **SKOP KERJA DAN TANGGUNGJAWAB UNTUK PEKERJA AM** - Melakukan kerja pembungkusan mengikut prosedur yang ditetapkan (Rujuk BMR). - Melakukan kerja-kerja pengisian mengikut sukatan yang telah diberikan mengikut setiap produk. - Memastikan bahan-bahan yang digunakan semasa pembungkusan...
-
Panel Beater/钣金工
7 months ago
Johor Bahru, Malaysia Borneo Motors Full time**This role required to work in Singapore** **Who We Are** At **Inchcape Singapore**, we operate a multi-brand vertically integrated business model, distributing and retailing world leading marques. We pride ourselves on the amazing team, products and services that we have built and represent. The driver behind our growth and reliable brand is **OUR...
