CNC Turning

5 months ago

Bayan Lepas, Malaysia RC Precision Engineering Sdn Bhd Full time

**Main Job Duties**
- Program, operate and machine parts for production using Mazaks, lasers, mills, lathes and other power and handheld tools. Operate and maintain lathes, drill presses, milling machines
- Provide programming support while setting up & operating Mazak CNC Lathes to fabricate metallic and non-metallic parts.
- Set up and operate Mazak CNC Lathes - Utilize knowledge of working properties and machining processes for a wide variety of materials
- Manufacture components within the allotted time estimates provided on the job travelers
- Make process recommendations for improved efficiency and work to optimize processes, programs and cutting tools.
- Take a proactive approach to continuous improvement including productivity, quality, safety, environmental and ergonomics.

**Essential Job Functions**
- Program, setup, and operate Mazak Multi-axis Turning Centres with mínimal supervision.
- Utilize as many machine tool resources as possible at all times, which may require employees to run multiple machines simultaneously.
- Have proficient knowledge of G&M codes with the ability to perform manual program edits as required to effectively complete job work scope.
- Read and interpret customer drawings with an understanding of Geometric Dimensioning and Tolerancing per ANSI Y-14.5
- Inspect work produced (1st piece and in-process inspection) using precision measuring equipment including: micrometres, bore gauges, dial callipers, or other measuring instruments to verify conformance to specifications. Maintain tolerances as close as 0.0005″.
- Where required, document inspection results on supplied Inspection Documentation Sheets and/or Inspection Prints.
- Keep equipment (machine, gauging, tooling, etc.) clean while maintaining a clean and orderly work area.
- Follow preventative maintenance procedures on equipment as prescribed by the supervisor and report operating difficulties of equipment.
- Document daily activities to assure performance in accordance with job standards.
- Work effectively with peers and management in a team-oriented environment, assisting/training other employees as required.
- Willing to work overtime when needed to satisfy customer requirements.
- Perform duties in accordance with Company Policies including, but not limited to attendance, confidentially, safety and work practices, and substance abuse.
- The employee may be required to follow other job-related instructions and to perform other job-related tasks as required by supervisor.

**Job Requirement**:

- Min SPM or equivalent qualification.
- Extensive experience of CNC Turn using Mazak
- Must be able to Set and operate the machines.
- Have a good understanding of engineering drawings.
- Must be a proactive team player, with a positive ‘can do’ attitude.
- Excellent verbal and written communication.
- Applicants must be willing to work in Bayan Lepas
- Have Valid Driving License
- Master-Cam CNC programming experience & Experienced working in ISO-9001 or AS9100 quality environment is an added advantage

**Salary**: RM3,000.00 - RM5,000.00 per month

**Benefits**:

- Free parking
- Opportunities for promotion
- Professional development

Schedule:

- Monday to Friday

Supplemental pay types:

- Yearly bonus

Ability to commute/relocate:

- Bayan Lepas: Reliably commute or planning to relocate before starting work (required)

**Experience**:

- Handling MAZAK Machine: 2 years (required)

**Language**:

- English (required)

License/Certification:

- driving license (required)

  • CNC Turning Programmer

    5 months ago

    Bayan Lepas, Malaysia MYJOBSTEK CAREER QUEST Full time

    To interpret drawings and technical specifications to determine the process, programming, and suitable cutting tool for CNC Swiss Lathe, Turning, Turn Mill and Auto-lathe machines. - Responsible to produce the parts that meet customer specifications by adjusting and configuring the machine settings during First Article (FA) - To conduct Continuous...

  • CNC Machinist

    5 months ago

    Bayan Lepas, Malaysia Foresight Asia Pacific Sdn Bhd Full time

    _**Key responsibilities**:_ - Positive team player - Supports continuous improvement programs - Setup simple jobs, including tool and geometry offsets - Read and interpret blueprints properly - Inspect parts to verify blueprint requirements prior to first article - Properly transfer CNC programs - Quickly and accurately load and unload machines - Make...

  • CNC Machinist

    5 months ago

    Bayan Lepas, Malaysia Foresight Asia Pacific Sdn Bhd Full time

    _**Key responsibilities**:_ - Positive team player - Supports continuous improvement programs - Setup simple jobs, including tool and geometry offsets - Read and interpret blueprints properly - Inspect parts to verify blueprint requirements prior to first article - Properly transfer CNC programs - Quickly and accurately load and unload machines - Make...

  • CNC Machinist

    5 months ago

    Bayan Lepas, Malaysia Prodelcon Full time

    **Responsibilities**: - Able to develop a program for CNC lathe in accordance with the given drawing. - Set-up jobs, which include tool and geometry offsets. - Read and interpret drawings accurately. - Inspect FA part to verify drawing requirements before sending to QA. - Comply with the process traveller and quality system procedures. - Have the ability to...

  • CNC Machinist

    5 months ago

    Bayan Lepas, Malaysia Advantest (M) Sdn Bhd Full time

    Job Summary: 1. Plans machining by studying work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T). 2. Take measurement and mark material for cutting and shaping. 3. Programs mills and lathes by...

  • Accounts Executive

    7 months ago

    Bayan Lepas, Malaysia AMBEST TECHNOLOGY SDN BHD Full time

    AMBEST TECHNOLOGY SDN BHD is a manufacturer of high precision machining components, jigs & fixtures. We specialize in CNC Milling, Turn Mill, Turning and Sheet Metal. Bachelor's or Equivalent

  • CNC Turning Machinist

    5 months ago

    Bayan Lepas, Malaysia Mechmodule Technology Sdn. Bhd. Full time

    **Requirement** *At least 2 year(s) of working experience in the related field is required for this position. *Preferably Non-Executive specialized in Engineering - industrial or equivalent. *Able to read, understanding and interpret technical drawings. *Required Skill(s) : Experience in fabrication parts and work...

  • Machinist

    5 months ago

    Bayan Lepas, Malaysia MICRO MECHANICS TECHNOLOGY SDN BHD Full time

    GENERAL DUTIES Set and Operates conventional and CNC machines to perform machining and / or assembly of parts and/or secondary process operations; performs in-process inspection; ensure meeting quality, cost & cycle time target; enters data and maintains records REPRESENTATIVE MAJOR FUNCTIONS a) Sets and operates conventional machines milling, grinding and...

  • Materials Planning Executive

    5 months ago

    Bayan Lepas, Malaysia AMBEST TECHNOLOGY SDN BHD Full time

    Responsible for planning & scheduling Finish Good build plan by optimizing line loading. - Responsible for production planning, improving on manufacturing JIT, 1st commit & delivery performance. - Handling daily production planning issues, execution & coordination of production related job tasks. - Coordinate in material planning (MRP) & capacity planning -...

  • Production Operator

    5 months ago

    Bayan Lepas, Malaysia MICRO MECHANICS TECHNOLOGY SDN BHD Full time

    GENERAL DUTIES Set and Operates conventional and CNC machines to perform machining and / or assembly of parts and/or secondary process operations; performs in-process inspection; ensure meeting quality, cost & cycle time target; enters data and maintains records REPRESENTATIVE MAJOR FUNCTIONS a) Operates conventional machines to perform turning, grinding,...

  • Buyer

    7 months ago

    Bayan Lepas, Malaysia GREATECH INTEGRATION (M) SDN BHD Full time

    Responsibilities:.Planning and sourcing of require goods. Sourcing new and review existing goods to ensure goods remain competitive. Liaising with existing supplier/vendor, negotiating prices and delivery. Evaluates supplier/vendor on prices, quality of products and average shipping times. Preparing purchase orders, expedite orders and delivery. Maintaining...