E&i Technician
5 months ago
**Responsibilities**
- Responsible to complete execution for preventive maintenance, corrective maintenance, breakdown maintenance, equipment overhauling as per COMPANY’s maintenance plan with compliance to manufacturer standard / COMPANY’s standard,
- Receive work orders (maintenance job cards) from the CONCOR Team Leader and carry out works (campaign for an offshore mission) as per laid down procedures, schedules and/or instructed by CONCOR Team Leader, adhering to the plant safety procedures,
- Responsible to ensure material, equipment, and tool readiness as required for work execution,
- Report any abnormalities found on equipment to COMPANY’s maintenance team leaders immediately to ensure proper actions are taken in a timely manner to maintain the reliability of the equipment/plants,
- Responsible to provide information to CONCOR Team Leader for completed maintenance reports,
- Perform routine tests of standby equipment and troubleshoot defective equipment as instructed. Repair and restore the equipment back to its serviceable condition. Report abnormity or discrepancy.
- Follow and encourage strict adherence to the COMPANY's HSE policy and regulations in all work under the responsibility and directly report to CONCOR Team Leader
- Ensure that preventive maintenance, corrective maintenance, routine and non-routine works are accurately and efficiently done within the timeframe,
- Ensure that the works carried out, are of the highest levels of quality,
- Ensure that tools and equipment at the worksite are kept in good working conditions,
- Ensure good cooperation and strong relationships with team members, COMPANY’s personnel, various external parties and communities to contribute smooth operation and good working environment,
- Comply with COMPANY’s Standards, HSE, Regulations, and laws requirements.
**Qualification & Experience**
- Diploma or higher in Electrical & Instrument or related field.
- Minimum 5 years field working experience in maintenance of electrical and/or instrument equipment in Offshore Oil and Gas industry or similar.
- Good knowledge and experience on P&ID, Loop diagram, Termination drawing,
- Capable to perform instrument calibration for Pressure, Temperature, Flow and Level transmitters and perform function test control valve and on-off valve
- Electrical safety training/ electrical isolator training.
- Swagelok Fitting and tubing or on the job experience,
- Basic hydraulic and pneumatic operation system or on the job experience,
- Possess a valid BOSEIT and Medical Certificate
- Fairly command of written and spoken English and Thai,
- The moderate physical effort of standing, walking, climbing for 50% of work time.
**Job Type**: Contract
Contract length: 24 months
Pay: RM200.00 - RM380.00 per day
Application Question(s):
- What is your Current Salary / Last Drawn Salary?
- What is your Salary Expectation (daily in MYR)?
- What is your Notice Period / Availability?
**Education**:
- Diploma/Advanced Diploma (preferred)
**Experience**:
- maintenance of electrical and/or instrument equipment: 5 years (preferred)
- Offshore Oil and Gas industry: 5 years (preferred)
**Language**:
- Thai (required)
License/Certification:
- BOSEIT (preferred)
- Medical Certificate (preferred)
-
Corrosion Technician
5 months ago
Kota Kinabalu, Malaysia Oceancare Corporation Sdn Bhd Full timeMinimum SPM or equivalent with minimum FIVE (5) years' experience in Corrosion Monitoring activities such as process corrosion, Cathodic Protection and UT - Certified AMPP/NACE International Cathodic Protection Tester or IMM Corrosion Technician Levek I or IMM CP Technician Level I or equivalent. - PCN/CSWIP/JPK/ASNT/ACCP Level II for UT -...
-
Marine Technician
5 months ago
Kota Kinabalu, Malaysia E&P O&M Services Sdn Bhd (EPOMS) Full time1. Operate marine and its associated utility systems safely and in compliance with the requirements of the management system. 2. To carry out duty rounds and check the running status for all marine machineries and equipments during the shift and take the parameters readings using data logger. 3. To assist Panel Operator (Senior Technician) for the operation...
-
Ex Inspector
5 months ago
Kota Kinabalu, Malaysia MRA INTERNATIONAL SDN BHD Full time**REQUIREMENTS** Sabahan or Have a valid Sabah permit **JOB DESCRIPTIONS** - Responsible to inspect the installation for EX equipment and prepare the inspection checklist report. - installation of electrical and instrument cable in accordance with specified procedures and job plans. - Assist and supervise technician on installation & Electrical and...
-
Elv Junior Technician
5 months ago
Kota Damansara, Malaysia Infoline Solutions Sdn Bhd Full time**Responsibility** - Technician for network/CCTV/Door Access/ Building Automation/Electrical & Electronic related works - To perform system diagnose and troubleshooting - To perform preventive and corrective maintenance activities - To attend a breakdown call as required per SLA - To perform installation of new system if required - Compile and submission of...
-
Elv Junior Technician
5 months ago
Kota Damansara, Malaysia Infoline Solutions Sdn Bhd Full time**Responsibility** - Technician for network/CCTV/Door Access/ Building Automation/Electrical & Electronic related works - To perform system diagnose and troubleshooting - To perform preventive and corrective maintenance activities - To attend a breakdown call as required per SLA - To perform installation of new system if required - Compile and submission of...
-
Technician I
5 months ago
Kota Kinabalu, Malaysia Marriott International, Inc Full time**Job Number** 24018405 **Job Category** Engineering & Facilities **Location** Le Méridien Kota Kinabalu, Jalan Tun Fuad Stephens, Kota Kinabalu, Sabah, Malaysia VIEW ON MAP **Schedule** Full-Time **Located Remotely?** N **Relocation?** N **Position Type** Non-Management *** Inspect, repair, and maintain HVAC, air quality control, and refrigeration...
-
Technician-audio Visual
5 months ago
Kota Kinabalu, Malaysia Marriott International, Inc Full time**Numer oferty** 24091433 **Kategoria oferty pracy** Event Management **Lokalizacja** Kota Kinabalu Marriott Hotel, Lot G-23A, Kota Kinabalu, Sabah, Malaysia ZOBACZ NA MAPIE **Harmonogram** Full-Time **Zdalna lokalizacja?** N **Przeprowadzka?** N **Rodzaj stanowiska** Non-Management - Marriott International jest pracodawcą zapewniającym równe...
-
Technician
5 months ago
Kota Kemuning, Malaysia GENERAL SYSTEM ENGINEERING SDN BHD Full time1. Responsible for the project’s testing and commissioning, servicing & breakdown tasks 2. Develop, build and improve the efficiency of the control panel for the machine/system is an added advantage 3. Knowledge in design electrical wiring diagram complete with I/O, PLC panel for the machine/system 4. Knowledge in timely, up-to-date and accurate...
-
Csr for Diving Rov
5 months ago
Kota Kinabalu, Malaysia EP ENGINEERING SDN. BHD. Full timeJob Description - A holder of IMCA International Marine Contractors Association ) or AODC (Association of Offshore Diving Contractors) Diving Supervisor Certificate. - Must have a minimum of 15 years working experience as Air or Saturation Diver and/or ROV Pilot Technician in underwater construction, inspection, maintenance and repair projects, Diving/ROV...
-
Technician-m&i (Kl, Sdk)
5 months ago
Kota Kinabalu, Malaysia Pansar Company Sdn Bhd Full timeMultiple work locations: - Kuala Lumpur - Sibu - Tawau - Sandakan - Kota Kinabalu Job Requirements: - Vocational/ MLVK/ Certificate from Technical Institute or equivalent. - Preferable technical experience in Marine and Industrial. - Must be willing to travel. - Medical, miscellaneous allowances - Insurance coverage In 1961, Pan Sarawak Trading Company, the...
-
Operations Technician
5 months ago
Kota Kinabalu, Malaysia E&P O&M Services Sdn Bhd (EPOMS) Full timeTo assist CSUP acting as Cargo Operator, executing watches in CCR - To understand the operation of the cargo and ballast systems. - To be fully familiar with rules, regulations and work procedures applicable to the task to be executed - Monitoring, controlling and logging imported and produced oil loading and distribution on board as instructed by the CSUP...