Qc Inspector

**Job Summary**
- QC Inspector shall perform dimensional and visual inspection on the raw, partially finished and finished products following the engineering drawings. The inspector shall complete the inspection tasks per BOM and SAP based mfg. routings and follow the work assignments given by QC Supervisor. QC Inspector shall also perform Hardness testing using Rockwell and Brinell tests methods.

**Roles and Responsibilities**
- Interpreting engineering drawings & GD&T requirements performs thorough dimensional inspection and completes inspection checklist provided by the machine shop. The QC Inspector shall be competent to understand and read Engineering drawings and SAP transactions.
- Inspector shall be competent to raise NCRs when nonconforming conditions are detected.
- Must be capable of using dimensional measuring instruments like thread ring/plug gauges, ball gauges, micrometers, calipers, indicators, profile projectors, and Brinell hardness test equipment as well as CMM equipment.
- The dimensional inspector shall be able to work in Receiving inspection, in-process inspection and final inspection areas based on the assignments
- Shall be able to update and revise SAP based NCRs based on Engineering disposition.
- QC Inspector shall follow specific NCR generation guidelines to create adequate non conforming reports.
- Inspector shall be well versed in understanding functions and usage of all required measuring instruments
- Shall be competent in performing calibration and maintaining computer based calibration program.
- Inspectors with calibration responsibilities shall be able to generate periodic calibration recall reports to notify users of the gages to submit gages that are due for calibration.
- Inspectors performing Hardness testing shall be competent in calibrating the testers and performing proper surface preparation based on the Cameron procedures and/or ASTM methods.
- Shall maintain Eye examination requirements at all times.
- Inspector shall be able to handle heavy parts using overhead cranes and other lifting equipment safely.
- Shall maintain forklift driving qualification, if required.
- Shall be able to clearly communicate verbally and written.
- Inspectors shall be able to travel to supplier locations to perform dimensional and visual inspection based on the requirements and assignments.
- Shall be able to perform inspection at optimum cycle time with required precision.
- When given Receiving Inspection responsibility, Inspector shall work to eliminate backlog from QM lot.
- Shall be flexible to rotate from one inspection area to the other per Supervisory assignments.
- When part is determined scrap, Inspector shall be able to perform scrap transactions in the SAP system.
- Inspector shall be able to perform paint/coating thickness checks using paint thickness gages as well as able to perform NACE level I and II tests per requirements.
- Inspector shall effectively inspect sub-assemblies of the components and final assemblies as final inspection following a pre-defined inspection checklist.
- Inspector shall be able to communicate with third party inspectors required to review and/or witness inspector activities.
- Shall demonstrate professional attitude and work effectively with the other departments.
- Ensure compliance to all health, safety and environment policies.

Pay: RM3,000.00 - RM3,500.00 per month

**Benefits**:

- Health insurance
- Meal allowance
- Opportunities for promotion
- Professional development

Schedule:

- Day shift
- Fixed shift
- Night shift

Supplemental pay types:

- 13th month salary
- Overtime pay

Ability to commute/relocate:

- Gelang Patah: Reliably commute or planning to relocate before starting work (required)

Expected Start Date: 07/01/2023