Instrument Technician

Responsibilities: - Assist Instrument Superintendent in carrying out troubleshooting of equipment of repetitive failures. - Contact vendors for assistance in resolving difficult problem which require their specialized skills and knowledge Review the adequacy / availability of critical spare parts. - Plan, prepare and executive preventive maintenance...

**JOB DESCRIPTION**: - Inspects, test, adjusts, and repair instruments equipment systems that used to indicate, record, and control plants operation. - Tests accuracy of flowmeters, pressure gauges, temperature indicator, controllers, or detectors and other recording, indicating or controlling instruments to locate defective components in system using test...

Job description - Follow plant policies and repair procedures - Calibrate, troubleshoot, repair and replace process instruments as a part of the plant’s maintenance program - Maintain process instruments including valves, vibration monitors and other instruments - Perform required environmental compliance testing and documentation - Reduce cost of...

Job description - Follow plant policies and repair procedures - Calibrate, troubleshoot, repair and replace process instruments as a part of the plant’s maintenance program - Maintain process instruments including valves, vibration monitors and other instruments - Perform required environmental compliance testing and documentation - Reduce cost of...

**Main Duties and responsibilities**: - Able to read pneumatic ladder diagrams. - Able to read electrical and mech-electronic diagrams. - Able to service pneumatic valves relay, cylinders and valves. - Able to do calibration on flowrate, temperature, pressure/ vacuum and level instruments. - Understanding the terms of accuracy, precision and...

Job description - Follow plant policies and repair procedures - Calibrate, troubleshoot, repair and replace process instruments as a part of the plant’s maintenance program - Maintain process instruments including valves, vibration monitors and other instruments - Perform required environmental compliance testing and documentation - Reduce cost of...

Perform hands-on corrective and preventive maintenance for boiler, turbines, compressors, expanders, water treatment facilities, control valves, analyzers, gas detection system, updating instrument record documentation, flow/level/pressure/ temperature instrument, and troubleshooting all ESD system and instrumentation control - Perform all corrective and...

Carry out maintenance program and repairing work request - Carry out electrical installation, preventive and corrective maintenance. - Attend to Machine breakdown and troubleshoot - Perform daily maintenance, planned and unplanned job. - To supervise and monitor contractor's work in term of safety, work instruction and procedure. - Perform ad-hoc duties...

**Job Responsibilities: - ** - Responsible for doing all types of maintenance jobs related to electrical & instrumentation. - Able to do installation and modification of control circuit. - Able to do manual motor starter systems, VFD wiring, remote control unit (RCU) wiring, and programming. - Able to understand, design, and re-draw of electrical...

1. Maintain calibration records for related equipment according to ISO requirements. 2. Maintain historical records for all the Instruments/devices. 3. Prepare daily and monthly instrumentation reports. 4. Follow preventive maintenance schedules and troubleshoot breakdowns and initiate corrective measures at plant. 5. Identify all breakdowns, inspect and...

**Roles and Responsibilities**: 1. Equipment Efficiencies - To maintain the plant by performing planned preventative and predictive maintenance tasks and efficient response to plant breakdowns. 2. Should be able to do hands on work for lighting circuits troubleshooting, new electrical circuits installation. 3. Should be responsible for continuous...

**Overview**: Guan Chong Berhad is Asia’s largest cocoa processing company and our main factory is located at Pasir Gudang, Johor. Our company produce full range of cocoa products, namely Cocoa Liquor (Cocoa Mass), Cocoa Butter, Cocoa Cake and Cocoa Powder and the product are marketed under the “Favorich” brand which mean “High in Flavour" and "Rich...

Job description 1. To report to Shift Supervisor. 2. To read processing schedules, operating logs, test results of oil samples, and laboratory recommendations to determine changes in equipment controls required to produce specified quantity and quality of product. 3. To move and sets controls, such as knobs, valves, switches, levers, and index arms, on...

EcoOils was founded upon the principles of promoting environmental sustainability and viability through the recycling of palm oil industry residue. The emphasis on innovation and sustainability has resulted in the discovery and introduction of many value-added products into the market. EcoOils is the result of eco-friendly efforts via palm residue recycling...

Able to assist engineers to carry out works onboard vessels on various systems - mechanical, electrical, electronic, hydraulic, pneumatic and instrumentation. - Guidance and onsite training will be provided. - Willing to travel and work in shipyard & onboard vessel. - Those without qualification but with marine automation industry’s experience will be...

SUMMARY The Maintenance Worker plays a vital role in the upkeep and repair of equipment, machinery, and facilities within a chemical plant. This position involves performing maintenance tasks, conducting inspections, troubleshooting issues, and ensuring the smooth operation of plant assets. The Maintenance Worker collaborates with the production team,...

1. Able to read electrical drawing. 2.Able to do troubleshooting. 3. Able to do instrument calibration 4. Good team work **Job Type**: Contract Pay: RM2,000.00 - RM2,500.00 per month Schedule: - Monday to Friday Supplemental pay types: - Overtime pay

Role Overview: The Maintenance Worker plays a vital role in the upkeep and repair of equipment, machinery, and facilities within a chemical plant. This position involves performing maintenance tasks, conducting inspections, troubleshooting issues, and ensuring the smooth operation of plant assets. The Maintenance Worker collaborates with the production team,...

1. Able to read electrical drawing. 2.Able to do troubleshooting. 3. Able to do instrument calibration 4. Good team work **Job Type**: Contract **Salary**: RM2,000.00 - RM2,500.00 per month Schedule: - Monday to Friday Supplemental pay types: - Overtime pay Ability to Commute: - Pasir Gudang (required) Ability to Relocate: - Pasir Gudang:...

Able to assist engineers to carry out works onboard vessels on various systems - mechanical, electrical, electronic, hydraulic, pneumatic and instrumentation. - Open to **SKM or Diploma** students in mechanical/electrical/marine engineering only. - Kindly share the University Cover letter / please mention the starting and end date for internship. **Job...