Production Test Technician 2

2 weeks ago

Bayan Lepas, Malaysia Lam Research Full time

**Responsibilities**:
Production Test Tech 2s perform setup and testing/calibration of semiconductor Wafer Fabrication Equipment (WFE). They utilize a variety of tools, diagnostic equipment and computer-based testing instructions to ensure that equipment meets design specifications and customer requirements. This role will also prepare technical reports and summarize findings related to technical problems experienced while testing and troubleshooting circuits, components, instruments, and mechanical assemblies.
- Use hand tools, test equipment and fixtures to test Wafer Fabrication Equipment (WFE)
- Read and navigate electronic work instructions (Cell Fusion) and schematics
- Assist with audits through visual inspection and verifying checklists
- Measure/Record/ Test/ Troubleshoot temperature, pressure, voltage, resistance, continuity and other measurements using digital multimeters, IR guns and other test equipment
- Inspect parts for acceptance and correct or escalate as required
- Perform leak checks (vacuum, water lines, connections and components, pressure decay) by utilizing appropriate equipment (i.e. fixtures) and procedures (Cell Fusion and KM Matrix); verify check completed
- Indicate tasks are complete by utilizing I-marking, SQIP marks, and use of Swagelok go/no go gauges
- Understand implication of work, complete tasks in creative and effective ways, and make recommendations for solutions
- Install components/hardware by referring to drawings and Cell Fusion procedures utilizing correct hand tools, parts and fixtures; escalate non-conforming parts and procedures as needed
- Resolve source inspection findings by troubleshooting/performing rework. Identify issues and improvements
- Understand/ Report/ Document/ Review tool status and find tool information by utilizing various SAP commands, set up specialized equipment by gathering required fixtures, and use the proper escalation path
- Close assigned tasks by verifying completion of testing operations
- including Cell Fusion work instruction, signing off and providing thorough descriptions of what was done
- Create detailed MFG tasks covering skipped steps, document abnormal conditions and tool reminder (TUA)

**Other Job Responsibilities**

Safety Protocol:

- Complete all required safety training
- Follow safe work practices by lifting no more than 35 pounds, using ergonomic pads, stretching when needed, etc.
- Adhere to personal/ and product safety guidelines by:

- utilizing appropriate PPE following clean room procedures
- following Lockout Tagout policies and procedures (LOTO and ZEST)
- utilizing fixtures (lift hoists, lift track, gantry cranes, lifting tool) to aid in the assembly of tools
- Perform Risk Management by Walking Around (RMBWA) inspections and document, correct and/or escalate safety issues/hazards to appropriate individuals/departments

Communication:

- Effective written and verbal communication skills in English
- Develop constructive and cooperative working relationships with others through telephone, or in written form
- Timely communicate verbally and in writing to appropriate managers/ individuals/ groups/locations to:

- ensure workflow and keep to the production schedule.
- identify production issues.
- suggest continuous improvements.
- give system status during shift pass downs.
- Actively participate in meetings and training
- Consistently exhibit behaviors that align with Lam’s core values
- Work as part of a cohesive team to ensure that workflow and production schedules are maintained
- suggest continuous improvements.
- give system status during shift pass downs.

**Minimum Qualifications**
- Associates degree in electronics or related field required and/or equivalent military experience that includes electronics, such as avionics technician
- 1-2 years of semiconductor capital equipment industry
- Work 12-plus hour shifts in fast paced and time-sensitive environment
- Squat, kneel, walk, climb, stand and operate in ergonomically
- challenging positions for over 50% of time
- Lift 35 pounds
- Perform repetitive motions using hands and various hand tools
- Distinguish between colors for wire identification
- Maintain a clean and organized workspace
- Flexible and responsive to changing priorities (e.g. rework, overtime and limited travel to other Lam/customer facilities, etc.)

**Our Commitment**

We believe it is important for every person to feel valued, included, and empowered to achieve their full potential. By bringing unique individuals and viewpoints together, we achieve extraordinary results.
- All qualified applicants will receive consideration for employment without regard to race, sex, color, religion, sexual orientation, gender identity, national origin, protected veteran status, or on the basis of disability._

**We Look Forward to Your Application

  • Test Technician

    4 days ago

    Bayan Lepas, Malaysia Lifework Staffing Services Full time

    **Test Technician** **Education: Minimum certificate or diploma level** **Offer Salary: RM1,500 and above (minimum 1 year of relevant working experience)** **Working Hour**: **Shift work: 8:00am - 5:00pm (Normal pattern)** - Need to have electronics skills, experience in soldering, programming of boards, software testing and experience with SAP system...

  • Technician, Test

    7 months ago

    Bayan Lepas, Malaysia Venture Electronics Services (Malaysia) Sdn Bhd Full time

    **Job Summary** - Responsible for managing a group of technicians to perform periodic preventive maintenance on test equipment. - Trouble shoot, repair defective test equipment and set up of new test station. Overall in charge on FPT/ICT/FCT/General Tester maintenance. - To help solve test and rework issues as requested by customer(internal or external). -...

  • Production Technician

    6 days ago

    Bayan Lepas, Malaysia 1 Millennium International Full time

    **PRODUCTION TECHNICIAN - NATIONAL INSTRUMENTS, BAYAN LEPAS** **Job Focus** - Ensuring the required materials are available for production, and that the factory is safe for all workers. - Evaluate products to ensure quality and functionality - Inspecting and testing products before they are made available to the public - Follows basic rules, practices &...

  • Test Product Technician

    2 weeks ago

    Bayan Lepas, Malaysia Mnosys Sdn Bhd Full time

    Job Overview : To support the line and engineering activities assigned. Primary Responsibilities : 1. Troubleshoot handler/tester/product related issues 2. Assist engineers to conduct engineering activities 3. Send reports to customer for lot disposition 4. Perform test program & test hardware checkout 5. Analyze & provide immediate disposition for product...

  • Test/debug Technician

    6 months ago

    Bayan Lepas, Malaysia P & P HIKMAH Full time

    **Job description**: Technician for established OEM & MNC at Bayan Lepas, Penang. **Responsibilities**: Responsible for performing a variety of technical support duties in one or more manufacturing areas. Duties may be related to installation, maintenance, repair and support of manufacturing equipment, technical support of one or more production, product...

  • Test/debug Technician

    7 months ago

    Bayan Lepas, Malaysia P & P HIKMAH Full time

    **Job description**: Technician for established OEM & MNC at Bayan Lepas, Penang. **Responsibilities**: Responsible for performing a variety of technical support duties in one or more manufacturing areas. Duties may be related to installation, maintenance, repair and support of manufacturing equipment, technical support of one or more production, product...

  • Test Technician

    2 weeks ago

    Bayan Lepas, Malaysia 1 Millennium International Full time

    **Summary** Looking for **entry/fresh graduate** test technician with excellent problem solving skills, promising work attitude as well as willingness to learn new knowledge to support operation need, maintenance, calibration as well as supporting engineering related activities. Fresh graduates with good results/ junior experience are also encouraged to...

  • Production Test Technician

    3 days ago

    Bayan Lepas, Malaysia allstaff.com.my Full time

    Bayan Lepas, Penang MYR 1800-2500 **Qualifications**: equivalent **Requirements**: - At least 1 year related working experience in the electronics industry - Willing to work extra hours to meet the production schedule - Able to interpret schematic drawings and understand assembly instructions - Able to troubleshoot and repair functional failure board...

  • Test Technician Fresh Graduate

    2 weeks ago

    Bayan Lepas, Malaysia 1Millennium International Sdn Bhd Full time

    Looking for an **entry/fresh graduate** test technician with excellent problem-solving skills, a promising work attitude as well a willingness to learn new knowledge to support operation needs, maintenance, calibration as well as supporting engineering-related activities. Fresh graduates with good results/ junior experience are also encouraged to...

  • Technician 2, Test Equipment Maintenance

    1 week ago

    Bayan Lepas, Malaysia Western Digital Full time

    Company Description At Western Digital, our vision is to power global innovation and push the boundaries of technology to make what you thought was once impossible, possible. At our core, Western Digital is a company of problem solvers. People achieve extraordinary things given the right technology. For decades, we’ve been doing just that. Our technology...

  • Technician

    7 months ago

    Bayan Lepas, Malaysia Winway Interconnect Technology (M) Sdn.Bhd. Full time

    Provide technical support in FA production. - Responsible for testing the electrical functions of the cabinet - Implementing changes in testing protocols as required. - Reporting any issues through the appropriate channels. - Assist engineers to process drawings, BOM and other information in the project. - 2 years experience as a production test technician,...

  • Test Technician

    2 weeks ago

    Bayan Lepas, Malaysia VENTURE ELECTRONICS SERVICES (M) SB Full time

    RESPONSIBILITIES - Troubleshoot PCA and provide failure analysis data to support yield improvement and evaluation run. - Generate debug flow, documentation and daily reports. - Control and clear debug WIP to achieve set target. - Work closely with other group in resolving quality issues. - Carry out product evaluations and generate report to Engineer - To...

  • Test Equipment Maintenance Technician 1

    7 months ago

    Bayan Lepas, Malaysia Sanmina Corporation Full time

    Test Equipment Maintenance Technician 1 **Responsibilities**: - Responsible for production tester troubleshooting and repair to ensure minimum downtime. - To ensure all tester are running in good condition. - Operation and maintenance of all tester equipment - Looks for opportunities to improve work productivity and efficiency - Using computer and computer...

  • Pc Technician

    7 months ago

    Bayan Lepas, Malaysia HF Technology (Penang) Sdn Bhd Full time

    Computer hardware engineering technicians collaborate with computer hardware engineers in the development of computer hardware, such as motherboards, routers, and microprocessors. Computer hardware engineering technicians are responsible for building, testing, monitoring, and maintaining the developed computer technology. SPM / O Level / SKM Level 1 / SKM...

  • Manufacturing Technician

    7 months ago

    Bayan Lepas, Malaysia Li Ann Empowerment Full time

    **Manufacturing Technician (Such as Test/Troubleshooting Technician, Soldering Technician, Debug Technician)** Working Patterns: 4 days of work, 3 days of rest. (12 hours) 3 days of work, 4 days of rest. Any experience in Testing RF Products/Soldering/Scope or Hands-on experiences in calibration, test, and repair will be an advantage! **FRESH GRADUATES...

  • Manufacturing Technician

    2 weeks ago

    Bayan Lepas, Malaysia Allstaff sdn bhd Full time

    Qualifications: Other Requirements: Job Descriptions: - Manufacturing Assembly and Test Technician for System Manufacturing. - Integration and troubleshoot products to ensure quality and functionality. - Set up and operate production equipment in accordance with current good manufacturing practices and standard operating procedures. - Assist engineers in...

  • Manufacturing Technician

    7 months ago

    Bayan Lepas, Malaysia Li Ann Empowerment Full time

    **Manufacturing Technician (Such as Test/Troubleshooting Technician, Soldering Technician, Debug Technician)** Working Patterns: 4 days of work, 3 days of rest. (12 hours) 3 days of work, 4 days of rest. Any experience in Testing RF Products/Soldering/Scope or Hands-on experiences in calibration, test, and repair will be an advantage! **FRESH GRADUATES...

  • Operator (Assembly/pre-test)

    7 months ago

    Bayan Lepas, Malaysia P & P HIKMAH Full time

    **URGENTLY HIRING** Manufacturing Operator for established OEM & MNC at Bayan Lepas, Penang. **Responsibilities**: - Performing routine manufacturing processes - Performing data entry requirements at each operation. - Assisting the Technician and Senior Technician in production - Performing necessary pre-operation activities to ensure proper equipment...

  • Technician(Solder/test/debug/facilities/production)

    2 weeks ago

    Bayan Lepas, Malaysia P & P HIKMAH Full time

    Job Description: - Machinery & Equipment: Support multi-discipline manufacturing processes with respect to the repair, maintenance, installation and/or enhancement of a select group of machinery and equipment or interrelated systems. - Process/Product/Production: Provides technical support in the area of electronic or mechanical operations, tests,...

  • Test Technician

    6 days ago

    Bayan Lepas, Malaysia PLEXUS MANUFACTURING SDN. BHD. Full time

    Responsible for operating production test equipment, troubleshoot and repair defective products, maintain test equipment, monitor test performance and yield information, and provide technical support to other focus factory personnel. - Assembly/system level troubleshooting to component level - Field board debugging and analyzing failure boards. - Debug WIP...