Technician

5 months ago

Kulim, Malaysia Kinetics Systems Malaysia Sdn Bhd Full time

**KINETICS SYSTEMS MALAYSIA SDN BHD (494465-U)**
- Kinetics is a dynamic global company with dedicated employees in Malaysia, Singapore, China, India, Middle East, Europe and North America region. With over 35 years of experience providing process and mechanical solutions for customers in the microelectronics, solar, biopharm and other technology-focused markets, now we are inviting talents to join us as we pursue our vision to be the leading company.

**I.** **DAILY TASK**
- The primary responsibility of a TCGM Technician is to perform daily routine work like cylinder/drums/IBC change and receiving, round and readings, for liquid bulk, specialty gas and chemicals delivery equipment such as gas cabinets, chemical dispense module, purifiers, bulk tanks, analyzers, valve manifold boxes and chemical manifold boxes. Understand how the equipment works, identify individual components included in each assembly and perform basic periodic maintenance and monitor sufficient gas inventories and report out any abnormalities. TCGM Technician is responsible in day-to-day shift operation with minimum supervision and work with superior in any plan set up for the shift.

**II.** **RESPONSIBILITIES**
- Maintain and operate liquid bulk, specialty gas and chemical delivery equipment.
- Perform advanced gas and chemical troubleshooting and repair of delivery equipment.
- Perform daily rounds including recording readings, completing safety inspections, monitoring online gas & chemical systems and gas cylinder & chemical drums/IBCs change-outs.
- Verify that daily rounds are recorded. Determine corrective action to be taken in the event of abnormal parameters and ensure that corrective action is completed.
- Monitor and understand correct liquid bulk delivery procedures for each product on site.
- Perform bulk gas and tube trailer offload.
- Oversee the installation, facilitation, and start-up of all high purity gas delivery equipment.
- Ensure that an accurate and complete gas & chemical inventory is maintained. Evaluate trends in monthly gas & chemical usage.
- Provide information for and initiate proper reporting procedures per on-site policies including, but not limited to: Quality Incident Reports, product acceptance, tank fill, inventory and material usage, bulk gas analysis, analyser calibration, monitoring, safety parameters, and personnel requirements.
- Assist in the identification and resolution of gas & chemical -related manufacturing problems.
- Act as Emergency Response Team member/leader
- Act as primary customer shift interface
- Restart all high purity gas delivery equipment.
- Participate in customer and Kinetics System Malaysia programs including, but not limited to: Safety, Training, Operations, and Preventive Maintenance
- Develop and maintain applicable site-specific work instructions.
- Generate site-specific reports and consolidate data as requested by Management.
- Complete assigned tasks per existing procedures
- Perform minor analytical procedures and/or sampling procedures.
- Accountable for the safety of all persons and surrounding facilities.
- Any other task assigned by Management.

**III.** **QUALIFICATIONS**

Posses’ minimum a Certificate/Diploma in Engineering/Others.

Must maintain strict confidentiality in performing the duties of the TCGM Technician also demonstrate the following personal attributes.
- Be honest and trustworthy
- Be respectful
- Be flexible
- Team player
- Willing to travel
- Hard working
- Demonstrate sound work ethics

Working hours: Shift Pattern (Day & Night)

One (1) day rest in every 7 days. Not exceed 60 hours per week including Over Time.

Entitle for OT Rate 1.5 (Normal Working Day & Off Day)/ 2.0 (Public Holiday & Rest Day) / 3.0 (Rest Day on PH)

Contribution of EPF, Socso & EIS. Annual Leave, Sick Leaves and Other Special Leaves under company.

Employee is protected under Group Hospitalization, Group Term Life, Group Personal Accidents & Business Travel Insurance (when required).
- **SALARY RANGE IS BASED ON EXPERIENCE.**_

**Job Types**: Full-time, Permanent, Fresh graduate

**Salary**: RM1,800.00 - RM3,000.00 per month

**Benefits**:

- Health insurance
- Maternity leave
- Opportunities for promotion
- Parental leave

Schedule:

- Day shift
- Night shift
- Rotational shift

Supplemental pay types:

- Overtime pay
- Yearly bonus

  • Technician

    5 months ago

    Kulim, Malaysia Reality AI Full time

    **Title**:TECHNICIAN **Requisition ID**:53062**Department**:RSK MANUFACTURING & ENGINEERING**Location**:Kulim, MY**Job Function**:Manufacturing Operations- Assembly machine (Wire bonder. Die bonder) repairing and maintanance.

  • Service Technician

    6 months ago

    Kulim, Malaysia Kingfisher Recruitment (Malaysia) Sdn.Bhd Full time

    A leading semiconductor-based company is recruiting for a Service Technician to join their team. You will be the technician responsible in providing service engineering duties on assigned tasks. This position requires someone hardworking, disciplined and good hands-on experience. **Responsibilities**: - Perform / give instruction on abatement system...

  • Manufacturing Technician

    6 months ago

    Kulim, Malaysia INTEL Full time

    Manufacturing Technicians perform functions associated with all wafer production including operations, equipments, process and training. Collects and evaluates operating data to conduct online equipment adjustment and ensure process optimization. Responsible for running lots in a qualitative way. Also, responsible for preventive maintenance, troubleshooting,...

  • Manufacturing Technician

    5 months ago

    Kulim, Malaysia INTEL Full time

    Manufacturing Technicians perform functions associated with all wafer production including operations, equipment's, process and training.Collects and evaluates operating data to conduct online equipment adjustment and ensure process optimization.Responsible for running lots in a qualitative way. Also, responsible for preventive maintenance, troubleshooting,...

  • Manufacturing Technician

    5 months ago

    Kulim, Malaysia INTEL Full time

    Manufacturing Technicians perform functions associated with all wafer production including operations, equipments, process and training. Collects and evaluates operating data to conduct online equipment adjustment and ensure process optimization. Responsible for running lots in a qualitative way. Also, responsible for preventive maintenance, troubleshooting,...

  • Technician

    6 months ago

    Kulim, Malaysia Kinetics Systems Malaysia Sdn Bhd Full time

    **KINETICS SYSTEMS MALAYSIA SDN BHD (494465-U)** - Kinetics is a dynamic global company with dedicated employees in Malaysia, Singapore, China, India, Middle East, Europe and North America region. With over 35 years of experience providing process and mechanical solutions for customers in the microelectronics, solar, biopharm and other technology-focused...

  • Mechanical Technicians

    5 months ago

    Kulim, Malaysia Multilevel Technologies Sdn Bhd Full time

    **MECHANICAL TECHNICIANS** - Must be willing work hard and on shift - Must have at least minimum certificate / diploma in Mechanical Engineering Please contact: Haji Ahmad (019-480 9990) **Job Types**: Full-time, Permanent, Fresh graduate **Salary**: RM1,873.54 - RM3,332.02 per month **Benefits**: - Opportunities for promotion - Parental leave -...

  • Facility Technician

    6 months ago

    Kulim, Malaysia AT&S Full time

    **Be part of our team!**: **Facility Technician (CRM)**: **Your Responsibilities**: - To ensure smooth operation and maintenance of facility equipment and process running with minimum problem - Perform hands-on routine and preventive maintenance work of as per schedule. - To perform / supervise the preventive maintenance works and breakdown repairs carried...

  • Technician Maintenance

    6 months ago

    Kulim, Malaysia Infineon Technologies Full time

    Perform routine Preventive Maintenance (PM) In your new role you will: - Perform routine Preventive Maintenance (PM) - Perform standard calibration on the PM equipment. - Fill up PM documentation as required (ex-checklist, TECO) Parts or consumables preparation for PM Carry out routine check and recording on the tool parameters. - Perform consumable/medium...

  • Staff Technician Maintenance

    6 months ago

    Kulim, Malaysia Infineon Technologies Full time

    As a maintenance technician, you will play a crucial role in monitoring your tool maintenance and related processes. You will supervise and implement preventive actions and analyze their efficiency. Your practical attitude will definitely be your ally in implementing the suitable solutions you come up with. In your new role you will: In your new role you...

  • Technician, Process

    5 months ago

    Kulim, Malaysia Entegris Full time

    Job Title: Technician, Process **Job Description**: - The Role: Technician, Process- Provides technical support to engineers to ensure production goals of the organization are met.- - Provides assistance related to the review of existing and design of new manufacturing equipment & processes.- - May suggest or implement equipment purchases, modifications or...

  • Technician, Process

    5 months ago

    Kulim, Malaysia Entegris Full time

    Job Title: Technician, Process **Job Description**: - The Role: Technician, Process- - Provides technical support to engineers to ensure production goals of the organization are met. - Provides assistance related to the review of existing and design of new manufacturing equipment & processes. - May suggest or implement equipment purchases, modifications or...

  • Technician, Quality

    5 months ago

    Kulim, Malaysia Entegris Full time

    Job Title: Technician, Quality **Job Description**: Position Purpose & Summary: Quality Assurance Technician Maintaining various QA measuring equipment to ensure production meets all the quality and customer’s requirements. Primary Duties & Responsibilities: 1. Able to perform measurement using equipment like Smartscope, CMM, Melt Flow indexer, Optical...

  • Technician, Process

    5 months ago

    Kulim, Malaysia Entegris Full time

    Job Title: Technician, Process **Job Description**: The Role: Technician, Process- Provides technical support to engineers to ensure production goals of the organization are met.- Provides assistance related to the review of existing and design of new manufacturing equipment & processes.- May suggest or implement equipment purchases, modifications or...

  • Staff Technician Maintenance

    5 months ago

    Kulim, Malaysia Infineon Technologies Full time

    Perform routine Preventive Maintenance (PM) for multiple functional area In your new role you will: - Perform routine Preventive Maintenance (PM) for multiple functional area - Perform standard calibration on the PM equipment - Fill up PM documentation as required (eg e-checklist, TECO) - Parts or consumables preparation for PM - Carry out routine check...

  • Hvac Facilities Technician

    5 months ago

    Kulim, Malaysia MST Facilities Sdn Bhd Full time

    **Responsibilities**: - Carry out operations, maintenance & repair for Air Conditioning & Mechanical systems. - To immediately attend, rectify and escalate any breakdown and failure of system or equipment to ensure zero interruption to production. - To perform routine rounding on all systems and equipment. To perform a visual inspection and data...

  • Hvac Facilities Technician

    6 months ago

    Kulim, Malaysia MST Facilities Sdn Bhd Full time

    **Responsibilities**: - Carry out operations, maintenance & repair for Air Conditioning & Mechanical systems. - To immediately attend, rectify and escalate any breakdown and failure of system or equipment to ensure zero interruption to production. - To perform routine rounding on all systems and equipment. To perform a visual inspection and data...

  • Technician, Maintenance

    5 months ago

    Kulim, Malaysia Entegris Full time

    Job Title: Technician, Maintenance **Job Description**: The Role: Provide support to production equipment, ensuring equipment is maintained, operate & repaired in effective/efficient manner to achieve production output always. In this role you will: - Maintain equipment In effective manner for all production equipment- Maintain adequate supply of spare...

  • Staff Technician Maintenance

    5 months ago

    Kulim, Malaysia Infineon Technologies Full time

    I n your new role you will: A - s a maintenance technician, you will play a crucial role in monitoring your tool maintenance and related processes. You will supervise and implement preventive actions and analyze their efficiency. Your practical attitude will definitely be your ally in implementing the suitable solutions you come up with. S - et, define and...

  • Technician, Setup

    5 months ago

    Kulim, Malaysia Entegris Full time

    Job Title: Technician, Setup **Job Description**: - The Role: - The core purpose is the mission of the job - why it needs to be filled and how it fits into the organization. By narrowly defining the Core Purpose, you’re able to define what’s needed to solve the existing business challenge(s)- Refer to JD attachedIn this role you will: - What are the...