CNC Programmer Milling Machinist

2 weeks ago

Shah Alam, Malaysia MICRON CONCEPT AEROSTURCTURES SDN BHD Full time

Responsibilities - Performs a variety of routine and project support activities in the field service function on manual milling machines, CNC milling machines, CNC turning, 5-Axis Double Column Mill machines, Vertical Lathe, Horizontal Milling machines, saws, grinding and metrology equipment. - Technically knowledgeable in troubleshooting various drive systems and CNC programming of maker SIEMENS, FANUC, etc - Responsible for master planning in installing, commissioning and testing new/ used machines from start to handover to production - Schedule, plan and perform periodic maintenance activities, troubleshoot, and repair routine technical, mechanical, and electrical equipment failures in the field. - Assesses and responds to situations using standard procedures in isolation and fixing problem machines. Reports design, reliability, and maintenance problems through field service management software. - Operate and understand all machine controls and functions before machine hand-over to the production operator entirely;
- Responsible for machine adjustments to ensure products are manufactured to required specs;
- Periodic inspection and replacement of tooling;
- Responsible for all in-process quality checks and other job/ service/maintenance-related paperwork according to ISO 9001:2015 and AS9001 - Monitor cycle times and tooling and work with production and management to strive for continuous improvement;
- Maintains knowledge of tooling and fixtures used in CNC machining - Completion of all required reporting of service work performed, time sheets, and other reports as set forth by the Field Service Manager. - Ensuring spare parts stock levels are kept at specified levels and maintained in a presentable, good condition. - Provide training for local staff and interns on machine setup - including program machine, tooling replacement, and machine maintenance/service. Assist junior machinists with OJT status to ensure product quality and machining safety. - Function as a facility manager to upkeep all equipment and supplies continuity at all times - Provide decisive decision-making to management on new/ used machine suitability for production
Micron Concept is an innovative company. We started out specialized in jig and fixture. However, over the years, we have diversified into both oil and gas and aerospace industry.Micron Concept Aerostructures (M.C.Aero) primarily focuses in the aerospace industry. With our excellent quality, we are committed in serving our customers' needs and we strive to provide a great working environment for all our employees. Thus, Micron Concept's 130,000 square foot facility is apt as it enables us to meet the growing needs of our customers.
Diploma / Advanced Diploma / Higher Graduate Diploma / DVM / DKM Level 4 / DLKM Level 5

  • CNC Programmer Milling Machinist

    2 weeks ago

    Shah Alam, Selangor, Malaysia MICRON CONCEPT AEROSTURCTURES SDN BHD Full time

    Responsibilities - Performs a variety of routine and project support activities in the field service function on manual milling machines, CNC milling machines, CNC turning, 5-Axis Double Column Mill machines, Vertical Lathe, Horizontal Milling machines, saws, grinding and metrology equipment. - Technically knowledgeable in troubleshooting various drive...

  • CNC Programmer Milling Machinist

    3 weeks ago

    Shah Alam, Malaysia CURGE ADVANCE SDN BHD Full time

    . Responsible in handling the CNC Programmer section. 2. Ensure that all CNC machines operate on the correct program and selection of cutting tools. 3. Maintain specifications by observing drilling, grooving, cutting and milling. 4. Connect the CAM program created and run on the CNC machine. 5. Program modifications must be made using the control panel on...

  • CNC Milling Machinist

    4 weeks ago

    Shah Alam, Malaysia Micron Concept Aerostructure Sdn Bhd Full time

    **Position Summary**: The CNC Milling Machinist is responsible for setting up, operating, and maintaining CNC milling machines to produce precision parts according to specifications. This role involves interpreting blueprints, programming machine tools, and monitoring machine performance to ensure quality and efficiency. - Involved in product realization...

  • CNC Programmer Milling Machinist

    2 weeks ago

    Shah Alam, Selangor, Malaysia CURGE ADVANCE SDN BHD Full time

    Responsible in handling the CNC Programmer section. 2. Ensure that all CNC machines operate on the correct program and selection of cutting tools. 3. Maintain specifications by observing drilling, grooving, cutting and milling. 4. Connect the CAM program created and run on the CNC machine. 5. Program modifications must be made using the control panel on the...

  • CNC Machinist

    2 weeks ago

    Shah Alam, Malaysia Talent Houz Consulting & Services Full time

    **Position: CNC Machinist** **Industry: Manufacturing** **Location: Bukit Rambai, Melaka** **Salary: RM3,000 above** **About the Job** **Responsibilities**: - Oversee daily production to meet or exceed targets. - Create and manage monthly work schedules, ensuring staff are disciplined and productive. - Work with the R & D Department on new product...

  • Machinist

    3 weeks ago

    Shah Alam, Malaysia Curge Advance Sdn Bhd Full time

    **Position : CNC Machinist** **Location: Shah Alam, Selangor** Competency: - Experience in programme and operate CNC Milling / Lathe / Turning - Able to interpret geometrical drawings and dimension tolerances - Able to machine different material such as metal, aluminium, engineering plastics and etc. - Knowledge of prgrams, macros, CAM software and GD&T -...

  • CNC Milling Skilled Machinist

    2 months ago

    Shah Alam, Malaysia VALIANT ADVANCE TECHNOLOGY SDN BHD, 26 Jalan Tabla 3321, Seksyen 33, Shah Alam Full time

    **Responsibilities** - Sediakan dan kendalikan mesin CNC Milling - Bertanggungjawab dan menyediakan pengeluaran harian mengikut jadual pengeluaran - Mematuhi kualiti, pengemasan dan keselamatan yang baik - Menyediakan laporan pengeluaran harian **Requirements**: - Sekurang-kurangnya 3 tahun pengalaman - Dapat membaca dan mentafsir lukisan kejuruteraan -...

  • CNC Milling Skilled Machinist

    21 hours ago

    Shah Alam, Malaysia VALIANT ADVANCE TECHNOLOGY SDN BHD, 26 Jalan Tabla 3321, Seksyen 33, Shah Alam Full time

    **Responsibilities** - Sediakan dan kendalikan mesin CNC Milling - Bertanggungjawab dan menyediakan pengeluaran harian mengikut jadual pengeluaran - Mematuhi kualiti, pengemasan dan keselamatan yang baik - Menyediakan laporan pengeluaran harian **Requirements**: - Sekurang-kurangnya 3 tahun pengalaman - Dapat membaca dan mentafsir lukisan kejuruteraan -...

  • CNC Milling Skilled Machinist

    2 weeks ago

    Shah Alam, Selangor, Malaysia VALIANT ADVANCE TECHNOLOGY SDN BHD, 26 Jalan Tabla 3321, Seksyen 33, Shah Alam Full time

    **Responsibilities**- Sediakan dan kendalikan mesin CNC Milling- Bertanggungjawab dan menyediakan pengeluaran harian mengikut jadual pengeluaran- Mematuhi kualiti, pengemasan dan keselamatan yang baik- Menyediakan laporan pengeluaran harian**Requirements**:- Sekurang-kurangnya 3 tahun pengalaman- Dapat membaca dan mentafsir lukisan kejuruteraan- Boleh...

  • Machinist

    2 weeks ago

    Shah Alam, Malaysia PROSEAL SOLUTIONS SDN BHD Full time

    Responsible to follow basic blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions or procedures to accurately assemble equipment and products. - Feedback any abnormality appeared during the set up to the Production supervisor. - Offer trouble shooting and brainstorming in the production problem. -...

  • CNC Milling Technician

    1 week ago

    Shah Alam, Malaysia XTROTECH SDN BHD Full time

    Operate CNC Milling Machine. Can understand and read mechanical drawings. 5 day work week. Accommodation can be provided. We are an established Automation Company, engaging in design and manufacturing of machinery, and providing customised solution for the factory automation and production system. PMR / PT3 or Equivalent

  • CNC Milling Technician

    2 weeks ago

    Shah Alam, Selangor, Malaysia XTROTECH SDN BHD Full time

    Operate CNC Milling Machine. Can understand and read mechanical drawings. 5 day work week. Accommodation can be provided.We are an established Automation Company, engaging in design and manufacturing of machinery, and providing customised solution for the factory automation and production system.PMR / PT3 or Equivalent

  • CNC Milling

    4 weeks ago

    Shah Alam, Malaysia Micron Concept Aerostructure Sdn Bhd Full time

    To study and improve the machine setup time from time to time to reduce the total machine hours. - Provide guidance and able to train the Machinist - Setter on machining knowledge and skills. - Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling, and thread chasing operations; taking measurements;...

  • CNC Milling

    3 weeks ago

    Shah Alam, Malaysia Micron Concept Aerostructure Sdn Bhd Full time

    To study and improve the machine setup time from time to time to reduce the total machine hours. - Provide guidance and able to train the Machinist - Setter on machining knowledge and skills. - Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling, and thread chasing operations; taking measurements;...

  • CNC Milling Machinist

    2 weeks ago

    Shah Alam, Malaysia Micron Concept Aerostructure Sdn Bhd Full time

    Involved in product realization process by carrying out certified activities which comply to internally defined configuration, process, and requirement. - Perform quality check throughout the product realization process to ensure product/ process quality control. - Perform duties assigned by departmental lead and support overtime whenever requested to meet...

  • Programmer

    3 weeks ago

    Shah Alam, Malaysia Curge Advance Sdn Bhd Full time

    **Job Description & Requirements** **Position : CNC Programmer & Setter** **Competency**: - Experience in programming & setting of 5 Axis CNC machines with MasterCam for aerospace parts - Able to interpret drawings with geometrical dimensioning & tolerancing (GD&T). - Knowledge of programs, macros, CAD & CAM (i.e. Catia & Solidworks) software - Setting &...

  • Programmer

    2 weeks ago

    Shah Alam, Malaysia Curge Advance Sdn Bhd Full time

    **Job Description & Requirements** **Position : CNC Programmer & Setter** **Competency**: - Experience in programming & setting of 5 Axis CNC machines with MasterCam for aerospace parts - Able to interpret drawings with geometrical dimensioning & tolerancing (GD&T). - Knowledge of programs, macros, CAD & CAM (i.e. Catia & Solidworks) software - Setting &...

  • CNC Milling Machinist

    2 weeks ago

    Shah Alam, Selangor, Malaysia Micron Concept Aerostructure Sdn Bhd Full time

    Involved in product realization process by carrying out certified activities which comply to internally defined configuration, process, and requirement. Perform quality check throughout the product realization process to ensure product/ process quality control. Perform duties assigned by departmental lead and support overtime whenever requested to meet...

  • CNC Machinist

    2 weeks ago

    Shah Alam, Malaysia CURGE ADVANCE SDN BHD Full time

    Responsible in operating CNC Machine parts. 2. Ensure that all CNC machines operate on the correct program and selection of cutting tools. 3. Maintain specifications by observing drilling, grooving, cutting. 4. Connect the CAM program created and run on the CNC machine. 5. Program modifications must be made using the control panel on the machine. 6. Make...

  • CNC Machinist

    2 weeks ago

    Shah Alam, Selangor, Malaysia CURGE ADVANCE SDN BHD Full time

    Responsible in operating CNC Machine parts. 2. Ensure that all CNC machines operate on the correct program and selection of cutting tools. 3. Maintain specifications by observing drilling, grooving, cutting. 4. Connect the CAM program created and run on the CNC machine. 5. Program modifications must be made using the control panel on the machine. 6.Make...