Molding Technician

6 days ago

Ulu Tiram, Malaysia Meiban Technologies (Malaysia) Sdn Bhd Full time

We are looking for several Molding Technician to support in the preparing of materials and perform mold/process setup in the manufacturing of plastic components and sub-assembly to ensure output volume, product quality and shipment commitments meet targeted levels.

**Responsibilities:

- **
- Prepare the materials according to production plan.
- For Production - verify correct material is used as per BOM and physically check the material bag descriptions tally with BOM before the Material Handler loads the material into hopper. Check the recording of material record is accurate and complete.
- For Mold Test - verify correct material is used as per Mold Test Form and physically check the material bag descriptions with Mold Test Form before the Material Handler loads he material into the hopper.
- Maintain equipment and plant in a good condition.
- Perform process setup to produce products that meet quality and output standards.
- Ensure QC inspectors check products prior to production start-up.
- Jointly deploy the operators to the respective task at start of shift. Redeploy during production when needed to ensure optimal utilisation of resources and machines.
- Train the operators in products and machine operation so that they can carry out their job function independently and competently.
- Attend to resolve process and machine problems that are feedback by operators and QC Inspectors.
- Raise any problem that cannot be resolved to the Engineer for review and follow-up actions.
- Assist the Engineer in implementing all corrective and preventive actions for all discrepancies and potential problems to ensure problems are contained, corrected and prevented from recurring.
- Perform mold qualifications and first article submissions as planned to meet customers' requirements.
- Assist Engineer in liasing with planner to ensure prompt delivery of products to customers.
- Assist the Engineer to qualify new materials and processes.
- Control further processing, delivery or installation of nonconforming product until the deficiency or unsatisfactory condition has been corrected.
- Perform any other tasks as assigned by superior from time to time.
- **Night shift technicians are given the authority to stop the machine when there is a quality issue.**

**Requirements:

- **
- Cert / Diploma in Injection Molding / Mechanical or equivalent.
- Possess 3 to 5 years of relevant experience in Injection Molding industry.
- Hand on in mold setup and molding process troubleshooting.
- Able to perform night shift when required.
- Experienced with LSR production.

**Job Types**: Full-time, Permanent

Pay: RM2,000.00 - RM3,200.00 per month

**Benefits**:

- Free parking
- Health insurance
- Opportunities for promotion
- Parental leave
- Professional development

Schedule:

- Day shift
- Night shift

Supplemental Pay:

- 13th month salary
- Attendance bonus
- Overtime pay
- Performance bonus

**Education**:

- Malaysian Special Skills Certificate (preferred)

**Experience**:

- Injection Molding: 3 years (preferred)

  • Mold Maintenance Assistant

    1 week ago

    Ulu Tiram, Malaysia JOBBUILDER Full time

    A mold maintenance technician is a manufacturing worker who performs maintenance on molds and machines used for injection molding or casting of plastics and other materials. - In this career, your responsibilities are to clean and maintain molds and equipment, perform inspections on mold components, and repair any damages to the mold or machinery. - Your...

  • Injection Molding Technician

    1 week ago

    Ulu Tiram, Malaysia BRANDPLUS PRECISION PLASTIC SDN BHD Full time

    responsible for setting up, operating, and maintaining injection molding machines to produce high-quality parts. troubleshoot and resolve issues related to the molding process, conduct quality checks, and ensure that production runs efficiently while meeting all safety and quality standards. **Key Responsibilities**: - Set up and operate injection molding...

  • Tooling Technician

    6 days ago

    Ulu Tiram, Malaysia Meiban Technologies (Malaysia) Sdn Bhd Full time

    We are looking for several Tooling Technician to perform production molds, jig and fixtures maintenance in order to ensure that the molding machine is always running in good condition. **Responsibilities: - ** - Service and maintain production molds and/or jig & fixtures to be in good working condition. - Work with Senior Mold Maintenance Engineer and...

  • Mold Maintenance Technician

    6 days ago

    Ulu Tiram, Malaysia JOBBUILDER Full time

    Familiar with the maintenance of injection molding machines - Monitor daily preventive maintenance job - Monitor daily down mould checking status - Repair complicated mould and improve the failure mould - Carry out regular communication with Production and Design team to monitor the progress according to production schedule - Analyze the machine data, part...

  • Production Supervisor(Molding

    1 week ago

    Ulu Tiram, Johor, Malaysia Agensi Pekerjaan Alpha Alliance Sdn Bhd Full time 5,000 - 75,000 per year

    Job Responsibilities1. Daily Production OversightSupervise daily operations of injection molding and manual/automated assembly lines.Ensure production schedules are met with high efficiency and quality standards.Coordinate manpower, materials, and machine resources for optimal productivity.2. Quality & ComplianceEnsure compliance with ISO 13485, GMP, and FDA...

  • Textile Technician

    6 days ago

    Ulu Tiram, Malaysia Meiban Technologies (Malaysia) Sdn Bhd Full time

    We are looking for several Textile Technician to support in preparing the materials and perform process setup in the manufacturing of fabrics to ensure output volume, product quality and shipment commitments meet targeted levels. **Responsibilities: - ** - Prepare the materials according to production plan. - For Production - verify correct material is...

  • 6390

    2 weeks ago

    Ulu Tiram, Johor, Malaysia Agensi Pekerjaan Minde Group Full time 3,000 - 4,000 per year

    Job Title: Molding TechnicianLocation: Desa Cemerlang, Johor BahruCompany Overview:A global leader in manufacturing, this company produces cutting-edge products for various industries. With a focus on innovation and technology, they are seeking a Molding Technician to join their team and ensure the smooth operation of molding processes in their manufacturing...

  • Production Technician

    2 weeks ago

    Ulu Tiram, Malaysia See Hau Global Sdn Bhd. Full time

    REQUIREMENTS: - At least 1 Year(s) of working experience in the related field is required for this position - Experience in Plastic Molding Injection or molding press set-up skill would be an advantage. - Experienced in tooling changes and initial injection molding press set-up. **Responsibilities**: - Mold installation, machine set-up, start-up and...

  • Injection Moulding Expert

    4 days ago

    Ulu Tiram, Malaysia MEIBAN TECHNOLOGIES (MALAYSIA) SDN BHD Full time

    1. Develop new processes, assess and document new and existing processes. Implement and evaluate changes to existing processes designed to improve product quality, productivity and overall equipment efficiency. 2. Provide technical leadership and mentorship to process technicians, operators and other molding personnel 3. Operating machines that inject...

  • Tooling Technician

    6 days ago

    Ulu Tiram, Malaysia JOBBUILDER Full time

    1. Responsible for modification/repair/production mold assembly/disassembly, turning job. Ensure mold assembly according to drawing and customer specification. - 2. Responsible for mold maintenance job. - 3. Responsible for production dates specified on the Tooling Repair/Maintenance Request. - 4. Responsible to fill in all working documents/information and...