Pre-furnace Technician, Blast Furnace Workshop

1.Responsible for communicating with the feeding controller and blast furnace manager, charge and distribute the material according to the requested order. 2.Command charging technician to prepare raw material according to real time usage and material type. 3.Responsible for preparing the charging order plan according to the blast furnace deputy senior...

1.Responsible for checking the working condition of the bag to ensure that the gas dust content is 5mg/m3. 2.Responsible for adjusting the gas release pressure regularly to ensure safe operation of gas pipeline network. 3.Responsible for conducting point check for the operation of the bag filter and replace the damaged bag in time. Alliance Steel (M) Sdn Bhd...

1. According to the production close the fan ban,open the rising pipe cover ,and open the coal charging hole cover to dry the furnace. 2.Open the high pressure ammonia. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and officially commissioned in June 2019, it is the largest steel manufacturer in Malaysia in terms of output capacity and range of...

1. Have to understand function of pulverized coal injection equipment familliar with pulverized coal injection equipment operation. 2. Ensure coal injection to the blast furnace is balanced, stable and sufficient. 3. When there are changes in the blast furnace coal requirement must be able to calculate the injection rate per minute,per 10 minute and per half...

1. Be responsible for the loading and batching of the heating furnace, and ensure the correct operation according to the technical operation rules and the requirements of the steel feed card, so as to eliminate the occurrence of the accident of the stuck wall, stuck pipe and billet arch and turn over the furnace. 2, strictly implement the "heating furnace...

1. Be responsible for timely and accurate weighing of alloy materials, and participate in terminal sampling, temperature measurement, argon blowing operation and ladle insulation operation. 2. Responsible for deoxidation and alloying operations in the process of steel drawing, and determined the alloy yield. 3. Communicate with the furnace chief frequently...

1. Complete the coke pushing, coal leveling and production plan of the shift, and convey the production instructions issued by the working section. 2. Clean the furnace door and furnace door frame of the shift, and assist the furnace door station to replace the problematic furnace door. 3. Deal with the remaining coal and coke of the shift, and assist the...

1. Be responsible for the coke blocking production operation of the shift, obey the shift leader's management, and cooperate to complete the production planning task of the shift. 2. Be responsible for cleaning the furnace door, furnace frame, replacing the furnace door in question, and making the patrol inspection record of the group's equipment points. 3....

1. Have to understand function of pulverized coal injection equipment familliar with pulverized coal injection equipment operation. 2. Ensure coal injection to the blast furnace is balanced, stable and sufficient. 3. When there are changes in the blast furnace coal requirement must be able to calculate the injection rate per minute,per 10 minute and per half...

1. Responsible for the sorting, shovel, and furnace rolling of the billet in the responsible on-site workshop area. 2. Responsible for the organization and planning of the site in the responsible on-site workshop area. 3. In conjunction with the steel-making Testing station, the rolling mill must be meticulous, and the production should be carried out...