Thermal Conversion Technologist

**8 YEARS EXPERIENCE IN THIS POSITION ** COMMUNICATE ENTIRELY IN CHINESE ï‚-Responsible to ensure that the thermal conversion heat transfer will break the most unstable CC bond, so the substituted alkali will be the first to break. ï‚-Significant increase in saturation ratio for the whole product will be observed, which is commonly reported as an aromatic increase in heavier products, as reported ï‚-He should also analyze the technology and weight of Athabasca asphaltenes before and always convert them to hydrocarbons ï‚-Make sure the temperature is controlled below 525 ° C ï‚-Adjusting the thermal temperature and the temperature change will come with the equilibrium between the content of aliphatic-C and volatile compounds and between S-evolution and pyrolysis product results for the thermolysis of C7-asphaltenes from different crude oils. ï‚-Getting the heaviest fractions shows a greater composition change than the lighter fractions during heat conversion. ï‚-Make sure the thermal conversion heat transfer fraction is the most unaffected, with the decrease in its stability caused by becoming more insoluble in the air. ï‚-Report during asphalt heat on thermal conversion is associated with macro structural transformation caused by microstructural changes caused by conversion. ï‚-Ensure that the low reactivity of the heat and vapor boilers in proportion to the substituents has been suggested to be largely responsible for the macro structural changes observed for the asphaltene fraction ï‚-Maintain thermal conversion heat transfer high enthalpy of steam water at high temperature has a significant economic value and, it can be used to produce electric energy, in order to supply electricity, not only for the own incineration power plant, but, more important, supply to the national electric network ï‚-To burning dangerous industrial wastes with high calorific power can replace the coal, as fuel to supply the co-incineration furnace, until 40%, with, mainly, used oils, solvents and organic. ï‚-Conducted the combustion chamber, in order to valorise its calorific power and, to reuse the release heated, supplying into the PPV reactor. ï‚-To ensure the reduction of CO, it's important to increase the air flow and, consequently, the excess of oxygen. ï‚-Make Conversion remaining solid wastes, the incineration process produces ashes and slags, which will be characterized more ahead. ï‚-To expand in the production of heat, electricity, and fuels for transport. ï‚-To contribute significantly toward the objectives of reducing greenhouse gas emissions and alleviating problems related to climate change.
BUSINESS AS MANAGING, SUPERVISING, DESIGNING, CONSULTING, OPERATING, TESTING IN DEALING IN ELECTRICITY, POWER STATION AND ALL FORMS OF ENERGY AND POWER GENERATED BY ANY SOURCE AND ENVIRONMENTAL ENGINEERING IN RELATION TO THE WATER, AIR, LAND AND INDUSTRIAL POLLUTION.
Master's or Equivalent