Production Test Technician 2

1 day ago

Simpang Empat, Perak, Malaysia Lam Research Full time
What you'll do
Supports Manufacturing activities such as design, test, modification, and assembly of electromechanical systems, devices, and specialized test equipment. Applications may include electronic circuits, photonics, and logic systems.Works from work instructions, schematics, diagrams, and appropriate documents. Works with layouts or defined plans to perform testing and trouble-shooting functions.Performs operational test and fault isolation on systems and equipment.Assists in determining methods or actions to remedy malfunctions.Understands and can operate all test equipment. Uses manufacturing, test, development, or diagnostic equipment, including, but not limited to, test programs, oscilloscopes, signal generators and specialized test apparatus.Effectively read and follow work instructions for proper product assembly functionMay troubleshoot basic mechanical & software issues within the assembly manufacturing environmentEscalate problem and/or solution to appropriate groupCreate NCIs and supplier investigations for logistics Other Responsibilities

Safety Protocol:

Complete all required safety trainingFollow safe work practices by lifting no more than 35 pounds, using ergonomic pads, stretching when needed, etc.Adhere to personal and product safety guidelines by:utilizing appropriate PPE following clean room proceduresfollowing Lockout Tagout policies and procedures (LOTO and ZEST)utilizing fixtures (lift hoists, lift track, gantry cranes, lifting tool) to aid in the assembly of tools Perform Risk Management By Walking Around (RMBWA) inspections and document, correct and/or escalate safety issues/hazards to appropriate individuals/departmentsSupports safe work environment by responding directly and quickly to unsafe practices; escalates to next level manager (safety representative, lead, supervisor, manager); and escalates any unresolved issues (incorrect use of hoist, poor placement of tools/cords/ladders, etc., not using cones or barriers, PPE misuse)

Communication:

Provide timely information and responses to supervisors and co-workers by phone/written form/email/in personCommunicate verbally and in writing to appropriate groups/locations when:Identifying production issuesSuggesting continuous improvementsGiving system status during shift pass downsParticipate in meetings and training Who we're looking for
Minimum Diploma in Electronics & Electrical, Mechanical or Mechatronic Engineering1-2 years of related electrical and electronics testing experience depending on levelEffective written and verbal communication skills in EnglishBe flexible and responsive to changing priorities including but not limited to rework, overtime and potential limited travel to other Lam/customer facilitiesUtilize computer-based data systems and applicationsProficient in Microsoft Office software (e.g. Microsoft Excel, Word, Outlook, Teams)

Job Requirements:

Work 12-plus hour shifts in fast paced and time-sensitive environmentSquat, kneel, walk, climb, stand and operate in ergonomically- challenging positions for over 50% of timeLift 35 poundsPerform repetitive motions using hands and various hand toolsDistinguish between colors for wire identificationUse Hand Tools including but not limited to: Calipers, Circuit tester, Wrenches, Hoists, Ohm meters, Screwdrivers, Torque wrenches, Ladders/platforms, Snipping tools/cutters Competencies
Mechanical Assembly, Troubleshooting and RepairElectrical and Electronics TestingProduct KnowledgeCritical ThinkingComputers and Software Our commitment

We believe it is important for every person to feel valued, included, and empowered to achieve their full potential. By bringing unique individuals and viewpoints together, we achieve extraordinary results.

Lam Research ("Lam" or the "Company") is an equal opportunity employer. Lam is committed to and reaffirms support of equal opportunity in employment and non-discrimination in employment policies, practices and procedures on the basis of race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status, sex (including pregnancy, childbirth and related medical conditions), gender, gender identity, gender expression, age, sexual orientation, or military and veteran status or any other category protected by applicable federal, state, or local laws. It is the Company's intention to comply with all applicable laws and regulations. Company policy prohibits unlawful discrimination against applicants or employees.

Lam offers a variety of work location models based on the needs of each role. Our hybrid roles combine the benefits of on-site collaboration with colleagues and the flexibility to work remotely and fall into two categories – On-site Flex and Virtual Flex. 'On-site Flex' you'll work 3+ days per week on-site at a Lam or customer/supplier location, with the opportunity to work remotely for the balance of the week. 'Virtual Flex' you'll work 1-2 days per week on-site at a Lam or customer/supplier location, and remotely the rest of the time.

  • Test Engineer

    2 weeks ago

    Simpang Empat, Perak, Malaysia Fair Work (M) Sdn. Bhd. Full time 21,000 - 42,000 per year

    ResponsibilitiesDesigning test jig and implementing testing (automated) for related products, troubleshooting, writing up test procedures or any related duties when the need arises.ICT fixture design and flying probe test programming.Ensure new equipment and tester is properly qualified, calibrated and maintained according to corresponding procedures.Resolve...

  • Quality Inspector 2

    7 days ago

    Simpang Empat, Perak, Malaysia Lam Research Full time

    The group you'll be a part of Quality Department The impact you'll make Ensuring all product inspected as per customer quality expectation What you'll do Quality Technician responsible to perform product audit, prepares reports and summarizes findings related to non-conformance and defect encounters while conducting product pre-shipment audit and final...

  • Electrical Technician | Up to RM3,000 | Simpang Ampat, Penang

    5 days ago

    Simpang Empat, Perak, Malaysia EMA Agensi Pekerjaan Full time

    About the company:Our client has been established in 1995. The company is a subsidiary of a well-established Japanese multinational group with a strong global presence in the steel and materials industry.The company specializes in the manufacturing and sales of welding consumables, including covered electrodes and other welding materials for various...

  • Senior Staff Engineer Validation Software Test

    2 weeks ago

    Simpang Empat, Perak, Malaysia Infineon Full time 120,000 - 180,000 per year

    Work on, develop and optimize existing validation tools to ensure robust post silicon validation Ensure tool quality through rigorous testing of the developed tools before going to production Deliver ongoing improvements to post silicon validation environments and methodologies Collaborate with global cross-functional teams to develop and implement...

  • Software Technician

    7 days ago

    Simpang Empat, Perak, Malaysia Agensi Pekerjaan Aseana Sdn Bhd Full time

    Job Scope:Support automation and scheduling systems to ensure smooth production operations.Assist in implementing efficiency improvements for cycle time, tool utilization, and factory dispatching.Collaborate with internal teams to maintain and update scheduling models and automation processes.Provide training and documentation for OI systems and...

  • Reliability & Calibration Technician

    2 weeks ago

    Simpang Empat, Perak, Malaysia SMT Technologies Sdn Bhd Full time 12,500 - 30,000 per year

    REQUIREMENTSMinimum Diploma in Electrical, Electronic or Mechatronics Engineering.Fresh graduates are encouraged to apply.Basic knowledge of calibration processes and equipment is an advantage.Good coordination skills when dealing with vendors and internal teams.Strong attention to detail and good documentation/report-writing skills.KEY RESPONSIBILITIES2.1...

  • Manufacturing Engineer 2

    7 days ago

    Simpang Empat, Perak, Malaysia Lam Research Full time

    The group you'll be a part of The Global Operations Group brings information systems, facilities, supply chain, logistics, and high-volume manufacturing together to drive the engine of our global business operations. We help Lam deliver industry-leading solutions with speed and efficiency, while actively supporting the resilient and profitable growth of...

  • Staff Specialist Reliability

    2 weeks ago

    Simpang Empat, Perak, Malaysia Infineon Full time 60,000 - 120,000 per year

    Support production process improvement task force, perform risk assessment for the failure to meet customer requirement Implementing good cost control, productivity improvement and process continuous improvement projects Coordinates cross functional projects and activities with counterparts local and abroad on time within budget Participate and collaborate...

  • Manufacturing Engineer 2

    7 days ago

    Simpang Empat, Perak, Malaysia Lam Research Full time

    The group you'll be a part of The impact you'll make Join Lam as a Manufacturing Engineer where you'll play a crucial role in supporting the new product pilot production factory, virtual manufacturing, or high-volume manufacturing production factory. Using your knowledge of technology and engineering principles you will oversee the planning, development,...

  • Circuit Engineer

    5 days ago

    Simpang Empat, Perak, Malaysia InTalent Consulting Sdn. Bhd. Full time

    We are seeking a skilled and detail-oriented Circuit Engineer (Senior) to join our engineering team. This role involves hands-on circuit testing, debugging, and validation of power electronics products such as DC-DC converters. The ideal candidate will have experience in troubleshooting complex hardware issues, implementing process improvements, and...