Process Technician

2 days ago

Pasir Gudang, Johor, Malaysia Masimo Full time $30,000 - $60,000 per year
Description

Job Summary: 



​​​​The Process Technician is responsible for performing assigned technical tasks, assist with process development and generation of visual instructions and procedures, completes assigned duties on time, follows document procedures, and maintains compliance. ​​​ 



 Duties & Responsibilities: 

​​Create manufacturing documentation required to support manufacturing, testing, and production operations. 



​Create simple tools, fixtures, and jigs to support production operations. 



​Assist Process Engineers with various tasks necessary to support daily manufacturing operations. 



​Initiate troubleshooting, root cause analysis and identifying effective solutions to production problems or NPI projects.  



​Coordinate communication to Production Operators or Process Engineers on root causes analysis and findings. 



​Assist Process Engineers in executing Continuous Improvement activity - Yield, Cycle Time improvement etc.  



​Assist to Quote and Request P.O. for New Equipment's, Fixtures and Tools. 



​Supports investigation of non-conforming materials. 



​Support and perform validation activities (IQ, OQ and PQ) lead by Process Engineers.  



​Support and perform continuous verification of manufacturing equipment, to make sure equipment is in good working conditions and maintain its validated state.  



​Perform any other reasonable duties/task assigned by Supervisor/Superior.​ 



Minimum & Preferred Qualifications and Experience: 



 Minimum Qualifications:  



​​1 years of experience in Production Sustaining and/or New Product Introduction Projects. 



​Demonstrated skills in basic electronics and/or mechanical design aptitude. 



​Ability to communicate in Malay (written and oral) and basic English (written and oral).  



​Ability to perform basic data analysis.  

Preferred Qualifications: 



​​Experience in high volume manufacturing environment. 



​Experience with optical / electro-mechanical assembly and testing. 



​Electronic and mechanical equipment troubleshooting skills. 



​Experience with CAD software. 



​Knowledge on ISO



​General knowledge in Lean Manufacturing; SPC techniques, QC tools etc.  



​​ 



Education: 



​​Certificate/Diploma in Mechanical, Mechatronics, Manufacturing, Electrical or Electronics or higher.  



Physical requirements/Work Environment  



​​​This position primarily works in a production environment.  It is requiring frequent sitting, standing and walking.  Daily use of a computer and other computing and digital devices is required. 



​The physical demands of the position described herein are essential functions of the job and employees must be able to successfully perform these tasks for extended periods.  Reasonable accommodations may be made for those individuals with real or perceived disabilities to perform the essential functions of the job described.​​ 



  • Blow/Injection Moulding/Plastic Process Technician

    2 weeks ago

    Pasir Gudang, Johor, Malaysia Palmtop Sdn Bhd Full time 20,000 - 30,000 per year

    Job Summary: The Blow/Injection Moulding Process Technician is responsible for setting up, operating, and maintaining blow and injection moulding machines to ensure the production of high-quality products. This role involves troubleshooting equipment issues, performing routine maintenance, and ensuring that all processes run smoothly and efficiently.Key...

  • Engineering Technician

    2 days ago

    Pasir Gudang, Johor, Malaysia Ferrotec Power Semiconductor Full time 24,000 - 36,000 per year

    Job Scope:Check and confirm the operational status of production equipment.Communicate effectively with line personnel, technicians, and engineers during job executionEnsure equipment is properly inspected, maintained, and serviced.Optimize machine programs and set-ups to meet or exceed theoretical product run-rate.Identify and report violations or...

  • Molding Engineer, Process

    2 days ago

    Pasir Gudang, Johor, Malaysia Masimo Full time 60,000 - 120,000 per year

    Job SummaryJOB DESCRIPTIONThe Engineer, Molding is responsible to coordinate molding processes used in manufacturing.Duties & ResponsibilitiesEnsure Molding production equipment and machinery in the plant achieves minimum machine downtime and obtains minimum NCR.Provide engineering support to Production, Engineering and QC in terms of process improvement,...

  • Molding Engineer, Process

    2 days ago

    Pasir Gudang, Johor, Malaysia Masimo Full time 80,000 - 120,000 per year

    DescriptionJob Summary:The Engineer, Molding is responsible to coordinate molding processes used in manufacturing. Duties & Responsibilities:Ensure Molding production equipment and machinery in the plant achieves minimum machine downtime and obtains minimum NCR. Provide engineering support to Production, Engineering and QC in terms of process improvement,...

  • Production Technician

    2 days ago

    Pasir Gudang, Johor, Malaysia Acetalent Group Full time 12,000 - 28,800 per year

    Production Setup & Operation: Prepare and operate production equipment according to job orders, utilizing appropriate tooling, materials, andsetting parameters.Process Monitoring & Adjustment: MMonitor production processes, make necessary adjustments to machine parameters, and report issues to engineersor managers.Preventive Maintenance: Perform routine...

  • Mechanical Technician

    2 days ago

    Pasir Gudang, Johor, Malaysia Unigra Food Processing Asia Pacific Sdn Bhd Full time 40,000 - 60,000 per year

    1. For Production Mechanical Technician :Job DescriptionTo perform Machine inspection, Preventive maintenance, Corrective Maintenance and attend to Machine breakdown troubleshoot for ensure all equipment in the Plant are in good condition at all-time ready for production.Plant utilities Daily Check/Operation and MaintenanceTo maintain and carry out...

  • Research And Development Technician

    2 days ago

    Pasir Gudang, Johor, Malaysia Unigrà APAC Full time 40,000 - 60,000 per year

    Job DescriptionPrototypes development in the laboratory to achieve all goals in team or in autonomy with minimal supervision.Report all the test and development processes and resultsGood documentations, able to perform journals research and assist superior on development.Be responsible for making sure the sample, equipment, and any raw materials are handled...

  • Plant Service Technician

    2 days ago

    Pasir Gudang, Johor, Malaysia YYZ Bina Resources Full time 24,000 - 54,000 per year

    We are currently looking for dedicated and motivated to join as Service Technician team based at Plentong/Pasir Gudang, JB Plant Factory. Interested candidate will be remunerated and well compensate with attractive salary and benefits. Dedicated technical training, personal development and career advancement will be fully guided by our expert engineers for...

  • Quality Technician

    2 days ago

    Pasir Gudang, Johor, Malaysia Masimo Full time 60,000 - 80,000 per year

    Job SummaryJOB DESCRIPTIONQuality Technician responsible for providing technical support for all aspects of quality engineering throughout the product realization process and Quality System. This position will handle multiple projects from product validation, through manufacture and Quality System Requirements. The incumbent provides a key role to ensure...

  • Quality Technician

    2 days ago

    Pasir Gudang, Johor, Malaysia Masimo Full time 40,000 - 60,000 per year

    DescriptionJob Summary:Quality Technician responsible for providing technical support for all aspects of quality engineering throughout the product realization process and Quality System.  This position will handle multiple projects from product validation, through manufacture and Quality System Requirements. The incumbent provides a key role to ensure...