Maintenance Technician

As a Hotel Maintenance Technician & Handyman, you will provide general maintenance of the property including but not limited to, repairs throughout the hotel's interior (guestrooms, bathrooms, hallways, lobby, restaurant etc) and exterior. You will maintain hotel's appearance and equipment operating according to the hotel standards. Perform maintenance and...

DUTIES & RESPONSIBILITIES: Able to troubleshooting on mechanical at machine faulty Understand functioning about mechanical part of machine Worked on the improvement of equipment reliability Skill in mechanical engineering with industrial line manufacturing or developing And testing various mechanical equipment Significantly reduced maintenance cost and...

Syarat-syarat : 1. Mempunyai pengetahuan asas kerja-kerja elektrikal 2. Fit to work 3. Kesanggupan untuk bekerja di luar daerah (outstation) apabila perlu Tugas-tugas : - Penyenggaraan dan operasi ke atas sistem pepasangan elektrik dengan memastikan tatacara/prosedur yang betul - Melaksanakan kerja-kerja testing, servicing dan kerja-kerja lain - Membantu...

1. Stamping machine maintenance as per schedule 2. Repair machine breakdown immediately 3. Take care the cleanliness of machine, tools and materials used 4. Takes care the cleanliness of machine, tools and material used 5. Workplace housekeeping 6. Report to superior immediately for any abnormal issue arising 7. Provides relevant technical report 8. Follows...

Job Description 1. In-charge of daily machine set up and shut down 2. Repairs machine breakdown immediately 3. Do machine maintenance 4. Takes care the cleanliness of machine, tools and material used 5. Verifies the first daily output 6. Checks the production line's electricity & air pressure 7. Reports to superior immediately for any abnormal issue arising...

Do you have experience in PCB assembly/refurbishment and troubleshoots with PCB assembly equipment? Are you looking for an opportunity where you can develop your expertise and challenge yourself? Then you came to the right place We are looking for a TECHNICAL ENGINEERINGYour responsibility are:1. To responsible for the operation, maintenance, and calibration...

As a Hotel Maintenance Technician & Handyman, you will provide general maintenance of the property including but not limited to, repairs throughout the hotel's interior (guestrooms, bathrooms, hallways, lobby, restaurant etc) and exterior. You will maintain hotel's appearance and equipment operating according to the hotel standards. Perform maintenance and...

To comply with company procedure, rules and regulations. - To adhere HSE requirement and perform safe work in workplace. - To ensure and maintain good 6S practice in workplace and maintenance workshop. - Be aware of any significant environmental aspects associated with their work and work area including proper handling of scheduled wastes. - To communicate...

Job Responsibilities: - Inspect machine engine and mechanical/electrical components to diagnose issues accurately. - Inspect machine computer and electronic systems to repair, maintain and upgrade. - Conduct routine maintenance work (replacing fluids, lubricating parts etc.) aiming to machines functionality and longevity. - Schedule future maintenance...

Responsibilities Plant technician is to assist the Plant Engineer for the day to day activities and complete the tasks assigned as follow: - DUTIES & RESPONSIBILITIES: - To provide service and plan routine activities to meet target service level. - To carry out servicing, repairs & maintain equipment’s in order ensure smooth operations for customers. -...

Perform a variety of work in the maintenance and repair of Kamdar branches at various location in the Northern Region including air-condition servicing, carpentry, electrical, plumbing, and painting tasks - To do daily technical inspection rounds and checks on the proper functioning of installations (such as air-condition outlets, fire alarm, lift, JKKP,...

**DUTIES & RESPONSIBILITIES**: - Able to troubleshooting on mechanical at machine faulty - Understand functioning about mechanical part of machine - Worked on the improvement of equipment reliability - Skill in mechanical engineering with industrial line manufacturing or developing And testing various mechanical equipment - Significantly reduced maintenance...

Perform a variety of work in the maintenance and repair of Kamdar branches at various location in the Northern Region including air-condition servicing, carpentry, electrical, plumbing, and painting tasks To do daily technical inspection rounds and checks on the proper functioning of installations (such as aircondition outlets, fire alarm, lift, JKKP, Bomba,...

Syarat-syarat : 1. Mempunyai pengetahuan asas kerja-kerja elektrikal 2. Fit to work 3. Kesanggupan untuk bekerja di luar daerah (outstation) apabila perlu Tugas-tugas : - Penyenggaraan dan operasi ke atas sistem pepasangan elektrik dengan memastikan tatacara/prosedur yang betul - Melaksanakan kerja-kerja testing, servicing dan kerja-kerja lain - Membantu...

1. Stamping machine maintenance as per schedule 2. Repair machine breakdown immediately 3. Take care the cleanliness of machine, tools and materials used 4. Takes care the cleanliness of machine, tools and material used 5. Workplace housekeeping 6. Report to superior immediately for any abnormal issue arising 7. Provides relevant technical report 8. Follows...

Job Description 1. In-charge of daily machine set up and shut down 2. Repairs machine breakdown immediately 3. Do machine maintenance 4. Takes care the cleanliness of machine, tools and material used 5. Verifies the first daily output 6. Checks the production line’s electricity & air pressure 7. Reports to superior immediately for any abnormal issue...

Minor repairs. - Technician Work & Preventive Maintenance. - Capable to do Machine's Improvement - Any addition duties assign and as required by Head of Department or management date to date. **Job Types**: Full-time, Contract Contract length: 3 months **Salary**: RM1,600.00 - RM2,500.00 per month **Benefits**: - Free parking - Meal...

Do you have experience in PCB assembly/refurbishment and troubleshoots with PCB assembly equipment? Are you looking for an opportunity where you can develop your expertise and challenge yourself? Then you came to the right place! We are looking for a TECHNICAL ENGINEERING. Your responsibility are: 1. To responsible for the operation, maintenance, and...

Responsibilities: - As a Supervisor, you will be responsible for overseeing and coordinating the daily operations of our oil and gas projects in Malaysia. Your primary duties will include: - Leading and managing a team of technicians and operators in executing project plans, ensuring work is completed safely, efficiently, and within budget. - Providing...

Responsibilities and Duties: - Perform repairs on machinery, plumbing, lighting, electrical, Air Conditioner, Welding and other related works in medium scale manufacturing operation. - Troubleshoot, repair and install related repairs as and when necessary - Perform basic tasks such as painting, tile replacement and filling crevices, clean facilities and...

Responsibilities and Duties: Perform repairs on machinery, plumbing, lighting, electrical, Air Conditioner, Welding and other related works in medium scale manufacturing operation. Troubleshoot, repair and install related repairs as and when necessary Perform basic tasks such as painting, tile replacement and filling crevices, clean facilities and managing...

Minor repairs. Technician Work & Preventive Maintenance. Capable to do Machine's Improvement Any addition duties assign and as required by Head of Department or management date to date.Job Types: Full-time, ContractContract length: 3 monthsSalary: RM1, RM2,500.00 per monthBenefits: Free parking Meal providedSchedule: Day shiftAbility to commute/relocate:...

**職責與責任：** - 能夠對機器故障進行機械故障排除 - 了解機器機械部分的功能 - 致力於提高設備可靠性 - 具備工業生產線製造或開發和測試各種機械設備的機械工程技能 - 顯著降低維修成本和設備停機時間 - 生產停機率始終保持在 3% 以下 - 機械部分知識。 -...

_Hands on Service and perform preventive and corrective maintenance on building Civil, Mechanical & Electrical appliances_ - _Daily routine inspection on Incoming TNB Supply, Building Water Supply System, MSB, Rectifier, HVAC & UPS System to ensure in good working condition._ - _Perform standby genset offload test and other ancillary equipment on a scheduled...

Clinsam Enterprise Job Highlights - Work from office - Monday to Friday We are looking for a **Machining Technician(CNC/Plastic Injection) **to join our team based in Malaysia We are looking for the right people to do the work. Roles and Responsibilities: - Program, set-up, and operate both CNC and conventional machine tools to produce precision parts...

Job Scope - Responsible in trouble shooting, repairing, maintenance and servicing of factory's production machineries/equipment. - Carry out effective maintenance and inspection work in a timely manner. - to assist supervisor in project enhancement to improve production. - Ensure the reporting and data collection of the breakdown and other information for...