Technician

As a Hotel Maintenance Technician & Handyman, you will provide general maintenance of the property including but not limited to, repairs throughout the hotel's interior (guestrooms, bathrooms, hallways, lobby, restaurant etc) and exterior. You will maintain hotel's appearance and equipment operating according to the hotel standards. Perform maintenance and...

Penerangan kerja:- Menyelenggara, menyelesaikan masalah, melakukan pembaikan pada semua peralatan penyejukan, Sistem Penyaman Udara dan Pengudaraan, peralatan dan semua penyejuk. (termasuk unit berpecah dan udara berpusat)- Pemeriksaan rutin harian ke atas kerja-kerja kejuruteraan mekanikal (terutama pada peralatan Air-Con).- Untuk memastikan sistem Penyaman...

1. Melaksanakan tugas-tugas asas termasuk mengecat dan mengisi celah, menguruskan pembaikan penyelenggaraan.2. Melakukan pembaikan pada mesin, peralatan atau perkakas syarikat. Mengesan dan laporkan keperluan pembaikan penyelenggaraan utama.3. Periksa ruang komuniti secara berkala untuk mengenal pasti masalah - sampah, kerosakan mekanikal atau kerosakan.4....

Job Description 1. In-charge of daily machine set up and shut down 2. Repairs machine breakdown immediately 3. Do machine maintenance 4. Takes care the cleanliness of machine, tools and material used 5. Verifies the first daily output 6. Checks the production line's electricity & air pressure 7. Reports to superior immediately for any abnormal issue arising...

1. Stamping machine maintenance as per schedule 2. Repair machine breakdown immediately 3. Take care the cleanliness of machine, tools and materials used 4. Takes care the cleanliness of machine, tools and material used 5. Workplace housekeeping 6. Report to superior immediately for any abnormal issue arising 7. Provides relevant technical report 8. Follows...

Do you have experience in PCB assembly/refurbishment and troubleshoots with PCB assembly equipment? Are you looking for an opportunity where you can develop your expertise and challenge yourself? Then you came to the right place We are looking for a TECHNICAL ENGINEERINGYour responsibility are:1. To responsible for the operation, maintenance, and calibration...

**職責與責任:**- 能夠對機器故障進行機械故障排除- 了解機器機械部分的功能- 致力於提高設備可靠性- 具備工業生產線製造或開發和測試各種機械設備的機械工程技能- 顯著降低維修成本和設備停機時間- 生產停機率始終保持在 3% 以下- 機械部分知識。-...

DUTIES & RESPONSIBILITIES: Able to troubleshooting on mechanical at machine faulty Understand functioning about mechanical part of machine Worked on the improvement of equipment reliability Skill in mechanical engineering with industrial line manufacturing or developing And testing various mechanical equipment Significantly reduced maintenance cost and...

Responsibilities Plant technician is to assist the Plant Engineer for the day to day activities and complete the tasks assigned as follow: - DUTIES & RESPONSIBILITIES: - To provide service and plan routine activities to meet target service level. - To carry out servicing, repairs & maintain equipment’s in order ensure smooth operations for customers. -...

As a Hotel Maintenance Technician & Handyman, you will provide general maintenance of the property including but not limited to, repairs throughout the hotel's interior (guestrooms, bathrooms, hallways, lobby, restaurant etc) and exterior. You will maintain hotel's appearance and equipment operating according to the hotel standards. Perform maintenance and...

1. Melaksanakan tugas-tugas asas termasuk mengecat dan mengisi celah, menguruskan pembaikan penyelenggaraan. 2. Melakukan pembaikan pada mesin, peralatan atau perkakas syarikat. Mengesan dan laporkan keperluan pembaikan penyelenggaraan utama. 3. Periksa ruang komuniti secara berkala untuk mengenal pasti masalah - sampah, kerosakan mekanikal atau...

Penerangan kerja: - Menyelenggara, menyelesaikan masalah, melakukan pembaikan pada semua peralatan penyejukan, Sistem Penyaman Udara dan Pengudaraan, peralatan dan semua penyejuk. (termasuk unit berpecah dan udara berpusat) - Pemeriksaan rutin harian ke atas kerja-kerja kejuruteraan mekanikal (terutama pada peralatan Air-Con). - Untuk memastikan sistem...

QA Technician required conduct quality test for company product. MANUFACTURING Diploma / Advanced Diploma / Higher Graduate Diploma / DVM / DKM Level 4 / DLKM Level 5

Job Description 1. In-charge of daily machine set up and shut down 2. Repairs machine breakdown immediately 3. Do machine maintenance 4. Takes care the cleanliness of machine, tools and material used 5. Verifies the first daily output 6. Checks the production line’s electricity & air pressure 7. Reports to superior immediately for any abnormal issue...

1. Stamping machine maintenance as per schedule 2. Repair machine breakdown immediately 3. Take care the cleanliness of machine, tools and materials used 4. Takes care the cleanliness of machine, tools and material used 5. Workplace housekeeping 6. Report to superior immediately for any abnormal issue arising 7. Provides relevant technical report 8. Follows...

To peform the machine setup inspection & ensure 1st piece sample submission before any mass production To perform the routine in process inspection inspection job assigned and ensure the goods inspected are comply to customer specifiation & IPC stds. To report any non-conformance material to QC Supervisor for any reject detected. To ensure proper...

Do you have experience in PCB assembly/refurbishment and troubleshoots with PCB assembly equipment? Are you looking for an opportunity where you can develop your expertise and challenge yourself? Then you came to the right place! We are looking for a TECHNICAL ENGINEERING. Your responsibility are: 1. To responsible for the operation, maintenance, and...

To peform the machine setup inspection & ensure 1st piece sample submission before any mass production To perform the routine in process inspection inspection job assigned and ensure the goods inspected are comply to customer specifiation & IPC stds. To report any non-conformance material to QC Supervisor for any reject detected. To ensure proper...

Syarat-syarat : 1. Mempunyai pengetahuan asas kerja-kerja elektrikal 2. Fit to work 3. Kesanggupan untuk bekerja di luar daerah (outstation) apabila perlu Tugas-tugas : - Penyenggaraan dan operasi ke atas sistem pepasangan elektrik dengan memastikan tatacara/prosedur yang betul - Melaksanakan kerja-kerja testing, servicing dan kerja-kerja lain - Membantu...

Job Description 1. In-charge of daily machine set up and shut down 2. Repairs machine breakdown immediately 3. Do machine maintenance 4. Takes care the cleanliness of machine, tools and material used 5. Verifies the first daily output 6. Checks the production line’s electricity & air pressure 7. Reports to superior immediately for any abnormal issue...

1. Stamping machine maintenance as per schedule 2. Repair machine breakdown immediately 3. Take care the cleanliness of machine, tools and materials used 4. Takes care the cleanliness of machine, tools and material used 5. Workplace housekeeping 6. Report to superior immediately for any abnormal issue arising 7. Provides relevant technical report 8. Follows...

To perform daily activities of manufacturing of wire cable at production line follow Safety Work Instruction Requirement. - To check and ensure that line parameters are in order and in conformity with stipulated or recommended specifications of the production line. - Ensure all safety instruction are followed. - To perform any other related or similar duties...

Product quality controllers check the quality of manufactured products. They work in manufacturing facilities where they perform basic inspection and evaluation of products before, during or after the production process. MANUFACTURING Diploma / Advanced Diploma / Higher Graduate Diploma / DVM / DKM Level 4 / DLKM Level 5

To comply with company procedure, rules and regulations. - To adhere HSE requirement and perform safe work in workplace. - To ensure and maintain good 6S practice in workplace and maintenance workshop. - Be aware of any significant environmental aspects associated with their work and work area including proper handling of scheduled wastes. - To communicate...

Job Responsibilities: - Inspect machine engine and mechanical/electrical components to diagnose issues accurately. - Inspect machine computer and electronic systems to repair, maintain and upgrade. - Conduct routine maintenance work (replacing fluids, lubricating parts etc.) aiming to machines functionality and longevity. - Schedule future maintenance...

**DUTIES & RESPONSIBILITIES**: - Regularly maintain and calibrate QA dept equipment/instruments to ensure high quality analysis results. - Maintain measurement instrument and work place in good condition, clean and tidy. - Compile quality failure for abnormal defects. - Prepare FAI/dimensional reports. - Support in customer sample preparation. - Responsible...

Job Responsibilities: - The duties of a tire technician include installing, balancing, and repairing tires. - You will be responsible for inspecting tires on client vehicles, making tire repairs, and installing new tires and wheels when necessary. - Tire technicians repair and install tires on cars, trucks, and heavy vehicles. - You may also be required to...

Responsibilities: - As a Supervisor, you will be responsible for overseeing and coordinating the daily operations of our oil and gas projects in Malaysia. Your primary duties will include: - Leading and managing a team of technicians and operators in executing project plans, ensuring work is completed safely, efficiently, and within budget. - Providing...