Piping Designer

1 week ago

Kuala Lumpur, Kuala Lumpur, Malaysia ABI Resources & Services Pte Ltd Full time

JOB RESPONSIBILITIES:

  • Report to, and provide support to the Piping Lead/ Pipe Stress Lead Engineer on assigned projects and report to the Department Head at the basis level.
  • Review the Client's technical requirements for Piping stress Engineering and establish the stress Design Basis/philosophy for various load cases, specification, Standards and guidelines for stress engineering execution
  • Preparation of stress critical line list as per the critical line selection criteria
  • Plan ,schedule and progress control for the critical computer Stress calculations and visual reviews
  • Performs static analysis using CAESAR II for the load cases such as dead weight, sustained loads, Thermal expansion/contraction, Wave acceleration, Hag/sag Deflections, occasional and environmental loads, blast load, fatigue, slug, transportation, module lift and vibration Analysis.
  • Provide effective stress solution for the Topside modules critical Piping and Deck Piping which involves equipment's such as Compressor, Turbines, Pumps, vessels, separator ,Heat exchangers and Pipe rack Piping
  • Provide technical solution for the noncritical line by performing visual reviews
  • Monitoring, checking and approving of stress calculations as per the checking procedure
  • Collaborate well within team and communicate effectively with Piping Lead Engineer. Designers, Pipe support Engineers/Designers and Piping material engineers
  • Managing the interface with Process engineer, Structural Engineer, Mechanical Engineer and Safety Engineer for the assigned Module/Area for stress activities
  • Vendor drawing review for the static Equipment's/ Rotating Equipment's/ Packages and ensure all the piping loads are within the recommended limit
  • Stress check on the IFC Isometrics / Pipe supports
  • Preparation of stress Isometrics and stress reports
  • Review and provide technical inputs on critical Pipe support design and/or Pipe stress related technical matters.
  • Be responsible for Pipe stress Engineering activities and deliverables to ensure that the design complies with the specification, integrity and quality requirements of the project.
  • Be responsible to incorporate the specific technical requirements in the Piping engineering design such as, vibration and fatigue
  • Provide technical support to the project to obtain necessary approvals from the verification body / classification society or other applicable approving authorities.

REQUIREMENTS:

  • Around 12 years of experience, worked in an engineering setup for upstream oil & gas projects (platforms & FPSO projects) serving in the capacity of a Senior stress Engineer.
  • Must possess a thorough understanding and knowledge of oil and natural gas industry standards such as, but not limited to, ASME, API (American Petroleum Institute), BS, European Regulations and other relevant standards and guidelines, such as Energy Institute.
  • Excellent knowledge of and must have accrued hands on experience with International Codes and Standards.
  • Must have had prior work experience with medium/ large sized brownfield and green field projects in the Oil and Gas sector with similar roles and accountabilities and possess an excellent understanding of project phases, milestones and deliverables.
  • Experience in FPSO projects and HPHT services preferred

QUALIFICATIONS:

  • At minimum a Bachelor's degree in Mechanical Engineering or other equivalent engineering specialization.

OTHER SKILLS

  • Excellent in technical communication (oral and written) skills with proven ability to present technical issues to design teams, client technical authorities, and client's project management representatives and approving bodies.
  • A selfstarter and be able to work with mínimal supervision, make sound decisions, take independent action, analyse problems and provide focused solutions to assigned projects.
  • Strong interpersonal and communication skills and be able to work well with people at all levels in the organization.
Contract length: 12 months

Pay:
RM12, RM15,000.00 per month

Schedule:

  • Monday to Friday

  • Piping Designer

    1 week ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Air Products Malaysia Sdn Full time

    At Air Products, our purpose is to bring people together to reimagine what's possible, collaborate and innovate solutions to the world's most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the...

  • Senior Layout and Piping Engineer

    3 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Randstad Malaysia Full time

    about the companya reputable EPCC contractor with extensive experience offering comprehensive solutions to fulfill the needs of clients in Malaysia's petrochemicals, chemical, and general industries. about the jobDevelop and implement standards and concepts to meet job requirements.Plan pipe routing and equipment layout studies.Carry out engineering design...

  • Senior Layout and Piping Engineer

    2 months ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Randstad Malaysia Full time

    about the companya reputable EPCC contractor with extensive experience offering comprehensive solutions to fulfill the needs of clients in Malaysia's petrochemicals, chemical, and general industries. about the jobDevelop and implement standards and concepts to meet job requirements.Plan pipe routing and equipment layout studies.Carry out engineering design...

  • Project proposal engineer mnc piping company

    1 month ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Agensi Pekerjaan Btc Sdn Bhd Full time

    Open Position: Project Proposal Engineer (MNC Piping Company) A MNC Piping Company is looking for Project Proposal Engineer to be based in SelangorKey requirements include:Conduct material take off and product selection via printed or digital drawings. Perform 2 D and 3 D CAD design of pipe spool skid and fabrication drawings. Perform project cost and...

  • Project proposal engineer mnc piping company

    1 week ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Agensi Pekerjaan Btc Sdn Bhd Full time

    Open Position: Project Proposal Engineer (MNC Piping Company) A MNC Piping Company is looking for Project Proposal Engineer to be based in SelangorKey requirements include:Conduct material take off and product selection via printed or digital drawings. Perform 2 D and 3 D CAD design of pipe spool skid and fabrication drawings. Perform project cost and...

  • Project proposal engineer mnc piping company

    3 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Agensi Pekerjaan Btc Sdn Bhd Full time

    Open Position: Project Proposal Engineer (MNC Piping Company) A MNC Piping Company is looking for Project Proposal Engineer to be based in SelangorKey requirements include:Conduct material take off and product selection via printed or digital drawings. Perform 2 D and 3 D CAD design of pipe spool skid and fabrication drawings. Perform project cost and...

  • Process Designer

    1 week ago

    Kuala Lumpur, Kuala Lumpur, Malaysia McDermott Full time

    Company Overview:People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us.Our ingenuity fuels daily life.Together, we've forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure...

  • E3D Admin

    1 week ago

    Kuala Lumpur, Kuala Lumpur, Malaysia ABI ENERGY SDN BHD Full time

    Responsibilities: Designing & Modeling of Process Piping Layout using E3D Software Checking of Isometrics Review clash checks report & resolve clashes. Sound knowledge of modeling Piping support for Modules in offshore FPSOs & Fixed platforms is mandatory Shall be able to perform design tasks independently with min supervision Design pipe supports using...

  • Electrical Designer

    1 week ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Air Products Malaysia Sdn Full time

    At Air Products, our purpose is to bring people together to reimagine what's possible, collaborate and innovate solutions to the world's most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the...

  • E3D/ PDMS Designer

    1 month ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Randstad Malaysia Full time

    about the companyYour future employer is a MNC O&G company that specializes in providing a wide range of products and services to the refining, petrochemical, and natural gas industries. They are known for their expertise in catalysis and adsorption technologies and offer proprietary processes for licensing. about the jobManage and ensure the database...

  • E3D/ PDMS Designer

    1 week ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Randstad Malaysia Full time

    about the companyYour future employer is a MNC O&G company that specializes in providing a wide range of products and services to the refining, petrochemical, and natural gas industries. They are known for their expertise in catalysis and adsorption technologies and offer proprietary processes for licensing. about the jobManage and ensure the database...

  • E3D/ PDMS Designer

    3 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Randstad Malaysia Full time

    about the companyYour future employer is a MNC O&G company that specializes in providing a wide range of products and services to the refining, petrochemical, and natural gas industries. They are known for their expertise in catalysis and adsorption technologies and offer proprietary processes for licensing. about the jobManage and ensure the database...

  • Subsea Engineer

    1 week ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Genesis Oil and Gas Consultants Full time

    Genesis has united over 1,000 world-leading engineers in 16 cities around the world. Together, we have raised the bar in early phase engineering consultancy, full-lifecycle subsea engineering services, feed and detailed design of onshore and offshore projects. Using a deeper understanding of client objectives, constraints, market, environment and...

  • Subsea Engineer

    1 week ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Genesis Oil and Gas Consultants Full time

    About Genesis EnergiesGenesis has united over 1,000 world-leading engineers in 16 cities around the world. Together, we have raised the bar in early phase engineering consultancy, full-lifecycle subsea engineering services, feed and detailed design of onshore and offshore projects. Using a deeper understanding of client objectives, constraints, market,...

  • Driver for Director

    1 week ago

    Kuala Lumpur, Kuala Lumpur, Malaysia HENGJHOE CONSTRUCT SDN BHD Full time

    Postmen/Postwomen deliver mails and parcel posts to residences and businesses. They perform mail delivery and collect signatures from the recipients. They perform other duties in connection with mail services from post offices or related organisations.We are an established company involved in plumbing constructionOur nature of business: Design & Construction...

  • Csa Designer

    1 week ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Air Products Malaysia Sdn Full time

    At Air Products, our purpose is to bring people together to reimagine what's possible, collaborate and innovate solutions to the world's most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the...

  • Welder

    1 week ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Mentor Solutions & Resources Sdn Bhd Full time

    Requirement: At least 5 years of experiences in prefabrication, installation and welding for piping and structure At least 3 years of working experiences as supervisor level for the piping and structure fabrications At least 3 years of working experiences as the welder of stainless and carbon steel pipes in the recent 5 years At least 3 years of working...

  • Principal Instrumentation Designer

    1 week ago

    Kuala Lumpur, Kuala Lumpur, Malaysia McDermott Full time

    Company Overview:People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us.Our ingenuity fuels daily life.Together, we've forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure...

  • Repair Technician

    1 week ago

    Kuala Lumpur, Kuala Lumpur, Malaysia HENGJHOE CONSTRUCT SDN BHD Full time

    Career opportunity: Training provided. Being part of a positive cultured company. Progress with company expansion. Potential sales commissions.Requirements:1. Possesses driver's license 2. GDL license (Provided by the company) 3. Driving around Klang Valley 4. Willing to learn the trade 5. Travelling and working with workers 6. Working with machinery & hand...

  • Senior Engineer, Piping

    1 month ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Petroplan Full time

    Yearly renewable contract PO Basis (no work, no pay)Degree in Mechanical Engineering from a recognised institution. Minimum of 9 years of experience in oil & gas design engineering. Registered with Board of Engineers Malaysia (BEM). About Petroplan Petroplan is the trusted, specialist global Talent Solutions partner of choice for employers and professionals...