Principal Instrumentation Designer

2 weeks ago

Kuala Lumpur, Kuala Lumpur, Malaysia McDermott Full time

Company Overview:

People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us.

Our ingenuity fuels daily life.

Together, we've forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality:

laying subsea infrastructure thousands of feet below sea level, installing offshore platforms hundreds of miles from shore, and using our expertise to design and build offshore wind infrastructure.

For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.

Here, what you do matters.

Job Overview:

Key Tasks and Responsibilities:

  • Prepare the development of key project deliverables, including (but not limited to) the following:
  • Junction box/panel wiring diagrams/strip reports(SPI)
  • Populate instrument index in SPI for design
  • Block diagrams
  • Installation details
  • Analyzer systems (wiring and tubing connections and tieins)
  • Instrument / fire & gas location plans
  • Telecom location plans
  • MTO's & associated Bills of Material
  • Instrument loop sheets (SPI)
  • Building layouts
  • Cable schedules/lists
  • Cable sizing
  • 3D Instrument modeling
  • Participate in project reviews, including (but not limited to) the following:
  • P&ID Reviews (as required)
  • Model Reviews
  • Independent Design Reviews (IDR)
  • Development and support of vendor packages, including (but not limited to) the following:
  • Create and issue required MTO for vendor package interfaces
  • Create all design drawings to allow interface to vendor packages with remainder of facility including electrical
  • Perform design review of supplier documents for instrument and noninstrument packages
  • Provide support for the Inspection and Factory Acceptance Testing (FAT) of mechanical packages
  • Site Support, including (but not limited to) the following:
  • Provide technical support to Construction personnel for I&C design related inquiries a s needed
  • Project development and coordination activities (when acting as the Lead Designer), including (but not limited to) the following:
  • Maintain and promote a focus on McDermott's end-product throughout engineering, fabrication or construction
  • Take responsibility for vendor package review and associated interfaces
  • Become fully familiar with the project contract, scope of work, basis of design, specifications, schedule and all interdiscipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues
  • Coordinate closely with piping and I&C engineering with inline dimensional data
  • Report to and coordinate with engineering lead, as well as with instrument design manager
  • Supervise and coordinate all activities associated with instrument designers
  • Carefully evaluate, communicate and manage change with full awareness of project impact
  • Assist the I&C lead engineer with cost, schedule, quantity, progress, budget control and quality of project deliverables
  • Support model reviews

Essential Qualifications and Education:

  • Typically 15+ years of detailed instrument design experience, including 12 years in the oil & gas industry on EPC projects
  • Function as an instrument project design lead or instrument task lead if required
  • Detailed knowledge of design techniques, sequence of deliverables, and schedules
  • Proven project coordination and execution skills in delivery of completed project design deliverables
  • Indepth technical knowledge of the detailed design process involving large cap EPC Projects
  • Experience with the utilization of multiple office project execution (MOPEX).
  • Proven experience with Smart Plant Instrumentation (SPI), AutoCad, MS Office Suite including Excel and Word

Preferred Qualifications and Education:

  • Prefer AS degree
  • Prefer prior design lead experience on EPC projects for petrochemical, oil & gas
  • Prefer experience at site during construction and commissioning
LI-RI1

  • Principal Instrumentation

    2 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia McDermott Full time

    Company Overview:People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us.Our ingenuity fuels daily life.Together, we've forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure...

  • Principal Instrumentation

    2 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia McDermott Full time

    Job Overview:Key Tasks and Responsibilities:Prepare the development of key project deliverables, including (but not limited to) the following:Philosophies and Specifications ICSS Architecture Design Cause & Effect Diagrams SIL Calculations Complex Loop Descriptions Vessel Level Sketches Instrument Index, I/O List, Range, Alarm and Trip Summary (RATS)...

  • Instrumentation Designer

    2 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Wood Plc Full time

    Overview / Responsibilities:Wood is currently recruiting for a Instrumentation Designer with extensive experience in the oil and gas petrochemical industry.The Instrumentation Designer is responsible for:Generating accurate work on Instrument Design, ensuring conformance with project Design Basis and PEQP Soliciting review and checks of work as appropriate...

  • Lead Instrumentation Designer

    2 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Wood Plc Full time

    Overview / Responsibilities:Wood is currently recruiting for a Lead Instrumentation Designer with extensive experience in the oil and gas petrochemical industry.The Lead Instrumentation Designer are responsible for:Ensuring this department guideline is appropriately implemented on projects under their supervision Overseeing quality activities on project...

  • Instrument Designer

    2 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia EXEN INTERNATIONAL SDN BHD Full time

    JOB SCOPE Able to perform site visit and prepare site visit checklist. Responsible to verify scope as per ITB To provide draft, sketch and detail design To assist engineer in issue of technical drawing Responsible to check on drawing to make sure that the drawing follow as per client standard. Able to liaise with client regarding to any issue of instrument...

  • 3D Instrument Designer

    2 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia ABI Resources & Services Pte Ltd Full time

    ABI Resources is looking for a 3D Instrument Designer who matches this job description to work together with usJob responsibilities: Assist senior Designer in the production & modification of wiring and loop drawings. Carrying out all tasks assigned by Senior/lead designer in accordance with the discipline procedures and practices. Ensure that the work is...

  • 2d Instrument Designer

    2 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia ABI Resources & Services Pte Ltd Full time

    ABI Resources is looking for a 2D Instrument Designerwho matches this job description to work together with usJob responsibilities: Assist senior Designer in the production & modification of wiring and loop drawings. Carrying out all tasks assigned by Senior/lead designer in accordance with the discipline procedures and practices. Ensure that the work is...

  • Senior Instrument Engineer

    2 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia PetroHorizon Sdn Bhd Full time

    Job Description Requirements:Candidates must possess at least a Degree in Instrumentation or Chemical Engineering background. Minimum 6 years' experience with at least 5 years of engineering design experience in Oil & Gas and Petrochemical industries. Experienced in handling rejuvenation and revamp projects. Familiar with international codes and standards...

  • Instrumentation & Controls Eng

    2 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia McDermott Full time

    Company Overview:People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us.Our ingenuity fuels daily life.Together, we've forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure...

  • Principal Product Designer

    2 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Coda Payments Full time

    Principal Product DesignerWhat We DoAt Coda, we break down barriers between publishers and their audiences by thinking outside of the app. Coda is trusted by 300+ top digital content publishers - including industry giants Activision Blizzard, Bigo, Electronic Arts, Riot Games, and Zynga - to grow revenue, profit margins, and customer engagement in 60+...

  • Principal / Lead Architect

    2 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Management Recruitment Group Full time

    Overview:We are seeking a highly skilled and experienced Principal / Lead Architect to join our team specializing in industrial building projects. As the Principal / Lead Architect, you will be responsible for leading the architectural design process from conception to completion, ensuring the successful delivery of industrial facilities that meet our...

  • Electrical Designer

    2 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Air Products Malaysia Sdn Full time

    At Air Products, our purpose is to bring people together to reimagine what's possible, collaborate and innovate solutions to the world's most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the...

  • Advanced Instruments Engineer

    1 month ago

    Kuala Lumpur, Kuala Lumpur, Malaysia ExxonMobil Full time

    About us At ExxonMobil, we aim to be at the forefront of energy innovations that drive modern living and contribute to achieving a net-zero future. As a leading publicly traded energy and chemical company, we thrive on our diverse and dedicated workforce who take pride in our mission and values. The success of our Upstream, Product Solutions, and Low Carbon...

  • Advanced Instruments Engineer

    2 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia ExxonMobil Full time

    About us At ExxonMobil, we aim to be at the forefront of energy innovations that drive modern living and contribute to achieving a net-zero future. As a leading publicly traded energy and chemical company, we thrive on our diverse and dedicated workforce who take pride in our mission and values. The success of our Upstream, Product Solutions, and Low Carbon...

  • Advanced Instruments Engineer

    4 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia ExxonMobil Full time

    About us At ExxonMobil, we aim to be at the forefront of energy innovations that drive modern living and contribute to achieving a net-zero future. As a leading publicly traded energy and chemical company, we thrive on our diverse and dedicated workforce who take pride in our mission and values. The success of our Upstream, Product Solutions, and Low Carbon...

  • Principal Specialist Developer

    2 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia LMA Full time

    LMA Kuala Lumpur, MalaysiaPosted 15 minutes ago Permanent RM102k - RM126kPrincipal Specialist Developer (Frontend-.Net-Angular9)Location: Kuala Lumpur - MalaysiaThe Principal Specialist Developer is responsible for assessing, analyzing, and providing functional specifications and solutions for business changes and needs. They will work closely with the team...

  • Associate Principal

    2 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Arup Full time

    Joining ArupArup's purpose, shared values and collaborative approach has set us apart for over 75 years, guiding how we shape a better world.This role as an Associate Principal - Structural is to successfully lead, manage and continually develop a profitable and viable structural engineering team in Kuala Lumpur, within the overall operations and strategic...

  • Principal Structural Engineer

    2 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia SBM OFFSHORE Full time

    ROLE PURPOSEThe Principal Structural Engineer utilizes technical expertise to develop and deliver safe and quality solutions with minimal guidance. The Principal Structural Engineer works well and effectively with project stakeholders, inter-discipline leads and engineering team to achieve project objective and ensure quality in engineering delivery in a...

  • Workday Financials Principal Consultant

    2 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Cognizant Technology Solutions Full time

    Title:Workday Financials Principal ConsultantLocation:Kuala Lumpur, MalaysiaExperience: 5-12 YearsCognizant is seeking a Financials Principal Consultant to be based in Kuala Lumpur.As a Principal Consultant, you will guide clients through the transformation, implementation and operation phases of a Workday implementation. Additionally, you must have a...

  • Workday Financials Principal Consultant

    2 weeks ago

    Kuala Lumpur, Kuala Lumpur, Malaysia Cognizant Full time

    Title:Workday Financials Principal ConsultantLocation:Kuala Lumpur, MalaysiaExperience: 5-12 YearsCognizant is seeking a Financials Principal Consultant to be based in Kuala Lumpur.As a Principal Consultant, you will guide clients through the transformation, implementation and operation phases of a Workday implementation. Additionally, you must have a...