Instrumentation Designer

2 weeks ago


Kuala Lumpur, Kuala Lumpur, Malaysia Wood Plc Full time

Overview / Responsibilities:
Wood is currently recruiting for a Instrumentation Designer with extensive experience in the oil and gas petrochemical industry.

The Instrumentation Designer is responsible for:

  • Generating accurate work on Instrument Design, ensuring conformance with project Design Basis and PEQP
  • Soliciting review and checks of work as appropriate
  • Utilizing checklists and other quality tools as they execute project work
  • Keeping the Lead Engineer and/or Lead Designer informed of all conflicts that may arise with
implementing the project standards and requirements

  • Perform 2D AutoCAD design drawings such as layout, cable block diagram, hookups, wiring diagram,
installation details, cable schedule, MTO, etc.

  • Perform 3D PDMS/E3D design modeling including clash check
  • Perform SPI for wiring diagram, loop diagram, termination diagram,etc


All instrument design deliverables shall be prepared in compliance with project technical requirements, applicable codes, industry practices, department standards, and constructability.


Skills / Qualifications:
The Instrumentation Designer shall has a minimum qualification as below:

  • Diploma/Certificate in Technical course
  • Minimum total of 15 years of design experience in oil and gas project
  • Minimum of 8 years experience as a designer in oil & gas project
  • Good in AutoCAD software to perform 2D design drawings
  • Good in 3D PDMS software to perform 3D design modeling
  • Knowledge in SPI to perform wiring diagram, loop diagram, termination diagram, etc
  • Proactive & team work
  • Good communication with peer
  • Able to work under pressure and over the normal business hours

Company Overview:

Diversity Statement:
We are an equal opportunity employer that recognises the value of a diverse workforce.

All suitably qualified applicants will receive consideration for employment on the basis of objective criteria and without regard to the following (which is a non-exhaustive list): race, colour, age, religion, gender, national origin, disability, sexual orientation, gender identity, protected veteran status, or other characteristics in accordance with the relevant governing laws.



  • Kuala Lumpur, Kuala Lumpur, Malaysia Wood Plc Full time

    Overview / Responsibilities:Wood is currently recruiting for a Lead Instrumentation Designer with extensive experience in the oil and gas petrochemical industry.The Lead Instrumentation Designer are responsible for:Ensuring this department guideline is appropriately implemented on projects under their supervision Overseeing quality activities on project...


  • Kuala Lumpur, Kuala Lumpur, Malaysia McDermott Full time

    Company Overview:People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us.Our ingenuity fuels daily life.Together, we've forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure...

  • Instrument Designer

    2 weeks ago


    Kuala Lumpur, Kuala Lumpur, Malaysia EXEN INTERNATIONAL SDN BHD Full time

    JOB SCOPE Able to perform site visit and prepare site visit checklist. Responsible to verify scope as per ITB To provide draft, sketch and detail design To assist engineer in issue of technical drawing Responsible to check on drawing to make sure that the drawing follow as per client standard. Able to liaise with client regarding to any issue of instrument...


  • Kuala Lumpur, Kuala Lumpur, Malaysia ABI Resources & Services Pte Ltd Full time

    ABI Resources is looking for a 3D Instrument Designer who matches this job description to work together with usJob responsibilities: Assist senior Designer in the production & modification of wiring and loop drawings. Carrying out all tasks assigned by Senior/lead designer in accordance with the discipline procedures and practices. Ensure that the work is...


  • Kuala Lumpur, Kuala Lumpur, Malaysia ABI Resources & Services Pte Ltd Full time

    ABI Resources is looking for a 2D Instrument Designerwho matches this job description to work together with usJob responsibilities: Assist senior Designer in the production & modification of wiring and loop drawings. Carrying out all tasks assigned by Senior/lead designer in accordance with the discipline procedures and practices. Ensure that the work is...


  • Kuala Lumpur, Kuala Lumpur, Malaysia PetroHorizon Sdn Bhd Full time

    Job Description Requirements:Candidates must possess at least a Degree in Instrumentation or Chemical Engineering background. Minimum 6 years' experience with at least 5 years of engineering design experience in Oil & Gas and Petrochemical industries. Experienced in handling rejuvenation and revamp projects. Familiar with international codes and standards...


  • Kuala Lumpur, Kuala Lumpur, Malaysia McDermott Full time

    Company Overview:People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us.Our ingenuity fuels daily life.Together, we've forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure...


  • Kuala Lumpur, Kuala Lumpur, Malaysia McDermott Full time

    Job Overview:Key Tasks and Responsibilities:Prepare the development of key project deliverables, including (but not limited to) the following:Philosophies and Specifications ICSS Architecture Design Cause & Effect Diagrams SIL Calculations Complex Loop Descriptions Vessel Level Sketches Instrument Index, I/O List, Range, Alarm and Trip Summary (RATS)...


  • Kuala Lumpur, Kuala Lumpur, Malaysia McDermott Full time

    Company Overview:People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us.Our ingenuity fuels daily life.Together, we've forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure...


  • Kuala Lumpur, Kuala Lumpur, Malaysia ExxonMobil Full time

    About us At ExxonMobil, we aim to be at the forefront of energy innovations that drive modern living and contribute to achieving a net-zero future. As a leading publicly traded energy and chemical company, we thrive on our diverse and dedicated workforce who take pride in our mission and values. The success of our Upstream, Product Solutions, and Low Carbon...


  • Kuala Lumpur, Kuala Lumpur, Malaysia ExxonMobil Full time

    About us At ExxonMobil, we aim to be at the forefront of energy innovations that drive modern living and contribute to achieving a net-zero future. As a leading publicly traded energy and chemical company, we thrive on our diverse and dedicated workforce who take pride in our mission and values. The success of our Upstream, Product Solutions, and Low Carbon...


  • Kuala Lumpur, Kuala Lumpur, Malaysia ExxonMobil Full time

    About us At ExxonMobil, we aim to be at the forefront of energy innovations that drive modern living and contribute to achieving a net-zero future. As a leading publicly traded energy and chemical company, we thrive on our diverse and dedicated workforce who take pride in our mission and values. The success of our Upstream, Product Solutions, and Low Carbon...

  • Electrical Designer

    2 weeks ago


    Kuala Lumpur, Kuala Lumpur, Malaysia Air Products Malaysia Sdn Full time

    At Air Products, our purpose is to bring people together to reimagine what's possible, collaborate and innovate solutions to the world's most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the...

  • Ui/ux Designer

    2 weeks ago


    Kuala Lumpur, Kuala Lumpur, Malaysia AS White Global Pty Ltd Full time

    The OpportunityOur partner is an Australia-based start-up company, offering service to B2B users. They are looking for a UIUX designer who'll provide crucial support in crafting user-centric interfaces for our B2B product, focusing on data visualization interfaces and user interaction from the Thailand office.You'll work closely with the technical team,...

  • UX/UI Designer

    2 weeks ago


    Kuala Lumpur, Kuala Lumpur, Malaysia Cargobase Full time

    Having an intuitive and clean design is fundamental to building a great product. You'll be instrumental in creating a product that is used by some of the largest companies in the world.At Cargobase, we're building a collaborative tool to connect shippers (logistic departments) and freight forwarders to work together on different kinds of freight. From urgent...

  • E3D/ PDMS Designer

    1 month ago


    Kuala Lumpur, Kuala Lumpur, Malaysia Randstad Malaysia Full time

    about the companyYour future employer is a MNC O&G company that specializes in providing a wide range of products and services to the refining, petrochemical, and natural gas industries. They are known for their expertise in catalysis and adsorption technologies and offer proprietary processes for licensing. about the jobManage and ensure the database...

  • E3D/ PDMS Designer

    4 weeks ago


    Kuala Lumpur, Kuala Lumpur, Malaysia Randstad Malaysia Full time

    about the companyYour future employer is a MNC O&G company that specializes in providing a wide range of products and services to the refining, petrochemical, and natural gas industries. They are known for their expertise in catalysis and adsorption technologies and offer proprietary processes for licensing. about the jobManage and ensure the database...

  • E3D/ PDMS Designer

    2 weeks ago


    Kuala Lumpur, Kuala Lumpur, Malaysia Randstad Malaysia Full time

    about the companyYour future employer is a MNC O&G company that specializes in providing a wide range of products and services to the refining, petrochemical, and natural gas industries. They are known for their expertise in catalysis and adsorption technologies and offer proprietary processes for licensing. about the jobManage and ensure the database...

  • Csa Designer

    2 weeks ago


    Kuala Lumpur, Kuala Lumpur, Malaysia Air Products Malaysia Sdn Full time

    At Air Products, our purpose is to bring people together to reimagine what's possible, collaborate and innovate solutions to the world's most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the...


  • Kuala Lumpur, Kuala Lumpur, Malaysia Air Products Full time

    AS-MY-Kuala LumpurJob Description and Qualifications Manager of Process Controls Job Description SummaryBe responsible for his discipline's performance within the project.The Manager of process controls has two major key functions: implementing technical competence and managing the team of his discipline within the various projects globally.This position...