Instrumentation & Controls Eng
5 months ago
**Company Overview**:
People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us.
Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing offshore platforms hundreds of miles from shore, and using our expertise to design and build offshore wind infrastructure.
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
Here, what you do matters.
**Job Overview**:
Responsible for instrumentation & control systems engineering design, analysis and development of an assigned scope of work on a McDermott project. Work includes (but not limited to) P&ID development along with associated instrument index maintenance, instrument data sheet and calculation development, development of basic Integrated Control and Safety System (ICSS) deliverables and supplier document review of vendor packages.
**Key Tasks and Responsibilities**:
- Prepare the development of key project deliverables, including (but not limited to) the following:
- Cause & Effect Diagrams
- Vessel Level Sketches
- Instrument Index, I/O List, Range, Alarm and Trip Summary (RATS)
- Instrument Data Sheets
- Instrument Calculations (i.e. Valves, Flowmeters, etc.)
- P&ID Development
- Participate in project reviews, including (but not limited to) the following:
- P&ID Reviews
- Development and support of vendor packages, including (but not limited to) the following:
- Create requisition packages for basic instrumentation
- Perform the review of supplier documents for basic instrumentation and mechanical packages
- Site support, including (but not limited to) the following:
- Provide technical support to Construction personnel for I&C engineering-related inquiries as needed
**Essential Qualifications and Education**:
- Accredited engineering degree may be required by specific regions
- Typically 2 - 6 years of I&C engineering experience
- Experience with Smart Plant Instrumentation (SPI), InstruCalc, MS Office Suite including Excel and Word
**Preferred Qualifications and Education**:
- Prefer BSEE, BSCE or BSME degree
- Prefer experience at site during construction and commissioning
LI-RI1
LI-Remote
-
Instrumentation & Controls Eng
6 months ago
Kuala Lumpur, Malaysia McDermott Full time**Company Overview**: People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us. Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea...
-
Associate Instrumentation
5 months ago
Kuala Lumpur, Malaysia McDermott Full time**Job Oveview**: Responsible for basic instrumentation engineering design, analysis and development of an assigned scope of work on a McDermott project. Work includes (but not limited to) P&ID development along with associated instrument index maintenance, instrument data sheet and calculation development and supplier document review of vendor...
-
Principal Instrumentation
5 months ago
Kuala Lumpur, Malaysia McDermott Full time**Company Overview**: People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us. Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea...
-
Principal Instrumentation
5 months ago
Kuala Lumpur, Malaysia McDermott Full time**Job Overview**: **Key Tasks and Responsibilities**: **Prepare the development of key project deliverables, including (but not limited to) the following**: - Philosophies and Specifications - ICSS Architecture Design - Cause & Effect Diagrams - SIL Calculations - Complex Loop Descriptions - Vessel Level Sketches - Instrument Index, I/O List, Range, Alarm...
-
Principal Instrumentation
5 months ago
Kuala Lumpur, Malaysia McDermott Full time**Job Overview**: **Key Tasks and Responsibilities**: **Prepare the development of key project deliverables, including (but not limited to) the following**: - Philosophies and Specifications - ICSS Architecture Design - Cause & Effect Diagrams - SIL Calculations - Complex Loop Descriptions - Vessel Level Sketches - Instrument Index, I/O List, Range, Alarm...
-
Inspector (Instrument & Control)
6 months ago
Kuala Lumpur, Malaysia Mentor Solutions & Resources Sdn Bhd Full time**Qualification**: - Minimum Diploma or related certificate to the discipline - Experience more than 10 years as Inspector (Instrument & Control) - Minimum 5 years of working experience in oil and gas industry **Job Purpose**: - Lead and execute Instrument Engineering aspect of project and OPU support and services, in order to achieve project delivery and...
-
Designer - Instrumentation & Control
6 months ago
Kuala Lumpur, Malaysia EXEN INTERNATIONAL SDN BHD Full time**JOB SCOPE** - Able to perform site visit and prepare site visit checklist. - Responsible to verify scope as per ITB - To provide draft, sketch and detail design - To assist engineer in issue of technical drawing - Responsible to check on drawing to make sure that the drawing follow as per client standard. - Able to liaise with client regarding to any issue...
-
Instrument Designer
5 months ago
Kuala Lumpur, Malaysia NES Fircroft Full timeUnder direction of the lead Instrument and/or lead process Controls Engineer to implement detail design and engineering work for plant controls system, field instrumentation and telecom systems for company invested industrial gas project. - Familiar with Microsoft Office, AutoCAD. - Flexible, able to adapt and learn new skills quickly. - Co-operative,...
-
Instrument Designer
6 months ago
Kuala Lumpur, Malaysia Air Products Malaysia Sdn Full timeAt Air Products, our purpose is to bring people together to reimagine what’s possible, collaborate and innovate solutions to the world’s most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the...
-
Principal Instrumentation Designer
5 months ago
Kuala Lumpur, Malaysia McDermott Full time**Company Overview**: People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us. Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea...
-
Instrument Designer
6 months ago
Kuala Lumpur, Malaysia EXEN INTERNATIONAL SDN BHD Full time**JOB SCOPE** - Able to perform site visit and prepare site visit checklist. - Responsible to verify scope as per ITB - To provide draft, sketch and detail design - To assist engineer in issue of technical drawing - Responsible to check on drawing to make sure that the drawing follow as per client standard. - Able to liaise with client regarding to any issue...
-
3D Instrument Designer
5 months ago
Kuala Lumpur, Malaysia ABI Resources & Services Pte Ltd Full timeABI Resources is looking for a 3D Instrument Designer who matches this job description to work together with us **Job responsibilities**: - Assist senior Designer in the production & modification of wiring and loop drawings. - Carrying out all tasks assigned by Senior/lead designer in accordance with the discipline procedures and practices. - Ensure that...
-
Manager of Process Controls
5 months ago
Kuala Lumpur, Malaysia Air Products Full timeAS-MY-Kuala Lumpur **Job Description and Qualifications** - Manager of Process Controls - Job Description Summary Be responsible for his discipline’s performance within the project. The Manager of process controls has two major key functions: implementing technical competence and managing the team of his discipline within the various projects...
-
Production Coordinator
5 months ago
Kuala Lumpur, Malaysia ENG HING PLASTIC INDUSTRIES SDN BHD Full time1. To check and verify the daily scrap of extrusion, printing & cutting section. 2. To extract/file master sample for production use. 3. To prepare the labels for production use in accordance the production job sheet. 4. To control and maintain the register of stationary, tools and usage by factory worker. 5. To update all the relevant information into the...
-
Apac Reconciliations
6 months ago
Kuala Lumpur, Malaysia FNZ Group Full timeAPAC Reconciliations & Controls Team Leader **Role Description** FNZ Malaysia is an asset custodian. This means we hold client assets in our names as nominee and are responsible for the administration of those assets. The role and responsibilities of an APAC Reconciliations & Controls Team Leader is to oversee the Reconciliations and Pricing controls...
-
Apac Reconciliations
6 months ago
Kuala Lumpur, Malaysia FNZ Full timeRole Description FNZ Malaysia is an asset custodian. This means we hold client assets in our names as nominee and are responsible for the administration of those assets. The role and responsibilities of an APAC Reconciliations & Controls Team Leader is to oversee the Reconciliations and Pricing controls functions within our FNZ platforms within the Asia...
-
Waste Water Treatment Plant Competent Person
6 months ago
Kuala Lumpur, Malaysia Ann Joo Group Full timeCarry out performance monitoring data measurement for leachate treatment & control system operating on-premises Environmental compliance with the Environmental Quality Regulation 2009. - Prepare performance monitoring analysis reports and present to the performance monitoring committee established on the premises. - Implement schedule maintenance activities...
-
Manager Electrical
6 months ago
Kuala Lumpur, Malaysia WAH LOON (M) SDN. BHD. Full timeLead project management team for electrical engineering support especially in HT & LT design. - Lead co-ordination between M&E service and project progress schedule. - Performed all electrical related activities in compliance with health and safety & environmental standards at project site. - Executed all electrical related work orders planned in weekly...
-
Financial Controller
5 months ago
Kuala Lumpur, Malaysia inDrive Full timeHybrid- Full-time- Senior- Now we're looking for a Financial Controller to join our team in Kuala Lumpur. Reporting directly to the VP of Global Financial Reporting & Accounting and cooperating closely with the Reporting, Budgeting and Control, Global Accounting, and Treasury teams, you will be instrumental in maintaining the integrity and accuracy of...
-
Special Grade Technician
6 months ago
Kuala Langat, Malaysia Nestle Operational Services Worldwide SA Full time**Position Snapshot**: Location: Sijangkang, Selangor, MY Company: Nestlé Manufacturing (M) Sdn Bhd Full-time Any background that is related to engineering fields Minimum of 2 years of experience **Position Summary**: Joining Nestlé means you are joining the largest food and beverage company in the world. At our very core, we are a human...