Principal Instrumentation Designer
4 months ago
**Company Overview**:
People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us.
Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing offshore platforms hundreds of miles from shore, and using our expertise to design and build offshore wind infrastructure.
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
Here, what you do matters.
**Job Overview**:
**Key Tasks and Responsibilities**:
- Prepare the development of key project deliverables, including (but not limited to) the following:
- Junction box/panel wiring diagrams/strip reports(SPI)
- Populate instrument index in SPI for design
- Block diagrams
- Installation details
- Analyzer systems (wiring and tubing connections and tie-ins)
- Instrument / fire & gas location plans
- Telecom location plans
- MTO’s & associated Bills of Material
- Instrument loop sheets (SPI)
- Building layouts
- Cable schedules/lists
- Cable sizing
- 3D Instrument modeling
- Participate in project reviews, including (but not limited to) the following:
- P&ID Reviews (as required)
- Model Reviews
- Independent Design Reviews (IDR)
- Development and support of vendor packages, including (but not limited to) the following:
- Create and issue required MTO for vendor package interfaces
- Create all design drawings to allow interface to vendor packages with remainder of facility including electrical
- Perform design review of supplier documents for instrument and non-instrument packages
- Provide support for the Inspection and Factory Acceptance Testing (FAT) of mechanical packages
- Site Support, including (but not limited to) the following:
- Provide technical support to Construction personnel for I&C design related inquiries a s needed
- Project development and coordination activities (when acting as the Lead Designer), including (but not limited to) the following:
- Maintain and promote a focus on McDermott’s end-product throughout engineering, fabrication or construction
- Take responsibility for vendor package review and associated interfaces
- Become fully familiar with the project contract, scope of work, basis of design, specifications, schedule and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues
- Coordinate closely with piping and I&C engineering with in-line dimensional data
- Report to and coordinate with engineering lead, as well as with instrument design manager
- Supervise and coordinate all activities associated with instrument designers
- Carefully evaluate, communicate and manage change with full awareness of project impact
- Assist the I&C lead engineer with cost, schedule, quantity, progress, budget control and quality of project deliverables
- Support model reviews
**Essential Qualifications and Education**:
- Typically 15+ years of detailed instrument design experience, including 12 years in the oil & gas industry on EPC projects
- Function as an instrument project design lead or instrument task lead if required
- Detailed knowledge of design techniques, sequence of deliverables, and schedules
- Proven project coordination and execution skills in delivery of completed project design deliverables
- In-depth technical knowledge of the detailed design process involving large cap EPC Projects
- Experience with the utilization of multiple office project execution (MOPEX).
- Proven experience with Smart Plant Instrumentation (SPI), AutoCad, MS Office Suite including Excel and Word
**Preferred Qualifications and Education**:
- Prefer AS degree
- Prefer prior design lead experience on EPC projects for petrochemical, oil & gas
- Prefer experience at site during construction and commissioning
LI-RI1
-
Principal Instrumentation
5 months ago
Kuala Lumpur, Malaysia McDermott Full time**Job Overview**: **Key Tasks and Responsibilities**: **Prepare the development of key project deliverables, including (but not limited to) the following**: - Philosophies and Specifications - ICSS Architecture Design - Cause & Effect Diagrams - SIL Calculations - Complex Loop Descriptions - Vessel Level Sketches - Instrument Index, I/O List, Range, Alarm...
-
Instrumentation Designer
5 months ago
Kuala Lumpur, Malaysia Wood Plc Full timeOverview / Responsibilities: Wood is currently recruiting for a Instrumentation Designer with extensive experience in the oil and gas petrochemical industry. The Instrumentation Designer is responsible for: - Generating accurate work on Instrument Design, ensuring conformance with project Design Basis and PEQP - Soliciting review and checks of work as...
-
Instrument Designer
5 months ago
Kuala Lumpur, Malaysia NES Fircroft Full timeUnder direction of the lead Instrument and/or lead process Controls Engineer to implement detail design and engineering work for plant controls system, field instrumentation and telecom systems for company invested industrial gas project. - Familiar with Microsoft Office, AutoCAD. - Flexible, able to adapt and learn new skills quickly. - Co-operative,...
-
Instrument Designer
5 months ago
Kuala Lumpur, Malaysia Air Products Malaysia Sdn Full timeAt Air Products, our purpose is to bring people together to reimagine what’s possible, collaborate and innovate solutions to the world’s most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the...
-
Lead Instrumentation Designer
5 months ago
Kuala Lumpur, Malaysia Wood Plc Full timeOverview / Responsibilities: Wood is currently recruiting for a Lead Instrumentation Designer with extensive experience in the oil and gas petrochemical industry. The Lead Instrumentation Designer are responsible for: - Ensuring this department guideline is appropriately implemented on projects under their supervision - Overseeing quality activities on...
-
Instrument Designer
5 months ago
Kuala Lumpur, Malaysia David Kennedy recruitment Full timeMust know Autocad Should be from Oil & Gas industry Senior Structural Engineers - Structural Designers and Drafters - Electrical Engineer - Instrument Engineer - E&I Designers and Drafters **Salary**: RM8,000.00 - RM9,000.00 per month Ability to commute/relocate: - Kuala Lumpur: Reliably commute or planning to relocate before starting work (required)
-
Instrument Designer
5 months ago
Kuala Lumpur, Malaysia EXEN INTERNATIONAL SDN BHD Full time**JOB SCOPE** - Able to perform site visit and prepare site visit checklist. - Responsible to verify scope as per ITB - To provide draft, sketch and detail design - To assist engineer in issue of technical drawing - Responsible to check on drawing to make sure that the drawing follow as per client standard. - Able to liaise with client regarding to any issue...
-
Principal Instrumentation
4 months ago
Kuala Lumpur, Malaysia McDermott Full time**Company Overview**: People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us. Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea...
-
Principal Instrumentation
5 months ago
Kuala Lumpur, Malaysia McDermott Full time**Job Overview**: **Key Tasks and Responsibilities**: **Prepare the development of key project deliverables, including (but not limited to) the following**: - Philosophies and Specifications - ICSS Architecture Design - Cause & Effect Diagrams - SIL Calculations - Complex Loop Descriptions - Vessel Level Sketches - Instrument Index, I/O List, Range, Alarm...
-
3D Instrument Designer
5 months ago
Kuala Lumpur, Malaysia ABI Resources & Services Pte Ltd Full timeABI Resources is looking for a 3D Instrument Designer who matches this job description to work together with us **Job responsibilities**: - Assist senior Designer in the production & modification of wiring and loop drawings. - Carrying out all tasks assigned by Senior/lead designer in accordance with the discipline procedures and practices. - Ensure that...
-
Designer - Instrumentation & Control
5 months ago
Kuala Lumpur, Malaysia EXEN INTERNATIONAL SDN BHD Full time**JOB SCOPE** - Able to perform site visit and prepare site visit checklist. - Responsible to verify scope as per ITB - To provide draft, sketch and detail design - To assist engineer in issue of technical drawing - Responsible to check on drawing to make sure that the drawing follow as per client standard. - Able to liaise with client regarding to any issue...
-
Lead Instrument
5 months ago
Kuala Lumpur, Malaysia MISC Full timePurpose of the Job Develop engineering deliverables for the instrumentation discipline throughout all engineering phases. Lead the execution of all instrumentation deliverables planned by line Manager. Lead the issuance of Conceptual Engineering and Front End Engineering Design deliverables. Lead the review of Detailed Design Engineering...
-
Instrumentation & Controls Eng
5 months ago
Kuala Lumpur, Malaysia McDermott Full time**Company Overview**: People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us. Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea...
-
Principal Piping Designer
5 months ago
Kuala Lumpur, Malaysia McDermott Full time**Company Overview**: People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us. Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea...
-
Instrumentation & Controls Eng
4 months ago
Kuala Lumpur, Malaysia McDermott Full time**Company Overview**: People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us. Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea...
-
Associate Instrumentation
5 months ago
Kuala Lumpur, Malaysia McDermott Full time**Job Oveview**: Responsible for basic instrumentation engineering design, analysis and development of an assigned scope of work on a McDermott project. Work includes (but not limited to) P&ID development along with associated instrument index maintenance, instrument data sheet and calculation development and supplier document review of vendor...
-
Principal Product Designer
5 months ago
Kuala Lumpur, Malaysia Coda Payments Full timePrincipal Product Designer **What We Do** At Coda, we break down barriers between publishers and their audiences by thinking outside of the app. Coda is trusted by 300+ top digital content publishers - including industry giants Activision Blizzard, Bigo, Electronic Arts, Riot Games, and Zynga - to grow revenue, profit margins, and customer engagement in...
-
Principal Product
5 months ago
Kuala Lumpur, Malaysia AirAsia Full timeWe're on a mission to revolutionise the app experience for AirAsia MOVE, and we need a visionary Principal Product Designer to lead the charge. This is your chance to shape the future of our platform, crafting intuitive and delightful experiences for millions of users. If you're a strategic thinker with a passion for user-centred design and the technical...
-
Electrical Designer
5 months ago
Kuala Lumpur, Malaysia Air Products Malaysia Sdn Full timeAt Air Products, our purpose is to bring people together to reimagine what’s possible, collaborate and innovate solutions to the world’s most significant energy and environmental sustainability challenges. Grow with us as we embark on building tomorrow together by being the safest, most diverse and most profitable industrial gas company in the...
-
Principal Product Manager
5 months ago
Kuala Lumpur, Malaysia AirAsia Full time**Are you a data-driven leader passionate about making travel experiences seamless and driving conversions?** We're seeking a highly motivated Principal Product Manager to champion Conversion Rate Optimization (CRO) for the AirAsia MOVE app. This is a critical role where you'll collaborate closely with data science, engineering, and various stakeholders to...