Shift Technician

1 week ago

Kulai, Malaysia BRIDGE DATA CENTRES MALAYSIA SDN BHD Full time

I. The Shift Technician is responsible to performs day-to-day preventive and corrective maintenance in a data center facility for 100% facility uptime. This position is required to perform shift duty including weekend and public holiday.

II. Supporting with monitoring operations, conducting routine rounds inspections (4 hourly) and on-going assessment of the facility systems operations and performance.

III. The position requires an awareness of critical environment operating practices and protocols and routine conduct of hands-on maintenance work on a variety of critical facility systems and equipment in an operating critical environment.

IV. Work requires strong formal conduct of operations skills, good technical knowledge, personal accountability, and flawless execution of work activities commensurate with a highly critical environment and associated expectations for exceptional customer satisfaction and confidence.

ESSENTIAL DUTIES AND RESPONSIBILITIES
- At the direction of Lead Engineer or Shift Engineer Lead/Senior Technician, maintains, monitors, and performs preventive, predictive, and corrective maintenance on critical equipment, which may include the following: mechanical (including HVAC, computer room air conditioners, chillers, and plumbing) electrical (including UPS, DC battery systems, PDU, generators, transfer switches, and switchgear), cabling (including data and voice, broad band), fire detection and suppression, life safety, lighting, temperature control systems, building management systems, and digital systems (including fire alarm, duress, card access, CCTV). Also responsible for operation and maintenance of critical equipment such as refrigeration, heat exchanger, HVAC, electrical, hot water systems. Monitors operation, adjusts, and maintains refrigeration, chilled water, and air conditioning equipment; ventilating and hot water heaters; pumps, valves, piping and filters; other mechanical and electrical equipment; record readings and make adjustments where necessary to ensure proper operation of equipment.
- Responsible to witness maintenance carry out by vendor or OEM vendor is thorough and in good workmanship. Ensure maintenance vendor follows closely to the maintenance work method statement without deviation and sign off for each work step. Should abnormality occur, technician should call for work halt and escalate to monitoring centre and seek for Lead Engineer work clearance prior proceed to perform troubleshoot and/or investigation.
- Routinely performs all work in strict accordance with governing Change Control Application Process, standard operating procedures, and maintenance work instructions.
- Operates and monitors critical system equipment and components. Oversees Change Control Application Process work efforts (including 3rd party contractors) for the safe and compliant operation, maintenance (corrective and preventive), and modification of critical equipment. With the approval from Shift Engineer Lead to disables and enables fire alarm control panels and systems.
- Perform routine round inspections every 4 hourly that covering all plant rooms such as switch rooms, chiller plant room, pumps room, fire sprinkler pump room and water tank room, generators, diesel storage, UPS and battery rooms, CRAC room, Cooling Towers, etc. Ensure system normal operations and report to monitoring centre immediate when abnormality observed.
- Supporting the operations of monitoring center, which is the nerve centre of the Data Centre, involving standing in for shift engineer to ensure building management system is continuously man, handling of incident management (work includes escalation, reporting, investigation, conduct root caused analysis, remediation/rectification through incident closure) and work order management. Respond immediately to emergency situations (fire, evacuation, equipment failure, etc.) and customer concerns.
- Deliver all tasks for customer’s service level agreement are in compliance at all time, the SLA covers such as incident escalate to customer within 15 minutes upon reported to monitoring centre, written incident report issue within 24 hours, etc.
- Other related duties

**Requirements**:

- Professional Trade Certification (in Technical Studies e.g. Electrical, Air-conditioning, Plumbing, Electronics, Building Services) or Diploma in an Engineering field with min 2 to 3 years related work experience
- For Chargeman, a valid Chargeman license of min. A0 certification is compulsory
- Strong technical knowledge with hands on knowledge/experience and understanding of critical data center systems, including ACMV, Standby emergency power, uninterruptible power supplies, and associated infrastructure
- Position will be contractual for 6 - 12 months convertible to permanent

**Job Types**: Full-time, Permanent, Contract

**Salary**: RM2,500.00 - RM4,000.00 per month

**Benefits**:

- Free parking
- Health insurance
- Maternity leave
- Opportunities for promotion
- P

  • Shift Technician

    7 months ago

    Kulai, Malaysia Timesconsult Sdn Bhd Full time

    **Roles and Responsibilities**: - To perform preventive maintenance and remedial maintenance on data centre equipment. - To troubleshoot and fix problems related to data centre equipment. - To assist the Senior Technician, Technical Engineer, Senior Technical Engineer, Team Lead Technical Service Department & Technical Service Manager to conduct preventive...

  • Shift Technician

    7 months ago

    Kulai, Malaysia Agensi Pekerjaan iForte Sdn Bhd Full time

    **Roles and Responsibilities**: 1. To perform preventive maintenance and remedial maintenance on data centre equipment. 2. To troubleshoot and fix problems related to data centre equipment. 3. To assist the Senior Technician, Technical Engineer, Senior Technical Engineer, Team Lead Technical Service Department & Technical Service Manager to conduct...

  • Welding Technician

    7 months ago

    Kulai, Malaysia Makino Asia Sdn Bhd Full time

    **Position** **Welding Technician** **Company** At Bandar Indahpura, I-Park Kulai **Employment type** *Permanent / Full-time **Qualification** *Certificate in welding or minimum 2 years of relevant experience *Fresh graduates are welcomed **Requirement** *Above 18 *Malaysian *Vaccinated **Benefit** *Entitled for all the benefits given by the company...

  • Maintenance Technician

    7 months ago

    Kulai, Malaysia GC PACKAGING SDN BHD Full time

    **Maintenance Technician Responsibilities**: - Inspecting buildings, equipment, and systems to identify any issues. - Conduct daily checking on facilities such as Vacuum Pump, Air Compressor, Air Dryer. - Performing scheduled maintenance tasks (such as greasing) to prevent breakdowns and ensure optimal performance of machinery and equipment. - Repairing...

  • Production Maintenance and Technician

    1 week ago

    Kulai, Malaysia EPS Ventures Sdn Bhd Full time

    **Position: Production Maintenance & Technician** **Tenure: 1 year Contract (Renewable basis)** **Working Hours: 8am — 5pm (Night shift is required if needed)** **Location: Kulai, Johor** **Basic Salary: RM 1700- RM 1800** **Other Benefits**: - **Meal Allowance** - **Travelling Allowance** - **Shift Allowance (If...

  • Production Maintenance and Technician

    1 week ago

    Kulai, Malaysia EPS Malaysia Sdn Bhd Full time

    **Position: Production Maintenance & Technician** **Tenure: 1 year Contract (Renewable basis)** **Working Hours: 8am — 5pm (Night shift is required if needed)** **Location: Kulai, Johor** **Basic Salary: RM 1700- RM 1800** **Other Benefits**: - **Meal Allowance**: - **Travelling Allowance**: - **Shift Allowance (If...

  • Hvac Technician

    7 months ago

    Kulai, Malaysia TimesConsult Full time

    _**JOB SCOPE**_ - To perform preventive maintenance and remedial maintenance on data centre equipment. - To troubleshoot and fix problems related to data centre equipment. - To assist the Senior Technician, Technical Engineer, Senior Technical Engineer, Team Lead Technical Service Department & Technical Service Manager to conduct preventive maintenance and...

  • Sprayer / Technician (2+1 Year Contract, Night

    1 week ago

    Kulai, Malaysia Makino Asia Sdn Bhd Full time

    **Position** *Spray/Painting Technician (Sheet metal fabrication industry) *Night Shift **Employment type** *Contract 2+1 (Year) **Qualification**: - Basic SPM / O Level / SKM Level 1 / SKM Level 2 / SKM Level 3 or Equivalent or 2 years of experience **Requirement** *Above 18 *Malaysian *Vaccinated - Experienced in Spray polyurethane paint (PU Paint ) -...

  • Assembly Technician

    1 week ago

    Kulai, Malaysia Makino Asia Sdn Bhd Full time

    **Position** *Assembly Technician **Employment type** *Contract 2+1 (Year) **Qualification**: - Basic SPM / O Level / SKM Level 1 / SKM Level 2 / SKM Level 3 or Equivalent or 2 years of experience **Requirement** *Above 18 *Malaysian *Vaccinated *Have good knowledge about machine operation. *Able to use advanced tools and measuring instrument. *Ensure...

  • Mandarin Speaking Machinery Technician

    7 months ago

    Kulai, Malaysia Maju Management Enterprise Full time

    **POSITION OVERVIEW** We are seeking a highly motivated and skilled Bakery Machine Mechanic to join our team. In this role, you will be responsible for the installation, maintenance, repair, and troubleshooting of a variety of bakery equipment. You will play a key role in ensuring our production runs smoothly and efficiently. **KEY RESPONSIBITIES** To...

  • Mandarin Speaking Machinery Technician

    7 months ago

    Kulai, Malaysia Maju Management Sdn Bhd Full time

    **POSITION OVERVIEW** We are seeking a highly motivated and skilled Bakery Machine Mechanic to join our team. In this role, you will be responsible for the installation, maintenance, repair, and troubleshooting of a variety of bakery equipment. You will play a key role in ensuring our production runs smoothly and efficiently. **KEY RESPONSIBITIES** To...

  • Facility Technician

    7 months ago

    Kulai, Malaysia HQ Pack Sdn Bhd Full time

    Job Objectives: - Maintaining day-to-day operations of facilities, such as delegating for completing maintenance orders - Performing routine maintenance on facilities and making repairs as needed - Creating reports on maintenance, repairs, safety and other occurrences for supervisors and other relevant staff - Preparing facilities for changing weather...

  • Mandarin Speaking Machinery Technician(Gelang

    7 months ago

    Kulai, Malaysia Maju Management Sdn Bhd Full time

    **POSITION OVERVIEW** We are seeking a highly motivated and skilled Bakery Machine Mechanic to join our team. In this role, you will be responsible for the installation, maintenance, repair, and troubleshooting of a variety of bakery equipment. You will play a key role in ensuring our production runs smoothly and efficiently. **KEY RESPONSIBITIES** To...

  • Technician

    6 months ago

    Kulai, Malaysia CASTCONSULT SDN BHD Full time

    Site & Lab Test - Haredened concrete test - Aggregate test - Soil Test **Job Types**: Full-time, Contract **Salary**: RM2,500.00 per month Schedule: - Day shift Ability to commute/relocate: - Kulai: Reliably commute or planning to relocate before starting work (required)

  • Technician

    7 months ago

    Kulai, Malaysia Samwoo Colorants (Malaysia) Sdn Bhd Full time

    Troubleshoot and repair machinery equipment of facility in the production plant - Perform preventive and corrective maintenance of all facility and machinery equipment as scheduled. - Update and keep maintenance records from time to time. - Maintain proper safekeeping of maintenance tools, machine spare parts and other equipment. - To perform any other tasks...

  • Qc Technician

    7 months ago

    Kulai, Malaysia SIK COLOR (M) SDN BHD Full time

    1.making sure that measuring and testing equipment are set up and working correctly 2.checking that production methods meet relevant legislation 3 Able to rotate shift and working night shift. 4.Maintain all documentation for the purpose of auditing 5 Record test results as required Pay: RM1,500.00 - RM2,000.00 per month

  • Qc Technician

    7 months ago

    Kulai, Malaysia SIK COLOR (M) SDN BHD Full time

    1.making sure that measuring and testing equipment are set up and working correctly 2.checking that production methods meet relevant legislation 3 Able to rotate shift and working night shift. 4.Maintain all documentation for the purpose of auditing 5 Record test results as required **Salary**: RM1,500.00 - RM2,000.00 per month

  • Qc Technician

    7 months ago

    Kulai, Malaysia SIK COLOR (M) SDN BHD Full time

    1.making sure that measuring and testing equipment are set up and working correctly 2.checking that production methods meet relevant legislation 3 Able to rotate shift and working night shift. 4.Maintain all documentation for the purpose of auditing 5 Record test results as required **Salary**: RM1,500.00 - RM2,000.00 per month Ability to...

  • IT Technical Support

    7 months ago

    Kulai, Malaysia Timesconsult Sdn Bhd Full time

    **Roles and Responsibilities**: - Serving as the first point of contact for IT support within the organization. - Installing, configuring, and maintaining software and hardware components of computer and network systems. - Diagnosing and troubleshooting software and hardware issues. - Repairing and replacing damaged computers and network components. -...

  • Maintenance Supervisor

    1 week ago

    Kulai, Malaysia GUANG HENG PLASTIC INDUSTIES SDN BHD Full time

    To determine production machineries for preventive maintenance. - To plan preventive maintenance schedule with Sr. Operation Manager and follow up all preventive maintenance and machine breakdown activities. - To ensure that preventive maintenance schedules (mechanical and/or electrical works) are carried out as planned through collaboration with Production...