Process Technician

7 months ago


Pasir Gudang, Malaysia Masimo Full time

**Job Summary**:
The Process Engineering Technician is responsible for performing assigned technical tasks, assist with process development and generation of visual instructions and procedures, completes assigned duties on time, follows document procedures, and maintains compliance.

**Duties & Responsibilities**:

- Create manufacturing documentation required to support manufacturing, testing, and production operations.
- Create simple tools, fixtures, and jigs to support production operations.
- Assist Process Engineers with various tasks necessary to support daily manufacturing operations.
- Initiate troubleshooting, root cause analysis and identifying effective solutions to production problems or NPI projects.
- Coordinate communication to Production Operators or Process Engineers on root causes analysis and findings.
- Assist Process Engineers in executing Continuous Improvement activity - Yield, Cycle Time improvement etc.
- Assist to Quote and Request P.O. for New Equipment’s, Fixtures and Tools.
- Supports investigation of non-conforming materials.
- Support and perform validation activities (IQ, OQ and PQ) lead by Process Engineers.
- Support and perform continuous verification of manufacturing equipment, to make sure equipment is in good working conditions and maintain its validated state.
- Perform any other reasonable duties/task assigned by Supervisor/Superior.

**Minimum & Preferred Qualifications and Experience**:
**Minimum Qualifications**:

- 1 years of experience in Production Sustaining and/or New Product Introduction Projects.
- Demonstrated skills in basic electronics and/or mechanical design aptitude.
- Ability to communicate in Malay (written and oral) and basic English (written and oral).
- Ability to perform basic data analysis.

**Preferred Qualifications**:

- Experience in high volume manufacturing environment.
- Experience with optical / electro-mechanical assembly and testing.
- Electronic and mechanical equipment troubleshooting skills.
- Experience with CAD software.
- Knowledge on ISO-13485.
- General knowledge in Lean Manufacturing; SPC techniques, QC tools etc.

**Education**:
Certificate/Diploma in Mechanical, Mechatronics, Manufacturing, Electrical or Electronics or higher.

Physical requirements/Work Environment
This position primarily works in a production environment. It is requiring frequent sitting, standing and walking. Daily use of a computer and other computing and digital devices is required.

The physical demands of the position described herein are essential functions of the job and employees must be able to successfully perform these tasks for extended periods. Reasonable accommodations may be made for those individuals with real or perceived disabilities to perform the essential functions of the job described.

Masimo is an Equal Opportunity Employer, We encourage Minorities, Females, Disabled, and Veterans to apply.


  • Process Technician

    7 months ago


    Pasir Gudang, Malaysia IOT MANUFACTURING SDN BHD Full time

    **Job Scopes,** - Program, troubleshoot & maintain manufacturing process equipment (AOI/SPI) as required as referenced in the summary section. - Monitor and maintains AOI/SPI equipments to acceptable standards while conforming to customer/IPC requirements. - Initiate process improvements through effective evaluations of test/yield data and manufacturing...

  • Process Technician

    7 months ago


    Pasir Gudang, Malaysia Western Digital Full time

    **Company Description** At Western Digital, our vision is to power global innovation and push the boundaries of technology to make what you thought was once impossible, possible. At our core, Western Digital is a company of problem solvers. People achieve extraordinary things given the right technology. For decades, we’ve been doing just that. Our...

  • Process Technician

    6 months ago


    Pasir Gudang, Malaysia Western Digital Full time

    **Company Description** At Western Digital, our vision is to power global innovation and push the boundaries of technology to make what you thought was once impossible, possible. At our core, Western Digital is a company of problem solvers. People achieve extraordinary things given the right technology. For decades, we’ve been doing just that. Our...

  • Facilities Technician

    6 months ago


    Pasir Gudang, Malaysia IOT MANUFACTURING SDN BHD Full time

    Responsible for repairing and maintaining the Mechanical and Electrical conditions of all facilities, machines, operational equipment and safety equipment by keeping a routine servicing schedule. - Responsible for maintaining the conditions and safekeeping of tools and equipment required for maintenance / servicing. - To troubleshoot, repair and maintain...

  • Facilities Technician

    6 months ago


    Pasir Gudang, Malaysia IOT MANUFACTURING SDN BHD Full time

    Responsible for repairing and maintaining the Mechanical and Electrical conditions of all facilities, machines, operational equipment and safety equipment by keeping a routine servicing schedule. - Responsible for maintaining the conditions and safekeeping of tools and equipment required for maintenance / servicing. - To troubleshoot, repair and maintain...

  • Facilities Technician

    7 months ago


    Pasir Gudang, Malaysia IOT MANUFACTURING SDN BHD Full time

    Responsible for repairing and maintaining the Mechanical and Electrical conditions of all facilities, machines, operational equipment and safety equipment by keeping a routine servicing schedule. - Responsible for maintaining the conditions and safekeeping of tools and equipment required for maintenance / servicing. - Familiar with maintenance of Air...

  • Maintenance Technician

    6 months ago


    Pasir Gudang, Malaysia Advanced Assembly Materials (M) Sdn Bhd Full time

    **Responsibilities** 1. Set up new product including plating tool installation and machine parameters setting. 2. Set up machine preparation and process according to work order. 3. Troubleshooting for defect or line abnormality. 4. Fix and maintain stability on all production including machine or process in manufacturing. 5. Perform routine chemical...

  • Hydraulics Technician

    7 months ago


    Pasir Gudang, Malaysia Fluiconnecto Malaysia Sdn. Bhd. Full time

    Fluiconnecto Malaysia Sdn Bhd seeks to employ suitably experienced and qualified Hydraulic Technician and Service Technicians with heavy industry knowledge and exposure. **Scope**:Hydraulic and mechanical services **Location**:This position will be based in Pasir Gudang, Malaysia, with the opportunity to work onsite. **Role**:Involved in assembling...

  • Production Technician

    6 months ago


    Pasir Gudang, Malaysia Acetalent Full time

    **Job Summary**: - Operate manufacturing equipment efficiently. - Meet production goals. - Maintain quality and safety standards. **Key Responsibilities**: **Operate Equipment**: - Run and monitor machines. - Inspect and maintain equipment. - Troubleshoot minor issues **Production Tasks**: - Follow SOPs. - Meet production targets. - Assist with setup...

  • Facilities Technician

    6 months ago


    Pasir Gudang, Malaysia IOT MANUFACTURING SDN BHD Full time

    Responsible for repairing and maintaining the Mechanical and Electrical conditions of all facilities, machines, operational equipment and safety equipment by keeping a routine servicing schedule. - Responsible for maintaining the conditions and safekeeping of tools and equipment required for maintenance / servicing. - Familiar with electrical maintenance...

  • Lab Technician

    6 months ago


    Pasir Gudang, Malaysia PGEO Biotech Sdn Bhd Full time

    Job description 1. To report to Shift Supervisor. 2. To read processing schedules, operating logs, test results of oil samples, and laboratory recommendations to determine changes in equipment controls required to produce specified quantity and quality of product. 3. To move and sets controls, such as knobs, valves, switches, levers, and index arms, on...

  • QA Technician

    6 months ago


    Pasir Gudang, Malaysia Guan Chong Cocoa Manufacturer Sdn Bhd Full time

    **Overview**: Guan Chong Berhad is Asia’s largest cocoa processing company and our main factory is located at Pasir Gudang, Johor. Our company produce full range of cocoa products, namely Cocoa Liquor (Cocoa Mass), Cocoa Butter, Cocoa Cake and Cocoa Powder and the product are marketed under the “Favorich” brand which mean “High in Flavour" and "Rich...


  • Pasir Gudang, Malaysia Upright Talent Full time

    A leading manufacturer with a global presence is expanding now. With their growing operations, currently looking for an experienced maintenance technician to assist in ensure WWTP operation and maintenance is always in good operating conditions. **JOB REQUIREMENT** - Practical experience in a similar role - Hands on experience in process of WWTP - Able...

  • Quality Technician

    6 months ago


    Pasir Gudang, Malaysia Masimo Full time

    **Job Summary**: Quality Technician responsible for providing technical support for all aspects of quality engineering throughout the product realization process and Quality System. This position will handle multiple projects from product validation, through manufacture and Quality System Requirements. The incumbent provides a key role to ensure product...

  • Incoming Technician

    6 months ago


    Pasir Gudang, Malaysia Masimo Full time

    **Job Summary**: Incoming Technician responsible for providing technical support for all aspects of quality engineering throughout the product realization process and Quality System. This position will handle multiple projects from product validation, through manufacture and Quality System Requirements. The incumbent provides a key role to ensure product...


  • Pasir Gudang, Malaysia Western Digital Full time

    **Company Description** The future. It’s on you. You & Western Digital. We’ve been storing the world’s data for more than 50 years. Once, it was the most important thing we could do for data. Now we’re helping the world capture, preserve, access and transform data in a way only we can. The most game-changing companies, consumers, professionals, and...


  • Pasir Gudang, Malaysia Western Digital Full time

    **Company Description** At Western Digital, our vision is to power global innovation and push the boundaries of technology to make what you thought was once impossible, possible. At our core, Western Digital is a company of problem solvers. People achieve extraordinary things given the right technology. For decades, we’ve been doing just that. Our...


  • Pasir Gudang, Malaysia Western Digital Full time

    **Company Description** At Western Digital, our vision is to power global innovation and push the boundaries of technology to make what you thought was once impossible, possible. At our core, Western Digital is a company of problem solvers. People achieve extraordinary things given the right technology. For decades, we’ve been doing just that. Our...

  • Process Technician

    6 months ago


    Pasir Gudang, Malaysia CCM CHEMICALS SDN BHD Full time

    To operate the Chlor Alkali Plant mainly through computerized plant control system and to maximize plant availability consistently with agreed objectives and full conformance to site SHE, Quality and regulatory standards. - Ensure Notification being raised for every single defect in plant and prioritized its execution. Work very closely with the Shift...

  • Process Technician

    6 months ago


    Pasir Gudang, Malaysia CCM CHEMICALS SDN BHD Full time

    To operate the Chlor Alkali Plant mainly through computerized plant control system and to maximize plant availability consistently with agreed objectives and full conformance to site SHE, Quality and regulatory standards. - Ensure Notification being raised for every single defect in plant and prioritized its execution. Work very closely with the Shift...