![Equator Engineering Sdn Bhd](https://media.trabajo.org/img/noimg.jpg)
Mechanical Commissioning Operator
3 weeks ago
Qualification & Experience
- Minimum of 5 years of experience.
- High School Diploma.
- Experience on commissioning of Combined Cycle Power Projects is desirable but not a pre-requisite for the position.
- Experience with start up of pumps, air and gas compressors, pipe flushing, system lock out.
- Must be familiar with all test equipment and testing methods necessary to perform the basic tests associated with local operaƟon of pumps, compressor, sampling panels, chemical feed pumps,etc.
- Ability to read and interpret drawings.
- Basic Knowledge of electrical systems.
- Proficient in troubleshooting and problem-solving techniques.
- Knowledge of safety guidelines and regulations.
Duties Mechanical
- Assist Mechanical Commissioning Engineer during commissioning of mechanical equipment.
- Perform pre-commissioning checks and inspections to ensure that equipment and systems are properly installed and meet design specifications.
- Conduct lubrication and first fill of lube oils as per specification.
- Coordinate with DCS and Electrical local operator to Perform switching of equipment from one machine to another and isolation of breakers.
- Monitor and record operating data of equipment during start up and commissioning as instructed by lead engineers and Commissioning Manager
- Assist in identifying and troubleshoot any issues or malfunctions that arise during the commissioning process.
- Perform maintenance on equipment in line with vendor recommendations until plant handover to the OWNER.
- Work with and assist vendors during the site pre commissioning and commissioning.
- Participate in commissioning meetings and provide regular progress updates to the r or Commissioning Manager.
**Salary**: RM2,000.00 - RM3,000.00 per month
**Benefits**:
- Health insurance
Ability to commute/relocate:
- Kulim: Reliably commute or planning to relocate before starting work (required)
**Experience**:
- commissioning of Combined Cycle Power Projects: 5 years (required)
-
Mechanical Commissioning Operator
2 weeks ago
Kulim, Kedah, Malaysia Equator Engineering Sdn Bhd Full timeQualification & Experience Minimum of 5 years of experience. High School Diploma. Experience on commissioning of Combined Cycle Power Projects is desirable but not a prerequisite for the position. Experience with start up of pumps, air and gas compressors, pipe flushing, system lock out. Must be familiar with all test equipment and testing methods necessary...
-
Mech Commissioning Operator
3 weeks ago
Kulim, Malaysia Equator Engineering Sdn Bhd Full time**Description: - ** Mechanical Commissioning Technician / Local Operator is required to work as part of the ProjectCommissioning Team who will perform the field operation of the project mechanical/Balance ofPlant systems the 130MW Combined Cycle Gas Turbine In Kulim Hi Tech Park (“Project AURORA”)Malaysia. **Qualification & Experience: - ** - Minimum...
-
Mechanical Operator
2 weeks ago
Kulim, Malaysia Omya Full timeBasic Function Assure the proper operation of plant processing equipment by performing mechanical plant maintenance as directed. **Responsibilities**: - Inspect, troubleshoot and repair all plant mechanical systems as directed by the superior. - Make periodic inspections of plant equipment and report its condition to the supervisor for further...
-
Mechanical Operator
1 week ago
Kulim, Malaysia Omya Full timeBasic Function Assure the proper operation of plant processing equipment by performing mechanical plant maintenance as directed. **Responsibilities**: - Inspect, troubleshoot and repair all plant mechanical systems as directed by the superior. - Make periodic inspections of plant equipment and report its condition to the supervisor for further...
-
Mechanical Operator
2 weeks ago
Kulim, Kedah, Malaysia Omya Full timeBasic FunctionAssure the proper operation of plant processing equipment by performing mechanical plant maintenance as directed.Responsibilities: Inspect, troubleshoot and repair all plant mechanical systems as directed by the superior. Make periodic inspections of plant equipment and report its condition to the supervisor for further evaluation. Regularly...
-
Mechanical Operator
2 weeks ago
Kulim, Kedah, Malaysia Omya Full timeBasic FunctionAssure the proper operation of plant processing equipment by performing mechanical plant maintenance as directed.Responsibilities: Inspect, troubleshoot and repair all plant mechanical systems as directed by the superior. Make periodic inspections of plant equipment and report its condition to the supervisor for further evaluation. Regularly...
-
Dcs Commissioning Operator
3 weeks ago
Kulim, Malaysia Equator Engineering Sdn Bhd Full timeQualification & Experience - Minimum of 5 years of experience. - High School Diploma. - Experience on commissioning and startup operations of Combined Cycle Power Projects is essential. - Must be willing to work shift rotation working. - Ability to read and interpret P & ID and PFD. - Basic knowledge of electrical systems Duties - Control the...
-
Dcs Commissioning Operator
2 weeks ago
Kulim, Kedah, Malaysia Equator Engineering Sdn Bhd Full timeQualification & Experience Minimum of 5 years of experience. High School Diploma. Experience on commissioning and startup operations of Combined Cycle Power Projects is essential. Must be willing to work shift rotation working. Ability to read and interpret P & ID and PFD. Basic knowledge of electrical systemsDuties Control the powergeneration (GT / STG) and...
-
C&i Commissioning Operator Kulim Hi Tech Park
3 weeks ago
Kulim, Malaysia Equator Engineering Sdn Bhd Full time**Job Responsilibites or Duties**: - Commissioning technician shall be capable of performing the following tasks: - Perform pre-commissioning checks and inspections to ensure that equipment and systems are properly installed and meet design specifications. - Conduct functional tests and measurements on equipment to verify their performance and...
-
Electrical Commissioning Operator
3 weeks ago
Kulim, Malaysia Equator Engineering Sdn Bhd Full timeQualification & Experience - Minimum of 5 years of experience. - High School Diploma.Experience on commissioning of Combined Cycle Power Projects is desirable but not a pre-requisite for the position. - Experience with HV & LV cable testing, Switchgear, MCC & Distribution Board testing, HV & LV Motor testing, 110V/220V DC Battery systems is essential. - Must...
-
Electrical Commissioning Operator
2 weeks ago
Kulim, Kedah, Malaysia Equator Engineering Sdn Bhd Full timeQualification & Experience Minimum of 5 years of experience. High School Diploma.Experience on commissioning of Combined Cycle Power Projects is desirable but not a pre-requisite for the position. Experience with HV & LV cable testing, Switchgear, MCC & Distribution Board testing, HV & LV Motor testing, 110V/220V DC Battery systems is essential. Must be...
-
Ptw Commissioning Coordinator Kulim Hi Tech Park
3 weeks ago
Kulim, Malaysia Equator Engineering Sdn Bhd Full time**Description: - ** Commissioning Coordinator - PTW is required to work as part of the Project Commissioning Teamwho will perform the field operation of the project mechanical/Balance of Plant systems the 130MW Combined Cycle Gas Turbine In Kulim Hi Tech Park (“Project AURORA”) Malaysia. **Qualification & Experience: - ** - Minimum 10 years of...
-
Mechanical Technician
3 weeks ago
Kulim, Malaysia Omya Malaysia Sdn Bhd Full timeJob Description: Inspect, troubleshoot and repair all plant mechanical systems as directed by the maintenance manager. - Make periodic inspections of plant equipment and report its condition to the supervisor for further evaluation. - Regularly communicate interdepartmentally on the status of jobs, projected completion time, and the need (if any) for...
-
Electrical Commissioning Operator
3 weeks ago
Kulim, Malaysia Equator Engineering Sdn Bhd Full time**Description: - ** Electrical Commissioning Technician / Local Operator is required to work as part of the Project Commissioning Team who will perform the field checkout of the project electrical systems the 130MW Combined Cycle Gas Turbine In Kulim Hi Tech Park (“Project AURORA”) Malaysia. **Qualification & Experience: - ** - Minimum of 5 years of...
-
Dcs Commissioning Operator Kulim Hi Tech Park
3 weeks ago
Kulim, Malaysia Equator Engineering Sdn Bhd Full time**Description: - ** Commissioning Control Room Operator is required to work as part of the Project Commissioning. Team who will perform plant control room operations during initial startup and shutdown at the 130MW Combined Cycle Gas Turbine In Kulim Hi Tech Park (“Project AURORA”) Malaysia. **Qualification & Experience** - Minimum of 5 years of...
-
Staff Specialist Facility Mechanical
2 weeks ago
Kulim, Malaysia Infineon Technologies Full timeI n your new role you will: R - esponsible for specific mechanical system operation, maintenance, upgrading, and capacity study. R - eview and monitor preventive maintenance carried out for all Mechanical systems S - ystem capacity planning for all Mechanical systems F - ailure Mode and Effects Analysis (FMEA) and 8D failure analysis for all Mechanical...
-
C&i Commissiong Operator
3 weeks ago
Kulim, Malaysia Equator Engineering Sdn Bhd Full timeQUALIFICATIONS & EXPERIENCE - 5-10 years of experience. - High School Diploma.Experience on commissioning of Combined Cycle Power Projects is desirable but not a pre-requisite for the position. - Experience with PLC programming for Water Treatment Plant, HRSG Duct Burner Management, ConƟnuous Emissions Monitoring would be advantageous. - Must be familiar...
-
C&i Commissiong Operator
2 weeks ago
Kulim, Kedah, Malaysia Equator Engineering Sdn Bhd Full timeQUALIFICATIONS & EXPERIENCE 510 years of experience. High School Diploma.Experience on commissioning of Combined Cycle Power Projects is desirable but not a pre-requisite for the position. Experience with PLC programming for Water Treatment Plant, HRSG Duct Burner Management, ConƟnuous Emissions Monitoring would be advantageous. Must be familiar with all...
-
Ptw Commissioning Coordinator
3 weeks ago
Kulim, Malaysia Equator Engineering Sdn Bhd Full timeQualification & Experience - Minimum 10 years of project/construction/commissioning experiences gained in the Oil and Gas industry with relevant experience in managing work permit systems in greenfield construction/commissioning/startup projects. - Minimum requirement of a Diploma or preferably a Degree in electrical engineering or relevant technical...
-
Mechanical Fitter
3 weeks ago
Kulim, Malaysia Technygroup Holding (M) Sdn Bhd Full timeDetermining specifications for components to be created based on blueprints for mechanical systems. Measuring and constructing components out of raw materials through cutting, shaping, and grinding. Assembling fabricated components into a larger machine or system. Complying with operations, safety, and maintenance procedures. Understanding and interpreting...