Steel Slag Main Control Technician

1. To assist the foreman on duty conveyor belt machine to do a good class ingredients production organization and command, be responsible for the technical operation of the central control room, organize the production of this class according to the requirements of the workshop plan. 2. Be responsible for the correct use and inspection of the conveying...

1. Based on the operation area of steel-making converter, according to the time gap of molten steel smelting, the operation time of cleaning the slag at the bottom of the furnace shall not affect the converter production, nor the slag turning and slag cleaning. At the same time, the outstanding operation time of the forklift is particularly important. At the...

1. The work unit focuses on the slag free treatment of steel-making, with a daily production capacity of about 1500 tons, frequent reshipment and heavy workload. The materials are granular and easy to be sprinkled; high temperature and fast reshipment rhythm. 2. The ironmaking plant uses vehicles for gravity ash reshipment. When the ash is discharged, there...

1. Responsible for the recovery of gas, the opening and closing of all valves and equipment such as starting and stopping pressure machine and electric dust remover, and carefully fill in the equipment operation record. 2. Be responsible for the patrol inspection, maintenance and maintenance of gas tank equipment and facilities, as well as the early...

1.BPRT equipment and water pump are the core auxiliary equipment of iron making. Responsible for the operation management and technical guidance to handle different blast furnace conditions. 2.BPRT equipment involved hazardous gas, and are considered high risk work. 3.Positions related are mostly automated, cooperate with blast furnace which involved...

1.Responsible for rolling mill equipment operation, according to the rolling procedure requirements and process parameters, rough rolling control and adjustment of the rolling stock, after the adjusted material type is qualified, it can already enter the finishing mill. 2.Change the rolling mill when changing specifications, adjust the rolling mill, guide...

*This vacancy open for Pellet Workshop and Conveyor Belt Project. *Pellet workshop estimated will start operate on December 2020. *Conveyor belt project estimated will start operate on April 2021. 1. Be familiar and master the technical theory and practical operation skills of electrical work, as well as the equipment performance of each area. 2. Be...

1. Under the leadership of the dispatching Control Senior Manager, according to the operation of the equipment in each capacity and energy-using department, the balance of energy supply and supply of the whole company is guaranteed. 2. Responsible for the scheduling, collection and analysis of the production and consumption information of daily energy media,...

1. Adjust each index according to the control index issued by the temperature measuring worker or the flame adjusting worker, and conduct regular inspection on the gas and waste gas equipment. 2. Exchange on time, and pay attention to whether all kinds of instruments return to normal operation, carefully carry out patrol inspection and find out potential...

1.Responsible for communicating with the feeding controller and blast furnace manager, charge and distribute the material according to the requested order. 2.Command charging technician to prepare raw material according to real time usage and material type. 3.Responsible for preparing the charging order plan according to the blast furnace deputy senior...

1. Do a good job in the trial operation of various equipment before pouring, feed back the problems in time and cooperate with them until they pass the acceptance. 2. Do a good job in spot inspection, use and maintenance of equipment within the post area, fill in relevant records, and cooperate with maintenance workers to do a good job in online equipment...

1) be responsible for normal monitoring (temperature, pressure, displacement, etc.) and switching, stopping and replacing of major equipment such as washing tower, ammonia distillation tower, desulfurization tower, Claus furnace and waste boiler. 2) monitor and adjust the process parameters. Such as temperature, pressure, flow control to ensure gas, ammonia...

1.BPRT equipment and water pump are the core auxiliary equipment of iron making. Responsible for the operation and technical guidance for the water pump system. 2.Water pump under care are high pressure pump, medium pressure pump ,soft water pump, diesel engine, spray pump, BPRT pump ,filter pump which involved complex process. There is 35 water pump, 14 air...

1. Responsible for selecting the corresponding cooling control process according to the rolled specifications and varieties, sorting out the coil head and tail of the air-cooled line in production, and ensuring the smooth entry of finished products into the collection device. 2. Confirm the air volume of the fan, the number of openings and the number of...

1. Understand the production status and production pace, responsible for communication with other department, to ensure smooth production, and give feedback on production information. 2. Responsible for the statistical reporting of various records and production scheduling logs on duty, investigate and analyze the production problems on duty, and give...

1 Responsible for palletizing equipment operation, palletizing according to production standards, monitoring palletizing equipment status, handling abnormal shutdown faults, performing inspection and maintenance work on palletizing equipment, adjusting palletizing speed according to production rhythm. 2 responsible for palletizing during maintenance The...

1. Responsible for checking the acceptance and quality inspection of various scrap. 2. Responsible for the supply, coordination and transportation of various scrap in the workshop. 3. Master the amount of scrap steel and the amount of scrap, timely sort the qualified scraps, and strengthen the transfer and management of scrap. Alliance Steel (M) Sdn Bhd...

1. Responsible for spot inspection and maintenance of rod mill and associated equipment, analysis, judgment and solution of equipment faults. 2. Operate according to the operating rules of the post and the equipment start-stop procedure to avoid equipment damage caused by misoperation. 3. Responsible for the strict control of rod grinding production results...

1. Responsible for the assembly and on-line installation of the roller box. strictly implement the technical requirements for the assembly of the roller box, and make the assembly records. 2. Responsible for timely handling of equipment failures in daily production to ensure smooth production. 2. Responsible for timely handling of equipment failures in daily...

1.Responsible for the daily routine work of labority team. 2. Test iron ore, coal coke and other raw materials strictly in accordance with cnas-cl01 standards and other CNAS standards and operating instructions. 3. Responsible for the normal maintenance and maintenance of laboratory instruments and equipment, check the operation of instruments and equipment...