Squad Leader of Double Beam Crane Technician

1. Responsible for lifting, unloading and loading scrap, and providing stable scrap supply for steelmaking production. 2. Regularly maintain the vehicle, timely find and deal with equipment faults. 3. Train local staff for operation. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and officially commissioned in June 2019, it is the largest steel...

1. Under the Senior Manager Oxygen Making Plant be responsible for the administrative and production management of the team, fully mobilize the production enthusiasm of the team members, do a good job in production; supervise and inspect the work of each position; earnestly implement the post responsibility system and process indicators, use and maintain...

1. Under the leadership of the workshop Manager r, responsible for the administrative and production management of the team, fully mobilize the production enthusiasm of the team members, do a good job in production; supervise and inspect the work of each position; earnestly implement the post responsibility system and process indicators, use and maintain the...

1. Accept the instructions and instructions of the squad leader, implement various standards such as driving inspection standards and operating standards, and complete the production tasks assigned by the squad leader. 2. Cooperate with the completion of maintenance, maintenance, lubrication and other work, train new employees to operate skills, meet the...

Operates traveling or stationary overhead crane to lift, move, and position loads, such as machinery, equipment, products, and solid or bulk materials, using hoisting attachments, such as hook, sling, electromagnet, or bucket: Observes load hookup and determines safety of load. -Manipulates or depresses crane controls, such as pedals, levers, and buttons, to...

1. Have good knowledge about the operating rules and machinery structure of the crane,able to immediately solve any sudden event to ensure safe production. 2.Crane operation is considered special equpment and need to works at heights. Therefore this position require special permit to operate. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and...

1. Responsible for the operation, inspection, maintenance of the belt, do a good job of inspection records, strictly monitor the belt, and closely contact with the upper and lower procedures, fill in and save the original records of production and equipment as required. 2. According to the requirements of the post inspection, do a good job of inspection and...

1. Responsible for the execution of pass drawing and turning standards, processing of various types, making sure that the drawing, sample and pass conform to the requirements of the drawing, as well as the turning deviation and surface roughness. 2. Responsible for the processing tasks assigned by the section, set up the ledger, and managed it in an orderly...

1. Assist superior in matters of personnel management, attendance and performance assessment of the department. 2.Responsible for the arrangement and supervision of production and other task assigned by superior and the labour discipline of staff. 3.Responsible for the daily translation to ensure effective communication between staff of different...

1.Responsible for organizing worker to heat the stove and provide the required wind temperature for the blast furnace, to create the optimum conditions to reduce energy consumption. 2.Responsible for adjusting gas consumption, reduce gas consumption, and ensure safe operation of the gas system. 3.Cooperate with the squad leader to train reserve...

1. Obey superior leaders, check and confirm and prepare necessary tools and materials for production (hydraulic cylinder, hydraulic tubing, large and medium package covering agent, drainage tube, temperature measuring tube, temperature measuring gun, etc.). 2. Command the crane to land the big bag on the big bag turntable smoothly, measure the temperature of...

1. Accept the work instruction and command of the section leader on duty, repair the mechanical failure of the vehicle, carry out spot inspection, maintenance, maintenance and lubrication for the big car, small car, winch, pulley, reducer, coupling, brake, chain switch, bearing and bearing bush, and establish maintenance ledger. 2. Deal with temporary...

1. Responsible for the inspection, switch, shutdown, maintenance and emergency stop accident handling of the main exhaust fan. Responsible for close contact with the central control room, timely switch the damper to adjust the air volume. Carefully fill in and save the original records of production and equipment. 2. According to the requirements of the post...

1. Responsible for inspection and maintenance of electric precipitators and induced draft fans, electric dust removal and ash discharge work, and found problems with the dust removal system, and contact the central control room in time. Responsible for checking the operation of the equipment, filling in and preserving the original records of production and...

1. Responsible for the installation, repair and maintenance of high and low voltage lines, motors and electrical equipment 2. Responsible for the maintenance of all PLCs. 3. Responsible for the design and installation of electrical circuit and maintenance of all electrical equipment in operation. 1. Be responsible for the operation of the belt cooler and...

1. Be responsible for the inspection and maintenance of all dust removal equipment and induced draft fans in the feeding area. If problems are found in the dust removal system, the equipment shall be operated and inspected for maintenance such as start-up, shutdown, air supply, ventilation, etc., and shall carefully make records to check the operation of the...

1. Responsible for the sorting, shovel, and furnace rolling of the billet in the responsible on-site workshop area. 2. Responsible for the organization and planning of the site in the responsible on-site workshop area. 3. In conjunction with the steel-making Testing station, the rolling mill must be meticulous, and the production should be carried out...

1. Master the basic operation of the measurement squad leader of the “unattended” weighing system. The “unmanned” weighing system is a Chinese-led system developed by CCID for the informationization of the United Steel Group. 2. Familiar with the specifications, models and types of finished materials, semi-finished products and related by-products,...

1. Assist the manager of production control in production especially converter workshop. Organize the production of the converter, and work hard to fully complete the production tasks. 2. Responsible for working with the company's general production control technician and the iron making plant production control technician, keeping abreast of the molten iron...

1.Strictly implement the technical specifications. The quality and quantity are steel, iron and oxygen, and nitrogen. At the same time, a certain amount of liquid oxygen, liquid nitrogen and liquid argon are produced to achieve high quality, high yield and low consumption. 2.Responsible for monitoring the changes of temperature, pressure, resistance, liquid...