PROCESS TECHNICIAN – Fresh graduates

1 week ago

Pasir Gudang, Johor, Malaysia Masimo. Full time 30,000 - 60,000 per year

Job Summary:

The Process Engineering Technician is responsible for performing assigned technical tasks, assist with process development and generation of visual instructions and procedures, completes assigned duties on time, follows document procedures, and maintains compliance.

Duties & Responsibilities:

  • Create manufacturing documentation required to support manufacturing, testing, and production operations.
  • Create simple tools, fixtures, and jigs to support production operations.
  • Assist Process Engineers with various tasks necessary to support daily manufacturing operations.
  • Initiate troubleshooting, root cause analysis and identifying effective solutions to production problems or NPI projects.
  • Coordinate communication to Production Operators or Process Engineers on root causes analysis and findings.
  • Assist Process Engineers in executing Continuous Improvement activity - Yield, Cycle Time improvement etc.
  • Assist to Quote and Request P.O. for New Equipment's, Fixtures and Tools
  • Supports investigation of non-conforming materials.
  • Support and perform validation activities (IQ, OQ and PQ) lead by Process Engineers.
  • Support and perform continuous verification of manufacturing equipment, to make sure equipment is in good working conditions and maintain its validated state.
  • Perform any other reasonable duties/task assigned by Supervisor/Superior.

Minimum & Preferred Qualifications and Experience:

Minimum Qualifications:

  • 1 years of experience in Production Sustaining and/or New Product Introduction Projects.
  • Demonstrated skills in basic electronics and/or mechanical design aptitude.
  • Ability to communicate in Malay (written and oral) and basic English (written and oral).
  • Ability to perform basic data analysis.

    Preferred Qualifications:
  • Experience in high volume manufacturing environment.
  • Experience with optical / electro-mechanical assembly and testing.
  • Electronic and mechanical equipment troubleshooting skills.
  • Experience with CAD software.
  • Knowledge on ISO-13485.
  • General knowledge in Lean Manufacturing; SPC techniques, QC tools etc.

Education:

  • Certificate/Diploma in Mechanical, Mechatronics, Manufacturing, Electrical or Electronics or higher.

Physical requirements/Work Environment

This position primarily works in a production environment. It is requiring frequent sitting, standing and walking. Daily use of a computer and other computing and digital devices is required.

The physical demands of the position described herein are essential functions of the job and employees must be able to successfully perform these tasks for extended periods. Reasonable accommodations may be made for those individuals with real or perceived disabilities to perform the essential functions of the job described.

Masimo is an Equal Opportunity Employer, we encourage Minorities, Females, Disabled, and Veterans to apply.

  • Process Technician

    6 days ago

    Pasir Gudang, Johor, Malaysia Ferrotec Power Semiconductor Full time

    Job Scope:Monitor daily process status and machine conditions.Check and record process parameters; assess how parameter changes affect product quality.Assist in trials for new products and new processes.Perform sample preparation, testing, data collection, and report abnormal findings promptly.Support production teams with process-related issues and...

  • process technician

    6 hours ago

    Pasir Gudang, Johor, Malaysia 5E Resources Sdn. Bhd. Full time

    Carry daily operation checklist.perform targeted daily productivity as assigned by engineer or superiors.Report nonconformity condition to engineer or superiors (When any abnormality be encountered during daily operation)responsible for ensuring that the wastewater treatment plant complies with all applicable environmental regulations and safety...

  • Process Technician

    1 week ago

    Pasir Gudang, Johor, Malaysia Masimo Full time

    Job SummaryJOB DESCRIPTIONThe Process Technician is responsible for performing assigned technical tasks, assist with process development and generation of visual instructions and procedures, completes assigned duties on time, follows document procedures, and maintains compliance.Duties & ResponsibilitiesCreate manufacturing documentation required to support...

  • Process Technician

    2 weeks ago

    Pasir Gudang, Johor, Malaysia Masimo Full time $30,000 - $60,000 per year

    DescriptionJob Summary:  ​​​​The Process Technician is responsible for performing assigned technical tasks, assist with process development and generation of visual instructions and procedures, completes assigned duties on time, follows document procedures, and maintains compliance. ​​​   Duties & Responsibilities: ​​Create...

  • Maintenance Technician

    2 weeks ago

    Pasir Gudang, Johor, Malaysia INNOValues Precision Sdn Bhd Full time 12,000 - 30,000 per year

    Job Description:Provide technical support to the Supervisor / EngineerPerform Machine MaintenancePerform Preventive Maintenance for machine or equipmentAssist production on setting up new parts & improvement on maintenance issues.Ensure housekeeping and safety procedures are adhered at all timesRequirementMinimum 2 years' experience as Maintenance...

  • Process Engineer

    1 week ago

    Pasir Gudang, Johor, Malaysia Agensi Pekerjaan GMRecruitment Sdn Bhd Full time

    Monitor and analyse production processes, evaluating how parameter adjustments affect product quality and ensuring optimal process control.Lead new product and process development from concept to full-scale implementation.Review, improve, and document existing processes, developing and maintaining Standard Operating Procedures (SOPs) in line with company...

  • Mechanist (Fresh Graduate encouraged) | Pasir Gudang

    1 week ago

    Pasir Gudang, Johor, Malaysia Hirehub Management Full time 20,000 - 40,000 per year

    Key ResponsibilitiesSet up and operate CNC machines (e.g., CNC milling, turning, drilling).Operate manual machines such as lathes, grinders, and milling machines.Load raw materials, adjust machine parameters, and monitor machining processes.Read and interpret engineering drawings, blueprints, and CAD models.Select appropriate tooling, fixtures, and...

  • Production Technician

    2 weeks ago

    Pasir Gudang, Johor, Malaysia Acetalent Group Full time 12,000 - 28,800 per year

    Production Setup & Operation: Prepare and operate production equipment according to job orders, utilizing appropriate tooling, materials, andsetting parameters.Process Monitoring & Adjustment: MMonitor production processes, make necessary adjustments to machine parameters, and report issues to engineersor managers.Preventive Maintenance: Perform routine...

  • Production Technician

    2 weeks ago

    Pasir Gudang, Johor, Malaysia Acetalent Group Full time

    Production Setup & Operation: Prepare and operate production equipment according to job orders, utilizing appropriate tooling, materials, andsetting parameters.Process Monitoring & Adjustment: MMonitor production processes, make necessary adjustments to machine parameters, and report issues to engineersor managers.Preventive Maintenance: Perform routine...

  • Research And Development Technician

    2 weeks ago

    Pasir Gudang, Johor, Malaysia Unigrà APAC Full time 40,000 - 60,000 per year

    Job DescriptionPrototypes development in the laboratory to achieve all goals in team or in autonomy with minimal supervision.Report all the test and development processes and resultsGood documentations, able to perform journals research and assist superior on development.Be responsible for making sure the sample, equipment, and any raw materials are handled...