Maintenance Technician of Coke Oven Furnace Door

1. Complete the coke pushing, coal leveling and production plan of the shift, and convey the production instructions issued by the working section. 2. Clean the furnace door and furnace door frame of the shift, and assist the furnace door station to replace the problematic furnace door. 3. Deal with the remaining coal and coke of the shift, and assist the...

1. Obey the shift leader's management to complete the planned task on duty. 2. Carefully implement the safety operation procedures of the post, complete the coke receiving and quenching tasks on duty, and be familiar with the special operation and accident handling methods of the post. 3. Understand the equipment performance, structure and principle of the...

1. Familiar with and master the operating procedures and safety operating procedures of this post and implement them carefully. 2. Assist the driver to pick up the furnace door and stand at the designated position. 3. Complete the furnace door, furnace frame cleaning, tail coke cleaning, and the treatment of tar and debris in the bottom grinding plate, knife...

1. Assist the on duty section chief to organize the production personnel of each post to work orderly. 2. Check the work quality of each post and organize the staff to deal with the hidden dangers of each post in time, and take effective measures to ensure the safety production of the team. 3. Be familiar with the operation technology skills of the coal and...

1.Responsible for communicating with the feeding controller and blast furnace manager, charge and distribute the material according to the requested order. 2.Command charging technician to prepare raw material according to real time usage and material type. 3.Responsible for preparing the charging order plan according to the blast furnace deputy senior...

1. Under the leadership of the deputy director, do a good job in the spot check of equipment in the workshop, and take direct management responsibility for the impact of equipment accidents on production due to the spot check not in place. 2. Reasonably arrange spot inspection and maintenance according to the tasks assigned by the deputy director of the...

1.Responsible for organizing worker to heat the stove and provide the required wind temperature for the blast furnace, to create the optimum conditions to reduce energy consumption. 2.Responsible for adjusting gas consumption, reduce gas consumption, and ensure safe operation of the gas system. 3.Cooperate with the squad leader to train reserve...

1.Responsible for checking the operational status of the equipment, lubricate and tighten when neede, to ensure the safe operation of the equipment. 2.Responsible for preparing material according to the type and characteristic of the material. 3.Do a good job on site and fixed placement work.Alliance Steel (M)Sdn Bhd (ASSB) was established in 2014 and...

1) Registered with IKM1. 2)Test iron ore, coal coke and other raw materials strictly in accordance with cnas-cl01 standards and other CNAS standards and operating instructions; 3) Responsible for the normal maintenance and maintenance of laboratory instruments and equipment, check the operation of instruments and equipment according to regulations, and do a...

1.Responsible for the installation, commissioning, technical transformation, repair and maintenance of high and low voltage distribution circuits and electrical equipment in various workshops. 2.Must have good knowledge of the blast furnace production process and be able to understand the usage, structure, principle, performance and operational maintenance...

1.Responsible for checking the working condition of the bag to ensure that the gas dust content is 5mg/m3. 2.Responsible for adjusting the gas release pressure regularly to ensure safe operation of gas pipeline network. 3.Responsible for conducting point check for the operation of the bag filter and replace the damaged bag in time.Alliance Steel (M)Sdn Bhd...

1. Responsible for the normal monitoring (temperature, pressure, displacement, etc.) and switching, stopping and replacing of gas fans, primary coolers and other major equipment. 2. Monitor and adjust the process parameters. Such as the control of temperature, pressure and flow to ensure the quality of gas. 3. Responsible for on-site monitoring of regional...

1. Conscientiously implement the management requirements of the workshop and the safety operation of the post, and organize the coordination of the personnel of each post; 2. Understand the production status, adjust the production frequency in time, ensure the production is stable and the quality is qualified, and be able to complete the production plan on...

1) Follow up the sludge pressure in the sedimentation tank to ensure the effluent turbidity is qualified. 2) Be responsible for the preparation of chemicals. 3) Be responsible for the central monitoring of regional hot work, safety and environmental protection to ensure safe production.Alliance Steel (M)Sdn Bhd (ASSB) was established in 2014 and officially...

1. Proficient in general mechanical equipment and production technology, technical control of newly added equipment technical transformation projects, technical transformation of equipment failure points, and be prepared to work during holidays. Be familiar with mechanical drawings, be proficient in CAD, and related office software. 2. Responsible for the...

1. Through the vibrating screen operation, the material is screened to ensure that the screened lump ore is free of powder and meets the requirements of blast furnace. The screening effect is observed to ensure uniform feeding, smooth feeding and prevention of material blockage at the blanking port. 2. Do an inspection and routine check on the post...

1. Assist the manager of production control in production especially converter workshop. Organize the production of the converter, and work hard to fully complete the production tasks. 2. Responsible for working with the company's general production control technician and the iron making plant production control technician, keeping abreast of the molten iron...

1.BPRT equipment and water pump are the core auxiliary equipment of iron making. Responsible for the operation management and technical guidance to handle different blast furnace conditions. 2.BPRT equipment involved hazardous gas, and are considered high risk work. 3.Positions related are mostly automated, cooperate with blast furnace which involved...

1. Responsible for the operation, inspection, maintenance of the belt, do a good job of inspection records, strictly monitor the belt, and closely contact with the upper and lower procedures, fill in and save the original records of production and equipment as required. 2. According to the requirements of the post inspection, do a good job of inspection and...

1. Responsible for the recovery of gas, the opening and closing of all valves and equipment such as starting and stopping pressure machine and electric dust remover, and carefully fill in the equipment operation record. 2. Be responsible for the patrol inspection, maintenance and maintenance of gas tank equipment and facilities, as well as the early...