Current jobs related to Charging Technician, Blast Furnace Workshop - Kuantan, Pahang - ALLIANCE STEEL (M) SDN BHD

  • Central Controller Translator, Blast Furnace

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1.Responsible for communicating with the feeding controller and blast furnace manager, charge and distribute the material according to the requested order. 2.Command charging technician to prepare raw material according to real time usage and material type. 3.Responsible for preparing the charging order plan according to the blast furnace deputy senior...

  • Charging Technician, Blast Furnace Workshop

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1.Responsible for checking the operational status of the equipment, lubricate and tighten when neede, to ensure the safe operation of the equipment. 2.Responsible for preparing material according to the type and characteristic of the material. 3.Do a good job on site and fixed placement work. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and...

  • Pre-furnace Technician, Blast Furnace Workshop

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1.Responsible for the end point and behind furnace sampling, sample delivery, and sample report work. 2.Responsible for the temperature measurement at the end point and behind the furnace. 3.Responsible for the slag blocking and slag pressing work in the tapping process. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and officially commissioned in...

  • Hot Stove Technician, Blast Furnace Workshop, Iron

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1.Responsible for organizing worker to heat the stove and provide the required wind temperature for the blast furnace, to create the optimum conditions to reduce energy consumption. 2.Responsible for adjusting gas consumption, reduce gas consumption, and ensure safe operation of the gas system. 3.Cooperate with the squad leader to train reserve...

  • Dry Dedusting Technician, Blast Furnace Workshop

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1.Responsible for checking the working condition of the bag to ensure that the gas dust content is 5mg/m3. 2.Responsible for adjusting the gas release pressure regularly to ensure safe operation of gas pipeline network. 3.Responsible for conducting point check for the operation of the bag filter and replace the damaged bag in time. Alliance Steel (M) Sdn Bhd...

  • Coal Injection Technician, Pci Workshop

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Have to understand function of pulverized coal injection equipment familliar with pulverized coal injection equipment operation. 2. Ensure coal injection to the blast furnace is balanced, stable and sufficient. 3. When there are changes in the blast furnace coal requirement must be able to calculate the injection rate per minute,per 10 minute and per half...

  • Coking Plant Furnace Lid Operator

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. According to the production close the fan ban,open the rising pipe cover ,and open the coal charging hole cover to dry the furnace. 2.Open the high pressure ammonia. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and officially commissioned in June 2019, it is the largest steel manufacturer in Malaysia in terms of output capacity and range of...

  • Maintenance Technician of Coke Oven Furnace Door

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Be responsible for the maintenance and repair of the furnace door of the post, master the equipment principle, operation process, safety precautions of the post, and understand the maintenance methods and technical requirements of the furnace door. 2. Be familiar with the functions and basic requirements of coke oven door accessories. 3. The special...

  • Electrical Technician

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1.Responsible for the installation, commissioning, technical transformation, repair and maintenance of high and low voltage distribution circuits and electrical equipment in various workshops. 2.Must have good knowledge of the blast furnace production process and be able to understand the usage, structure, principle, performance and operational maintenance...

  • Pellet Making Technician, Pellet Workshop

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    *This vacancy open for Pellet Workshop and Conveyor Belt Project. *Pellet workshop estimated will start operate on December 2020. *Conveyor belt project estimated will start operate on April 2021. 1. Master the performance and working principle of the equipment in this position, and be responsible for the start-stop operation and maintenance of the disc...

  • Coal Charging Car Operator, Coking Plant

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Assist the shift leader in charge of the coal loading operation and furnace top area management of the shift. 2. Strictly implement the safety regulations and technical regulations of the post, and constantly improve the awareness of safety production. 3. Maintain and maintain the equipment of the post, keep the equipment of the post clean, and be...

  • Alloy Technician, Converter Workshop

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Be responsible for timely and accurate weighing of alloy materials, and participate in terminal sampling, temperature measurement, argon blowing operation and ladle insulation operation. 2. Responsible for deoxidation and alloying operations in the process of steel drawing, and determined the alloy yield. 3. Communicate with the furnace chief frequently...

  • Steel Slag Main Control Technician

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Assist the manager of production control in production especially converter workshop. Organize the production of the converter, and work hard to fully complete the production tasks. 2. Responsible for working with the company's general production control technician and the iron making plant production control technician, keeping abreast of the molten iron...

  • Technician of Lime Kiln Furnace Body, Lime Kiln

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Responsible for the handling of gas operation and process accident handling. 2. Check the furnace operation, check the lime roasting situation. 3. Handling of emergency accidents during equipment work and production. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and officially commissioned in June 2019, it is the largest steel manufacturer in...

  • Water Pump Operation Technician

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Be responsible for the loading and batching of the heating furnace, and ensure the correct operation according to the technical operation rules and the requirements of the steel feed card, so as to eliminate the occurrence of the accident of the stuck wall, stuck pipe and billet arch and turn over the furnace. 2, strictly implement the "heating furnace...

  • Bprt Main Operation Technician

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1.BPRT equipment and water pump are the core auxiliary equipment of iron making. Responsible for the operation management and technical guidance to handle different blast furnace conditions. 2.BPRT equipment involved hazardous gas, and are considered high risk work. 3.Positions related are mostly automated, cooperate with blast furnace which involved...

  • Technician, Laboratory Workshop, Coking

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Responsible for the installation, repair and maintenance of high and low voltage lines, motors and electrical equipment 2. Responsible for the maintenance of all PLCs. 3. Responsible for the design and installation of electrical circuit and maintenance of all electrical equipment in operation. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and...

  • Scrap Technician

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Responsible for checking the acceptance and quality inspection of various scrap. 2. Responsible for the supply, coordination and transportation of various scrap in the workshop. 3. Master the amount of scrap steel and the amount of scrap, timely sort the qualified scraps, and strengthen the transfer and management of scrap. Alliance Steel (M) Sdn Bhd...

  • Crusher Technician, Sintering Workshop

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1, responsible for organizing the sintering section materials, personnel, equipment, technology and other elements, to complete the task of production; 2, responsible for good production contact, ensure the sintering production with raw fuel, air, water, electricity, gas supply, etc. In case of emergencies or dangerous operations, the personnel shall be in...

  • Coking Plant Coke Pusher Machine Technician

    4 months ago

    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Complete the coke pushing, coal leveling and production plan of the shift, and convey the production instructions issued by the working section. 2. Clean the furnace door and furnace door frame of the shift, and assist the furnace door station to replace the problematic furnace door. 3. Deal with the remaining coal and coke of the shift, and assist the...

Charging Technician, Blast Furnace Workshop

3 months ago

Kuantan, Pahang, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

1.Responsible for checking the operational status of the equipment, lubricate and tighten when neede, to ensure the safe operation of the equipment.

2.Responsible for preparing material according to the type and characteristic of the material. 3.Do a good job on site and fixed placement work.
Alliance Steel (M)


Sdn Bhd (ASSB) was established in 2014 and officially commissioned in June 2019, it is the largest steel manufacturer in Malaysia in terms of output capacity and range of products.

ASSB sets to produce 3.5MT of wire coil, rod, and H-beam per year.

ASSB is located in Malaysia-China Kuantan Industrial Park (MCKIP), strategically next to the East Coast Expressway that stretches from Terengganu to Kuala Lumpur.

It is also strategically next to Kuantan Port, which now facilitated with the Deep Water Terminal that ease global waterway transportation.

Aiming to be the exemplar in Malaysian steel industry, ASSB adopting green initiatives in its blast furnace ironmaking and converter steelmaking, apart from focusing on reuse, reduce, and recycle in production process.

Strive to be the most competitive steel manufacturer in Malaysia as well as the ASEAN region, ASSB is certified with the ISO9001:2015 QMS Certification and has its wide products range recognized and certified in various markets and regions.

Diploma / Advanced Diploma / Higher Graduate Diploma / DVM / DKM Level 4 / DLKM Level 5