Coal Injection Technician, Pci Workshop

1. Have to understand function of pulverized coal injection equipment familliar with pulverized coal injection equipment operation. 2. Ensure coal injection to the blast furnace is balanced, stable and sufficient. 3. When there are changes in the blast furnace coal requirement must be able to calculate the injection rate per minute,per 10 minute and per half...

1. Be responsible for the management of coal blending scheme implementation, and take full responsibility for quality accidents caused by poor implementation. 2. Be responsible for contacting the coal distribution workers, loading and filling the coal according to the sequence required for coal blending, and recording and filing. 3. Be familiar with coal...

1. Have to understand function of dust production equipment, familliar with dust prodution equipment operation, ensure dust production runs smoothly and normal production. 2. Must know how to inspect equipment, must be able to repair and solve when encounter equipment problem. 3. When doing dust production must be according to the coal water content, adjust...

1. Be fully responsible for the management of receiving raw materials to the coal bunker, and take direct responsibility for the mixed coal bunker or the wrong bunker. 2. Be familiar with the internal index and appearance quality of the required filling coal, and ensure that the safe position meets the coal blending production demand. 3. Ensure the safe...

1. Complete the coke pushing, coal leveling and production plan of the shift, and convey the production instructions issued by the working section. 2. Clean the furnace door and furnace door frame of the shift, and assist the furnace door station to replace the problematic furnace door. 3. Deal with the remaining coal and coke of the shift, and assist the...

*This vacancy open for Pellet Workshop and Conveyor Belt Project. *Pellet workshop estimated will start operate on December 2020. *Conveyor belt project estimated will start operate on April 2021. 1. Master the performance and working principle of the equipment in this position, and be responsible for the start-stop operation and maintenance of the disc...

Electrical engineering technicians work together with electrical engineers in electrical engineering reasearch. They perform technical tasks and aid in the designing, testing, manufacturing and operation of electrical devices and facilities. Our service cantre is fully equiped to assist and facilitate all works. This gives us the edge to superseed other...

1. Assist the manager of production control in production especially converter workshop. Organize the production of the converter, and work hard to fully complete the production tasks. 2. Responsible for working with the company's general production control technician and the iron making plant production control technician, keeping abreast of the molten iron...

1.Responsible for the daily routine work of labority team. 2. Test iron ore, coal coke and other raw materials strictly in accordance with cnas-cl01 standards and other CNAS standards and operating instructions. 3. Responsible for the normal maintenance and maintenance of laboratory instruments and equipment, check the operation of instruments and equipment...

1. Responsible for the installation, repair and maintenance of high and low voltage lines, motors and electrical equipment 2. Responsible for the maintenance of all PLCs. 3. Responsible for the design and installation of electrical circuit and maintenance of all electrical equipment in operation. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and...

1, responsible for organizing the sintering section materials, personnel, equipment, technology and other elements, to complete the task of production; 2, responsible for good production contact, ensure the sintering production with raw fuel, air, water, electricity, gas supply, etc. In case of emergencies or dangerous operations, the personnel shall be in...

1. Be responsible for timely and accurate weighing of alloy materials, and participate in terminal sampling, temperature measurement, argon blowing operation and ladle insulation operation. 2. Responsible for deoxidation and alloying operations in the process of steel drawing, and determined the alloy yield. 3. Communicate with the furnace chief frequently...

Duty and Responsibilities - Perform general routine inspection of company’s vital operating machines, equipment and public lightings as to ensure smooth operating per schedule. - Attends to complaints with repairs and job orders or urgent top priority through phone calls from other departments/ guest without delay. - Performs general repairs, operation and...

1.Responsible for checking the operational status of the equipment, lubricate and tighten when neede, to ensure the safe operation of the equipment. 2.Responsible for preparing material according to the type and characteristic of the material. 3.Do a good job on site and fixed placement work. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and...

1. Responsible for the normal operation of all belts in the magnetic separation production line to prevent belt deviation, foreign matters scratching the belt, material emission and other phenomena. 2. Ensure that there is no material falling around the equipment. Once it is found that any material is scattered around the equipment, the scattered material...

1.Responsible for the installation, commissioning, technical transformation, repair and maintenance of high and low voltage distribution circuits and electrical equipment in various workshops. 2.Must have good knowledge of the blast furnace production process and be able to understand the usage, structure, principle, performance and operational maintenance...

1. Responsible for checking the acceptance and quality inspection of various scrap. 2. Responsible for the supply, coordination and transportation of various scrap in the workshop. 3. Master the amount of scrap steel and the amount of scrap, timely sort the qualified scraps, and strengthen the transfer and management of scrap. Alliance Steel (M) Sdn Bhd...

*This vacancy open for Pellet Workshop and Conveyor Belt Project. *Pellet workshop estimated will start operate on December 2020. *Conveyor belt project estimated will start operate on April 2021. 1. Be responsible for professional spot check, maintenance, repair and replacement of all mechanical equipment such as pipe belt machine and port material...

1.Responsible for the end point and behind furnace sampling, sample delivery, and sample report work. 2.Responsible for the temperature measurement at the end point and behind the furnace. 3.Responsible for the slag blocking and slag pressing work in the tapping process. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and officially commissioned in...

1.Responsible for checking the working condition of the bag to ensure that the gas dust content is 5mg/m3. 2.Responsible for adjusting the gas release pressure regularly to ensure safe operation of gas pipeline network. 3.Responsible for conducting point check for the operation of the bag filter and replace the damaged bag in time. Alliance Steel (M) Sdn Bhd...