Dry Dedusting Technician, Blast Furnace Workshop

1.Responsible for communicating with the feeding controller and blast furnace manager, charge and distribute the material according to the requested order. 2.Command charging technician to prepare raw material according to real time usage and material type. 3.Responsible for preparing the charging order plan according to the blast furnace deputy senior...

1.Responsible for organizing worker to heat the stove and provide the required wind temperature for the blast furnace, to create the optimum conditions to reduce energy consumption. 2.Responsible for adjusting gas consumption, reduce gas consumption, and ensure safe operation of the gas system. 3.Cooperate with the squad leader to train reserve...

1.Responsible for checking the operational status of the equipment, lubricate and tighten when neede, to ensure the safe operation of the equipment. 2.Responsible for preparing material according to the type and characteristic of the material. 3.Do a good job on site and fixed placement work. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and...

1.Responsible for carry out daily dedusting and cleaning work at the high-risk working place safely and effectively. 2.The bag replacement inside the box area is considered working in confined space and require personnel to have good prior safety and operational knowledge of the position, as the person is required to able to use various gases safely, and...

1. According to the production close the fan ban,open the rising pipe cover ,and open the coal charging hole cover to dry the furnace. 2.Open the high pressure ammonia. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and officially commissioned in June 2019, it is the largest steel manufacturer in Malaysia in terms of output capacity and range of...

1. Be responsible for the maintenance and repair of the furnace door of the post, master the equipment principle, operation process, safety precautions of the post, and understand the maintenance methods and technical requirements of the furnace door. 2. Be familiar with the functions and basic requirements of coke oven door accessories. 3. The special...

1.Responsible for the installation, commissioning, technical transformation, repair and maintenance of high and low voltage distribution circuits and electrical equipment in various workshops. 2.Must have good knowledge of the blast furnace production process and be able to understand the usage, structure, principle, performance and operational maintenance...

*This vacancy open for Pellet Workshop and Conveyor Belt Project. *Pellet workshop estimated will start operate on December 2020. *Conveyor belt project estimated will start operate on April 2021. 1. Master the performance and working principle of the equipment in this position, and be responsible for the start-stop operation and maintenance of the disc...

1. Be responsible for timely and accurate weighing of alloy materials, and participate in terminal sampling, temperature measurement, argon blowing operation and ladle insulation operation. 2. Responsible for deoxidation and alloying operations in the process of steel drawing, and determined the alloy yield. 3. Communicate with the furnace chief frequently...

1. Assist the manager of production control in production especially converter workshop. Organize the production of the converter, and work hard to fully complete the production tasks. 2. Responsible for working with the company's general production control technician and the iron making plant production control technician, keeping abreast of the molten iron...

1. Responsible for the handling of gas operation and process accident handling. 2. Check the furnace operation, check the lime roasting situation. 3. Handling of emergency accidents during equipment work and production. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and officially commissioned in June 2019, it is the largest steel manufacturer in...

1.BPRT equipment and water pump are the core auxiliary equipment of iron making. Responsible for the operation management and technical guidance to handle different blast furnace conditions. 2.BPRT equipment involved hazardous gas, and are considered high risk work. 3.Positions related are mostly automated, cooperate with blast furnace which involved...

1. Regularly replace the filter elements of each hydraulic station, its valve frame, thin oil lubrication station, oil and gas lubrication station and dry oil station to ensure that the working pressure difference value of the fluid medium is within the specified range and that the equipment in this area is in good condition and normal operation. 2. Maintain...

1. Responsible for the installation, repair and maintenance of high and low voltage lines, motors and electrical equipment 2. Responsible for the maintenance of all PLCs. 3. Responsible for the design and installation of electrical circuit and maintenance of all electrical equipment in operation. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and...

1. Responsible for checking the acceptance and quality inspection of various scrap. 2. Responsible for the supply, coordination and transportation of various scrap in the workshop. 3. Master the amount of scrap steel and the amount of scrap, timely sort the qualified scraps, and strengthen the transfer and management of scrap. Alliance Steel (M) Sdn Bhd...

1. Responsible for the normal operation of all belts in the magnetic separation production line to prevent belt deviation, foreign matters scratching the belt, material emission and other phenomena. 2. Ensure that there is no material falling around the equipment. Once it is found that any material is scattered around the equipment, the scattered material...

1. Be fully responsible for the management of receiving raw materials to the coal bunker, and take direct responsibility for the mixed coal bunker or the wrong bunker. 2. Be familiar with the internal index and appearance quality of the required filling coal, and ensure that the safe position meets the coal blending production demand. 3. Ensure the safe...

1. Responsible for editing and establishing the surfacing technology of this section, regularly guiding and supervising the implementation of the standard of the surfacing technology, comprehensively managing the equipment, personnel, safety and comprehensive quality of the surfacing section, and cooperating with the workshop director to complete the...

1. Responsible for the sorting, shovel, and furnace rolling of the billet in the responsible on-site workshop area. 2. Responsible for the organization and planning of the site in the responsible on-site workshop area. 3. In conjunction with the steel-making Testing station, the rolling mill must be meticulous, and the production should be carried out...

1. Through the vibrating screen operation, the material is screened to ensure that the screened lump ore is free of powder and meets the requirements of blast furnace. The screening effect is observed to ensure uniform feeding, smooth feeding and prevention of material blockage at the blanking port. 2. Do an inspection and routine check on the post...