Technician of Lime Kiln Furnace Body, Lime Kiln

6 months ago


Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

1. Responsible for the handling of gas operation and process accident handling. 2. Check the furnace operation, check the lime roasting situation. 3. Handling of emergency accidents during equipment work and production.
Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and officially commissioned in June 2019, it is the largest steel manufacturer in Malaysia in terms of output capacity and range of products. ASSB sets to produce 3.5MT of wire coil, rod, and H-beam per year. ASSB is located in Malaysia-China Kuantan Industrial Park (MCKIP), strategically next to the East Coast Expressway that stretches from Terengganu to Kuala Lumpur. It is also strategically next to Kuantan Port, which now facilitated with the Deep Water Terminal that ease global waterway transportation. Aiming to be the exemplar in Malaysian steel industry, ASSB adopting green initiatives in its blast furnace ironmaking and converter steelmaking, apart from focusing on reuse, reduce, and recycle in production process. Strive to be the most competitive steel manufacturer in Malaysia as well as the ASEAN region, ASSB is certified with the ISO9001:2015 QMS Certification and has its wide products range recognized and certified in various markets and regions.
Diploma / Advanced Diploma / Higher Graduate Diploma / DVM / DKM Level 4 / DLKM Level 5



  • Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1.Responsible for communicating with the feeding controller and blast furnace manager, charge and distribute the material according to the requested order. 2.Command charging technician to prepare raw material according to real time usage and material type. 3.Responsible for preparing the charging order plan according to the blast furnace deputy senior...


  • Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Be responsible for the maintenance and repair of the furnace door of the post, master the equipment principle, operation process, safety precautions of the post, and understand the maintenance methods and technical requirements of the furnace door. 2. Be familiar with the functions and basic requirements of coke oven door accessories. 3. The special...


  • Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1.Responsible for organizing worker to heat the stove and provide the required wind temperature for the blast furnace, to create the optimum conditions to reduce energy consumption. 2.Responsible for adjusting gas consumption, reduce gas consumption, and ensure safe operation of the gas system. 3.Cooperate with the squad leader to train reserve...


  • Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1.Responsible for checking the operational status of the equipment, lubricate and tighten when neede, to ensure the safe operation of the equipment. 2.Responsible for preparing material according to the type and characteristic of the material. 3.Do a good job on site and fixed placement work. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and...


  • Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1.Responsible for checking the working condition of the bag to ensure that the gas dust content is 5mg/m3. 2.Responsible for adjusting the gas release pressure regularly to ensure safe operation of gas pipeline network. 3.Responsible for conducting point check for the operation of the bag filter and replace the damaged bag in time. Alliance Steel (M) Sdn Bhd...


  • Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Assist the manager of production control in production especially converter workshop. Organize the production of the converter, and work hard to fully complete the production tasks. 2. Responsible for working with the company's general production control technician and the iron making plant production control technician, keeping abreast of the molten iron...


  • Kuantan, Pahang, Malaysia Agensi Pekerjaan Great Pyramid Sdn Bhd Full time

    Overview of the Role">The Production Operations Director will oversee the daily operations of the production facility, ensuring that all processes run smoothly and efficiently while adhering to high standards of safety, quality, and efficiency. This role requires someone with a strong technical background and leadership capabilities.This position plays a...


  • Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1.BPRT equipment and water pump are the core auxiliary equipment of iron making. Responsible for the operation management and technical guidance to handle different blast furnace conditions. 2.BPRT equipment involved hazardous gas, and are considered high risk work. 3.Positions related are mostly automated, cooperate with blast furnace which involved...

  • Control Technician

    6 months ago


    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1) be responsible for normal monitoring (temperature, pressure, displacement, etc.) and switching, stopping and replacing of major equipment such as washing tower, ammonia distillation tower, desulfurization tower, Claus furnace and waste boiler. 2) monitor and adjust the process parameters. Such as temperature, pressure, flow control to ensure gas, ammonia...

  • Electrical Technician

    6 months ago


    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1.Responsible for the installation, commissioning, technical transformation, repair and maintenance of high and low voltage distribution circuits and electrical equipment in various workshops. 2.Must have good knowledge of the blast furnace production process and be able to understand the usage, structure, principle, performance and operational maintenance...


  • Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Be responsible for timely and accurate weighing of alloy materials, and participate in terminal sampling, temperature measurement, argon blowing operation and ladle insulation operation. 2. Responsible for deoxidation and alloying operations in the process of steel drawing, and determined the alloy yield. 3. Communicate with the furnace chief frequently...


  • Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Through the vibrating screen operation, the material is screened to ensure that the screened lump ore is free of powder and meets the requirements of blast furnace. The screening effect is observed to ensure uniform feeding, smooth feeding and prevention of material blockage at the blanking port. 2. Do an inspection and routine check on the post...

  • Scrap Technician

    6 months ago


    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Responsible for checking the acceptance and quality inspection of various scrap. 2. Responsible for the supply, coordination and transportation of various scrap in the workshop. 3. Master the amount of scrap steel and the amount of scrap, timely sort the qualified scraps, and strengthen the transfer and management of scrap. Alliance Steel (M) Sdn Bhd...

  • Hardcover Technician

    6 months ago


    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Responsible for the assembly and on-line installation of the roller box. strictly implement the technical requirements for the assembly of the roller box, and make the assembly records. 2. Responsible for timely handling of equipment failures in daily production to ensure smooth production. 2. Responsible for timely handling of equipment failures in daily...

  • CNC Milling Technician

    6 months ago


    Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Responsible for the implementation of milling standards, according to the grinding standards of the roller ring grinding, to achieve drawings, templates, passes in line with the three, grinding deviation and surface roughness to meet the requirements of the drawing. 2.Responsible for editing reasonable processing procedures, machining and quality...


  • Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Responsible for the operation of the packing machine in the finishing area of the factory, and bundling the finished products according to the production packaging standard. 2. Responsible for the inspection, maintenance and maintenance of the baler, and fundamentally ensure the smooth operation of the equipment and the smooth production. Alliance Steel...


  • Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Be responsible for the organization and implementation of daily maintenance, repair and maintenance of vehicles, as well as the storage, maintenance and use of maintenance tools and equipment. 2. When removing the faulty vehicle parts, confirm whether the parts can be repaired. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and officially...


  • Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Responsible for the recovery of gas, the opening and closing of all valves and equipment such as starting and stopping pressure machine and electric dust remover, and carefully fill in the equipment operation record. 2. Be responsible for the patrol inspection, maintenance and maintenance of gas tank equipment and facilities, as well as the early...


  • Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Under the leadership of the dispatching Control Senior Manager, according to the operation of the equipment in each capacity and energy-using department, the balance of energy supply and supply of the whole company is guaranteed. 2. Responsible for the scheduling, collection and analysis of the production and consumption information of daily energy media,...


  • Kuantan, Malaysia ALLIANCE STEEL (M) SDN BHD Full time

    1. Responsible for the assembly and on-line installation of the roller box. strictly implement the technical requirements for the assembly of the roller box, and make the assembly records. 2. Responsible for timely handling of equipment failures in daily production to ensure smooth production. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and...