Maintenance Technician of Coke Oven Furnace Door

1. Obey the shift leader's management to complete the planned task on duty. 2. Carefully implement the safety operation procedures of the post, complete the coke receiving and quenching tasks on duty, and be familiar with the special operation and accident handling methods of the post. 3. Understand the equipment performance, structure and principle of the...

1. Assist the on duty section chief to organize the production personnel of each post to work orderly. 2. Check the work quality of each post and organize the staff to deal with the hidden dangers of each post in time, and take effective measures to ensure the safety production of the team. 3. Be familiar with the operation technology skills of the coal and...

1. Familiar with and master the operating procedures and safety operating procedures of this post and implement them carefully. 2. Assist the driver to pick up the furnace door and stand at the designated position. 3. Complete the furnace door, furnace frame cleaning, tail coke cleaning, and the treatment of tar and debris in the bottom grinding plate, knife...

1. According to the production close the fan ban,open the rising pipe cover ,and open the coal charging hole cover to dry the furnace. 2.Open the high pressure ammonia. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and officially commissioned in June 2019, it is the largest steel manufacturer in Malaysia in terms of output capacity and range of...

1.Responsible for communicating with the feeding controller and blast furnace manager, charge and distribute the material according to the requested order. 2.Command charging technician to prepare raw material according to real time usage and material type. 3.Responsible for preparing the charging order plan according to the blast furnace deputy senior...

1. Responsible for the installation, repair and maintenance of high and low voltage lines, motors and electrical equipment 2. Responsible for the maintenance of all PLCs. 3. Responsible for the design and installation of electrical circuit and maintenance of all electrical equipment in operation. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and...

1. Under the leadership of the deputy director, do a good job in the spot check of equipment in the workshop, and take direct management responsibility for the impact of equipment accidents on production due to the spot check not in place. 2. Reasonably arrange spot inspection and maintenance according to the tasks assigned by the deputy director of the...

1.Responsible for the installation, commissioning, technical transformation, repair and maintenance of high and low voltage distribution circuits and electrical equipment in various workshops. 2.Must have good knowledge of the blast furnace production process and be able to understand the usage, structure, principle, performance and operational maintenance...

1.Responsible for the daily routine work of labority team. 2. Test iron ore, coal coke and other raw materials strictly in accordance with cnas-cl01 standards and other CNAS standards and operating instructions. 3. Responsible for the normal maintenance and maintenance of laboratory instruments and equipment, check the operation of instruments and equipment...

1. Be responsible for the organization and implementation of daily maintenance, repair and maintenance of vehicles, as well as the storage, maintenance and use of maintenance tools and equipment. 2. When removing the faulty vehicle parts, confirm whether the parts can be repaired. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and officially...

1. Responsible for the handling of gas operation and process accident handling. 2. Check the furnace operation, check the lime roasting situation. 3. Handling of emergency accidents during equipment work and production. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and officially commissioned in June 2019, it is the largest steel manufacturer in...

1) Be responsible for the monitoring (flow, pressure, temperature) of ammonia distillation tower, desulfurization tower, tubular furnace, heat exchanger, pump and other equipment to ensure that the ammonia wastewater, lean and rich liquid are qualified. 2) Be responsible for the operation of ammonia tower, desulfurization tower, tubular furnace, heat...

1.Responsible for organizing worker to heat the stove and provide the required wind temperature for the blast furnace, to create the optimum conditions to reduce energy consumption. 2.Responsible for adjusting gas consumption, reduce gas consumption, and ensure safe operation of the gas system. 3.Cooperate with the squad leader to train reserve...

1) Registered with IKM1. 2)Test iron ore, coal coke and other raw materials strictly in accordance with cnas-cl01 standards and other CNAS standards and operating instructions; 3) Responsible for the normal maintenance and maintenance of laboratory instruments and equipment, check the operation of instruments and equipment according to regulations, and do a...

1.Responsible for checking the operational status of the equipment, lubricate and tighten when neede, to ensure the safe operation of the equipment. 2.Responsible for preparing material according to the type and characteristic of the material. 3.Do a good job on site and fixed placement work. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and...

1. Be responsible for the organization and implementation of daily maintenance, repair and maintenance of vehicles, as well as the storage, maintenance and use of maintenance tools and equipment. 2. At the same time of removing the faulty vehicle parts, confirm whether the parts can be repaired first, and do not dispose the parts that can be used as waste...

1.Responsible for checking the working condition of the bag to ensure that the gas dust content is 5mg/m3. 2.Responsible for adjusting the gas release pressure regularly to ensure safe operation of gas pipeline network. 3.Responsible for conducting point check for the operation of the bag filter and replace the damaged bag in time. Alliance Steel (M) Sdn Bhd...

1. Assist the shift leader in charge of the coal loading operation and furnace top area management of the shift. 2. Strictly implement the safety regulations and technical regulations of the post, and constantly improve the awareness of safety production. 3. Maintain and maintain the equipment of the post, keep the equipment of the post clean, and be...

1. Eliminate mechanical failures and complete routine repairs in a timely manner to ensure safe and reliable operation of the equipment. 2. Familiar with gas welding, metal cutting process, skilled in general mechanical repair equipment. 3. Be responsible for 24 hours a day, the equipment may breaks down at any time, and the equipment operator must rush to...

1. Responsible for the normal monitoring (temperature, pressure, displacement, etc.) and switching, stopping and replacing of gas fans, primary coolers and other major equipment. 2. Monitor and adjust the process parameters. Such as the control of temperature, pressure and flow to ensure the quality of gas. 3. Responsible for on-site monitoring of regional...