Coking Dept Denaphthalene Distillation Operator

1. Be responsible for the coke blocking production operation of the shift, obey the shift leader's management, and cooperate to complete the production planning task of the shift. 2. Be responsible for cleaning the furnace door, furnace frame, replacing the furnace door in question, and making the patrol inspection record of the group's equipment points. 3....

1. Assist the on duty section chief to organize the production personnel of each post to work orderly. 2. Check the work quality of each post and organize the staff to deal with the hidden dangers of each post in time, and take effective measures to ensure the safety production of the team. 3. Be familiar with the operation technology skills of the coal and...

1. Obey the shift leader's management to complete the planned task on duty. 2. Carefully implement the safety operation procedures of the post, complete the coke receiving and quenching tasks on duty, and be familiar with the special operation and accident handling methods of the post. 3. Understand the equipment performance, structure and principle of the...

1) Registered with IKM1. 2)Test iron ore, coal coke and other raw materials strictly in accordance with cnas-cl01 standards and other CNAS standards and operating instructions; 3) Responsible for the normal maintenance and maintenance of laboratory instruments and equipment, check the operation of instruments and equipment according to regulations, and do a...

1. Be responsible for the maintenance and repair of the furnace door of the post, master the equipment principle, operation process, safety precautions of the post, and understand the maintenance methods and technical requirements of the furnace door. 2. Be familiar with the functions and basic requirements of coke oven door accessories. 3. The special...

1. Familiar with and master the operating procedures and safety operating procedures of this post and implement them carefully. 2. Assist the driver to pick up the furnace door and stand at the designated position. 3. Complete the furnace door, furnace frame cleaning, tail coke cleaning, and the treatment of tar and debris in the bottom grinding plate, knife...

1. Responsible for the installation, repair and maintenance of high and low voltage lines, motors and electrical equipment 2. Responsible for the maintenance of all PLCs. 3. Responsible for the design and installation of electrical circuit and maintenance of all electrical equipment in operation. 1. Be responsible for the operation of the belt cooler and...

1. Responsible for the normal monitoring (temperature, pressure, displacement, etc.) and switching, stopping and replacing of gas fans, primary coolers and other major equipment. 2. Monitor and adjust the process parameters. Such as the control of temperature, pressure and flow to ensure the quality of gas. 3. Responsible for on-site monitoring of regional...

1. Eliminate mechanical failures and complete routine repairs in a timely manner to ensure safe and reliable operation of the equipment. 2. Familiar with gas welding, metal cutting process, skilled in general mechanical repair equipment. 3. Be responsible for 24 hours a day, the equipment may breaks down at any time, and the equipment operator must rush to...

1. Assist the shift leader in charge of the coal loading operation and furnace top area management of the shift. 2. Strictly implement the safety regulations and technical regulations of the post, and constantly improve the awareness of safety production. 3. Maintain and maintain the equipment of the post, keep the equipment of the post clean, and be...

1) Follow up the sludge pressure in the sedimentation tank to ensure the effluent turbidity is qualified. 2) Be responsible for the preparation of chemicals. 3) Be responsible for the central monitoring of regional hot work, safety and environmental protection to ensure safe production. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and officially...

1. According to the production close the fan ban,open the rising pipe cover ,and open the coal charging hole cover to dry the furnace. 2.Open the high pressure ammonia. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and officially commissioned in June 2019, it is the largest steel manufacturer in Malaysia in terms of output capacity and range of...

1.Responsible for carry out daily dedusting and cleaning work at the high-risk working place safely and effectively. 2.The bag replacement inside the box area is considered working in confined space and require personnel to have good prior safety and operational knowledge of the position, as the person is required to able to use various gases safely, and...

1. Responsible for the installation, repair and maintenance of high and low voltage lines, motors and electrical equipment 2. Responsible for the maintenance of all PLCs. 3. Responsible for the design and installation of electrical circuit and maintenance of all electrical equipment in operation. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and...

1. Conscientiously implement the management requirements of the workshop and the safety operation of the post, and organize the coordination of the personnel of each post; 2. Understand the production status, adjust the production frequency in time, ensure the production is stable and the quality is qualified, and be able to complete the production plan on...

1.Responsible for the daily routine work of labority team. 2. Test iron ore, coal coke and other raw materials strictly in accordance with cnas-cl01 standards and other CNAS standards and operating instructions. 3. Responsible for the normal maintenance and maintenance of laboratory instruments and equipment, check the operation of instruments and equipment...

1. Master the basic operation of the measurement squad leader of the “unattended” weighing system. The “unmanned” weighing system is a Chinese-led system developed by CCID for the informationization of the United Steel Group. 2. Familiar with the specifications, models and types of finished materials, semi-finished products and related by-products,...

1. Responsible for the monitoring of refrigeration equipment, circulating pumps, cooling towers, etc. (temperature, pressure, liquid level) 2. Abnormal switching, stopping and changing operation of refrigerator and circulating pump. 3. Adjust the steam pressure, ensure the temperature of circulating water and low temperature water, and ensure the normal gas...

1. Be responsible for the management of coal blending scheme implementation, and take full responsibility for quality accidents caused by poor implementation. 2. Be responsible for contacting the coal distribution workers, loading and filling the coal according to the sequence required for coal blending, and recording and filing. 3. Be familiar with coal...

1.Perform daily maintenance and safety checks of equipment. 2.Preparing and positioning plant for operation on site. 3.Operate the machine and other heavy equipment in a safe and appropriate manner. 4.Selecting, fitting and removing attachments such as buckets, scoops, shovel blades, rock breaking hammers, winches and blades. Alliance Steel (M) Sdn Bhd...