Central Controller, Coke and Coal Workshop

1. Assist the on duty section chief to organize the production personnel of each post to work orderly. 2. Check the work quality of each post and organize the staff to deal with the hidden dangers of each post in time, and take effective measures to ensure the safety production of the team. 3. Be familiar with the operation technology skills of the coal and...

1. Complete the coke pushing, coal leveling and production plan of the shift, and convey the production instructions issued by the working section. 2. Clean the furnace door and furnace door frame of the shift, and assist the furnace door station to replace the problematic furnace door. 3. Deal with the remaining coal and coke of the shift, and assist the...

1. Have to understand function of pulverized coal injection equipment familliar with pulverized coal injection equipment operation. 2. Ensure coal injection to the blast furnace is balanced, stable and sufficient. 3. When there are changes in the blast furnace coal requirement must be able to calculate the injection rate per minute,per 10 minute and per half...

1. Assist the shift leader in charge of the coal loading operation and furnace top area management of the shift. 2. Strictly implement the safety regulations and technical regulations of the post, and constantly improve the awareness of safety production. 3. Maintain and maintain the equipment of the post, keep the equipment of the post clean, and be...

1, assist the sintering foreman on duty to do a good job in the organization and command of the sintering production of this class, responsible for the technical operation of the central control room, organize the production of this class according to the requirements of the workshop plan. 2. Be responsible for the sintering machine system, finished product...

1. To assist the foreman on duty conveyor belt machine to do a good class ingredients production organization and command, be responsible for the technical operation of the central control room, organize the production of this class according to the requirements of the workshop plan. 2. Be responsible for the correct use and inspection of the conveying...

1. Be fully responsible for the management of receiving raw materials to the coal bunker, and take direct responsibility for the mixed coal bunker or the wrong bunker. 2. Be familiar with the internal index and appearance quality of the required filling coal, and ensure that the safe position meets the coal blending production demand. 3. Ensure the safe...

1) Registered with IKM1. 2)Test iron ore, coal coke and other raw materials strictly in accordance with cnas-cl01 standards and other CNAS standards and operating instructions; 3) Responsible for the normal maintenance and maintenance of laboratory instruments and equipment, check the operation of instruments and equipment according to regulations, and do a...

1.Responsible for the daily routine work of labority team. 2. Test iron ore, coal coke and other raw materials strictly in accordance with cnas-cl01 standards and other CNAS standards and operating instructions. 3. Responsible for the normal maintenance and maintenance of laboratory instruments and equipment, check the operation of instruments and equipment...

1. According to the production close the fan ban,open the rising pipe cover ,and open the coal charging hole cover to dry the furnace. 2.Open the high pressure ammonia. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and officially commissioned in June 2019, it is the largest steel manufacturer in Malaysia in terms of output capacity and range of...

1. Responsible for the installation, repair and maintenance of high and low voltage lines, motors and electrical equipment 2. Responsible for the maintenance of all PLCs. 3. Responsible for the design and installation of electrical circuit and maintenance of all electrical equipment in operation. 1. Be responsible for the operation of the belt cooler and...

1. Under the leadership of the deputy director, do a good job in the spot check of equipment in the workshop, and take direct management responsibility for the impact of equipment accidents on production due to the spot check not in place. 2. Reasonably arrange spot inspection and maintenance according to the tasks assigned by the deputy director of the...

1. Responsible for the installation, repair and maintenance of high and low voltage lines, motors and electrical equipment 2. Responsible for the maintenance of all PLCs. 3. Responsible for the design and installation of electrical circuit and maintenance of all electrical equipment in operation. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and...

1. Proficient in general mechanical equipment and production technology, technical control of newly added equipment technical transformation projects, technical transformation of equipment failure points, and be prepared to work during holidays. Be familiar with mechanical drawings, be proficient in CAD, and related office software. 2. Responsible for the...

1. Conscientiously implement the management requirements of the workshop and the safety operation of the post, and organize the coordination of the personnel of each post; 2. Understand the production status, adjust the production frequency in time, ensure the production is stable and the quality is qualified, and be able to complete the production plan on...

1) Follow up the sludge pressure in the sedimentation tank to ensure the effluent turbidity is qualified. 2) Be responsible for the preparation of chemicals. 3) Be responsible for the central monitoring of regional hot work, safety and environmental protection to ensure safe production. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and officially...

1.Responsible for communicating with the feeding controller and blast furnace manager, charge and distribute the material according to the requested order. 2.Command charging technician to prepare raw material according to real time usage and material type. 3.Responsible for preparing the charging order plan according to the blast furnace deputy senior...

1. Responsible for the normal monitoring (temperature, pressure, displacement, etc.) and switching, stopping and replacing of gas fans, primary coolers and other major equipment. 2. Monitor and adjust the process parameters. Such as the control of temperature, pressure and flow to ensure the quality of gas. 3. Responsible for on-site monitoring of regional...

1) be responsible for normal monitoring (temperature, pressure, displacement, etc.) and switching, stopping and replacing of major equipment such as washing tower, ammonia distillation tower, desulfurization tower, Claus furnace and waste boiler. 2) monitor and adjust the process parameters. Such as temperature, pressure, flow control to ensure gas, ammonia...

1. Assist the manager of production control in production especially converter workshop. Organize the production of the converter, and work hard to fully complete the production tasks. 2. Responsible for working with the company's general production control technician and the iron making plant production control technician, keeping abreast of the molten iron...