Pellet Making Technician, Pellet Workshop

*This vacancy open for Pellet Workshop and Conveyor Belt Project. *Pellet workshop estimated will start operate on December 2020. *Conveyor belt project estimated will start operate on April 2021. 1. Be familiar and master the technical theory and practical operation skills of electrical work, as well as the equipment performance of each area. 2. Be...

PTS Goldkist Industries SDN BHD commenced operation in the year 1983. It is located at the prime location of Gebeng Industrial Estate, Kuantan, near the deep water Kuantan Port. It is the first modern feedmill in the East Coast of Peninsular Malaysia. The feedmill was designed to incorporate some of the more practical and energy efficient features of a post...

Electrical engineering technicians work together with electrical engineers in electrical engineering reasearch. They perform technical tasks and aid in the designing, testing, manufacturing and operation of electrical devices and facilities. Our service cantre is fully equiped to assist and facilitate all works. This gives us the edge to superseed other...

1. Assist the manager of production control in production especially converter workshop. Organize the production of the converter, and work hard to fully complete the production tasks. 2. Responsible for working with the company's general production control technician and the iron making plant production control technician, keeping abreast of the molten iron...

1. Have to understand function of dust production equipment, familliar with dust prodution equipment operation, ensure dust production runs smoothly and normal production. 2. Must know how to inspect equipment, must be able to repair and solve when encounter equipment problem. 3. When doing dust production must be according to the coal water content, adjust...

1. Do a good job in the trial operation of various equipment before pouring, feed back the problems in time and cooperate with them until they pass the acceptance. 2. Do a good job in spot inspection, use and maintenance of equipment within the post area, fill in relevant records, and cooperate with maintenance workers to do a good job in online equipment...

1. Responsible for the installation, repair and maintenance of high and low voltage lines, motors and electrical equipment 2. Responsible for the maintenance of all PLCs. 3. Responsible for the design and installation of electrical circuit and maintenance of all electrical equipment in operation. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and...

1. Be responsible for timely and accurate weighing of alloy materials, and participate in terminal sampling, temperature measurement, argon blowing operation and ladle insulation operation. 2. Responsible for deoxidation and alloying operations in the process of steel drawing, and determined the alloy yield. 3. Communicate with the furnace chief frequently...

Duty and Responsibilities - Perform general routine inspection of company’s vital operating machines, equipment and public lightings as to ensure smooth operating per schedule. - Attends to complaints with repairs and job orders or urgent top priority through phone calls from other departments/ guest without delay. - Performs general repairs, operation and...

1.Responsible for checking the operational status of the equipment, lubricate and tighten when neede, to ensure the safe operation of the equipment. 2.Responsible for preparing material according to the type and characteristic of the material. 3.Do a good job on site and fixed placement work. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and...

1. Responsible for the normal operation of all belts in the magnetic separation production line to prevent belt deviation, foreign matters scratching the belt, material emission and other phenomena. 2. Ensure that there is no material falling around the equipment. Once it is found that any material is scattered around the equipment, the scattered material...

1.Responsible for the installation, commissioning, technical transformation, repair and maintenance of high and low voltage distribution circuits and electrical equipment in various workshops. 2.Must have good knowledge of the blast furnace production process and be able to understand the usage, structure, principle, performance and operational maintenance...

1. Responsible for checking the acceptance and quality inspection of various scrap. 2. Responsible for the supply, coordination and transportation of various scrap in the workshop. 3. Master the amount of scrap steel and the amount of scrap, timely sort the qualified scraps, and strengthen the transfer and management of scrap. Alliance Steel (M) Sdn Bhd...

1. Be fully responsible for the management of receiving raw materials to the coal bunker, and take direct responsibility for the mixed coal bunker or the wrong bunker. 2. Be familiar with the internal index and appearance quality of the required filling coal, and ensure that the safe position meets the coal blending production demand. 3. Ensure the safe...

1.Responsible for checking the working condition of the bag to ensure that the gas dust content is 5mg/m3. 2.Responsible for adjusting the gas release pressure regularly to ensure safe operation of gas pipeline network. 3.Responsible for conducting point check for the operation of the bag filter and replace the damaged bag in time. Alliance Steel (M) Sdn Bhd...

1. To assist the foreman on duty conveyor belt machine to do a good class ingredients production organization and command, be responsible for the technical operation of the central control room, organize the production of this class according to the requirements of the workshop plan. 2. Be responsible for the correct use and inspection of the conveying...

We’re hiring a **Chargeman ( BO )** for **WR Grace Specialty Chemicals (M) Sdn Bhd** located at Gebeng Industrial Area, Kuantan Pahang who will report to the E & I Supervisor. You will be responsible for maintaining the plant electrical system in order to ensure uninterrupted, safe and smooth power supply for plant operation**Responsibilities** - Actively...

1.Responsible for organizing worker to heat the stove and provide the required wind temperature for the blast furnace, to create the optimum conditions to reduce energy consumption. 2.Responsible for adjusting gas consumption, reduce gas consumption, and ensure safe operation of the gas system. 3.Cooperate with the squad leader to train reserve...

1. Responsible for editing and establishing the surfacing technology of this section, regularly guiding and supervising the implementation of the standard of the surfacing technology, comprehensively managing the equipment, personnel, safety and comprehensive quality of the surfacing section, and cooperating with the workshop director to complete the...

1. Responsible for the sorting, shovel, and furnace rolling of the billet in the responsible on-site workshop area. 2. Responsible for the organization and planning of the site in the responsible on-site workshop area. 3. In conjunction with the steel-making Testing station, the rolling mill must be meticulous, and the production should be carried out...