Dry Dedusting Technician, Blast Furnace Workshop

1.Responsible for communicating with the feeding controller and blast furnace manager, charge and distribute the material according to the requested order. 2.Command charging technician to prepare raw material according to real time usage and material type. 3.Responsible for preparing the charging order plan according to the blast furnace deputy senior...

1.Responsible for organizing worker to heat the stove and provide the required wind temperature for the blast furnace, to create the optimum conditions to reduce energy consumption. 2.Responsible for adjusting gas consumption, reduce gas consumption, and ensure safe operation of the gas system. 3.Cooperate with the squad leader to train reserve...

1.Responsible for checking the operational status of the equipment, lubricate and tighten when neede, to ensure the safe operation of the equipment. 2.Responsible for preparing material according to the type and characteristic of the material. 3.Do a good job on site and fixed placement work.Alliance Steel (M)Sdn Bhd (ASSB) was established in 2014 and...

1.Responsible for carry out daily dedusting and cleaning work at the high-risk working place safely and effectively. 2.The bag replacement inside the box area is considered working in confined space and require personnel to have good prior safety and operational knowledge of the position, as the person is required to able to use various gases safely, and...

1. Have to understand function of pulverized coal injection equipment familliar with pulverized coal injection equipment operation. 2. Ensure coal injection to the blast furnace is balanced, stable and sufficient. 3. When there are changes in the blast furnace coal requirement must be able to calculate the injection rate per minute,per 10 minute and per half...

1.Responsible for the installation, commissioning, technical transformation, repair and maintenance of high and low voltage distribution circuits and electrical equipment in various workshops. 2.Must have good knowledge of the blast furnace production process and be able to understand the usage, structure, principle, performance and operational maintenance...

1. Be responsible for the maintenance and repair of the furnace door of the post, master the equipment principle, operation process, safety precautions of the post, and understand the maintenance methods and technical requirements of the furnace door. 2. Be familiar with the functions and basic requirements of coke oven door accessories. 3. The special...

*This vacancy open for Pellet Workshop and Conveyor Belt Project. *Pellet workshop estimated will start operate on December 2020. *Conveyor belt project estimated will start operate on April Master the performance and working principle of the equipment in this position, and be responsible for the start-stop operation and maintenance of the disc pelletizer...

1. Be responsible for timely and accurate weighing of alloy materials, and participate in terminal sampling, temperature measurement, argon blowing operation and ladle insulation operation. 2. Responsible for deoxidation and alloying operations in the process of steel drawing, and determined the alloy yield. 3. Communicate with the furnace chief frequently...

1. Assist the manager of production control in production especially converter workshop. Organize the production of the converter, and work hard to fully complete the production tasks. 2. Responsible for working with the company's general production control technician and the iron making plant production control technician, keeping abreast of the molten iron...

1.BPRT equipment and water pump are the core auxiliary equipment of iron making. Responsible for the operation management and technical guidance to handle different blast furnace conditions. 2.BPRT equipment involved hazardous gas, and are considered high risk work. 3.Positions related are mostly automated, cooperate with blast furnace which involved...

1. Responsible for checking the acceptance and quality inspection of various scrap. 2. Responsible for the supply, coordination and transportation of various scrap in the workshop. 3. Master the amount of scrap steel and the amount of scrap, timely sort the qualified scraps, and strengthen the transfer and management of scrap.Alliance Steel (M)Sdn Bhd (ASSB)...

1. Complete the coke pushing, coal leveling and production plan of the shift, and convey the production instructions issued by the working section. 2. Clean the furnace door and furnace door frame of the shift, and assist the furnace door station to replace the problematic furnace door. 3. Deal with the remaining coal and coke of the shift, and assist the...

1. Responsible for the sorting, shovel, and furnace rolling of the billet in the responsible on-site workshop area. 2. Responsible for the organization and planning of the site in the responsible on-site workshop area. 3. In conjunction with the steel-making Testing station, the rolling mill must be meticulous, and the production should be carried out...

1. To assist the foreman on duty conveyor belt machine to do a good class ingredients production organization and command, be responsible for the technical operation of the central control room, organize the production of this class according to the requirements of the workshop plan. 2. Be responsible for the correct use and inspection of the conveying...

1. Responsible for editing and establishing the surfacing technology of this section, regularly guiding and supervising the implementation of the standard of the surfacing technology, comprehensively managing the equipment, personnel, safety and comprehensive quality of the surfacing section, and cooperating with the workshop director to complete the...

1. Through the vibrating screen operation, the material is screened to ensure that the screened lump ore is free of powder and meets the requirements of blast furnace. The screening effect is observed to ensure uniform feeding, smooth feeding and prevention of material blockage at the blanking port. 2. Do an inspection and routine check on the post...

*This vacancy open for Pellet Workshop and Conveyor Belt Project. *Pellet workshop estimated will start operate on December 2020. *Conveyor belt project estimated will start operate on April Be responsible for professional spot check, maintenance, repair and replacement of all mechanical equipment such as pipe belt machine and port material screening machine...

1) be responsible for normal monitoring (temperature, pressure, displacement, etc.) and switching, stopping and replacing of major equipment such as washing tower, ammonia distillation tower, desulfurization tower, Claus furnace and waste boiler. 2) monitor and adjust the process parameters. Such as temperature, pressure, flow control to ensure gas, ammonia...

1. Do a good job in the maintenance and repair of electrical equipment and facilities, do a good job in the prevention of small animals, and ensure safe operation. 2. Stick to the post, regularly patrol the power distribution equipment, closely monitor the working condition of each instrument, accurately record all data and fill in the equipment operation...