Production & Manufacturing Dept Special Safety

1. Publicize and implement all rules and regulations of the company and the Department, and organize drivers to learn all safety management regulations. 2. Be responsible for the safety education of employees, improve the regular safety meeting system, organize and arrange the safety learning and safety inspection of each team, hold the safety analysis...

A site safety supervisor (SSS) is responsible for ensuring a safe and healthy workplace for employees. Their duties include: - Safety inspections: Conducting daily inspections and recommending corrective actions for unsafe conditions and acts - Hazard identification: Proactively identifying hazards, assessing risk, and implementing control measures - Safety...

1. Record inventory sparepart every month. 2. Make sure the cleaniness of the store. 3. Make purchasing spare part on system. 4. Resolve matters regarding spare parts and store issues. Alliance Steel (M) Sdn Bhd (ASSB) was established in 2014 and officially commissioned in June 2019, it is the largest steel manufacturer in Malaysia in terms of output...

1. Responsible for the execution of pass drawing and turning standards, processing of various types, making sure that the drawing, sample and pass conform to the requirements of the drawing, as well as the turning deviation and surface roughness. 2. Responsible for the processing tasks assigned by the section, set up the ledger, and managed it in an orderly...

1. Record inventory sparepart every month. 2. Make sure the cleaniness of the store. 3. Make purchasing spare part on system. 4. Resolve matters regarding spare parts and store issues.Alliance Steel (M)Sdn Bhd (ASSB) was established in 2014 and officially commissioned in June 2019, it is the largest steel manufacturer in Malaysia in terms of output capacity...

1. Responsible for the execution of pass drawing and turning standards, processing of various types, making sure that the drawing, sample and pass conform to the requirements of the drawing, as well as the turning deviation and surface roughness. 2. Responsible for the processing tasks assigned by the section, set up the ledger, and managed it in an orderly...

A site safety supervisor (SSS) is responsible for ensuring a safe and healthy workplace for employeesTheir duties include: Safety inspections: Conducting daily inspections and recommending corrective actions for unsafe conditions and acts Hazard identification: Proactively identifying hazards, assessing risk, and implementing control measures Safety...

1. Based on the operation area of steel-making converter, according to the time gap of molten steel smelting, the operation time of cleaning the slag at the bottom of the furnace shall not affect the converter production, nor the slag turning and slag cleaning. At the same time, the outstanding operation time of the forklift is particularly important. At the...

1) Registered with IKM1. 2)Test iron ore, coal coke and other raw materials strictly in accordance with cnas-cl01 standards and other CNAS standards and operating instructions; 3) Responsible for the normal maintenance and maintenance of laboratory instruments and equipment, check the operation of instruments and equipment according to regulations, and do a...

1) Registered with IKM1. 2)Test iron ore, coal coke and other raw materials strictly in accordance with cnas-cl01 standards and other CNAS standards and operating instructions; 3) Responsible for the normal maintenance and maintenance of laboratory instruments and equipment, check the operation of instruments and equipment according to regulations, and do a...

1. Assisted the section chief to prepare production scheduling steel making and rolling production plans according to the sales plan of the sales company and the actual production capacity of each production unit. 2. Tracked the completion of daily production plan and adjusted the production schedule timely. 3. Real-time tracking and participation in...

1.Perform daily maintenance and safety checks of equipment. 2.Preparing and positioning plant for operation on site. 3.Operate the machine and other heavy equipment in a safe and appropriate manner. 4.Selecting, fitting and removing attachments such as buckets, scoops, shovel blades, rock breaking hammers, winches and blades. Alliance Steel (M) Sdn Bhd...

1. Responsible for the low-level pickling test of the whole class billet; the sample processing and wire-related processing of the wire, threaded bar and H-shaped steel finished work and the supervision class management. 2. Responsible for the sample preparation, low-acid pickling, top test, impact test, tensile test, bending test, metallographic test,...

1. Responsible for the low-level pickling test of the whole class billet; the sample processing and wire-related processing of the wire, threaded bar and H-shaped steel finished work and the supervision class management. 2. Responsible for the sample preparation, low-acid pickling, top test, impact test, tensile test, bending test, metallographic test,...

1. Responsible for oil chemical industry, materials, weak current communication, vehicles and safety and environmental protection equipment and spare parts and other materials procurement docking. 2. Assess relevant purchasing suppliers and go deep into each production unit to confirm various performance index parameters of production spare parts. 3....

1) Be responsible for the monitoring (flow, pressure, temperature) of ammonia distillation tower, desulfurization tower, tubular furnace, heat exchanger, pump and other equipment to ensure that the ammonia wastewater, lean and rich liquid are qualified. 2) Be responsible for the operation of ammonia tower, desulfurization tower, tubular furnace, heat...

1. Assist the substation accident and abnormal treatment, on-site Switching operation, work ticket processing (final, acceptance), regular cutting (round) change test, on-site safety measures, etc. 2. Responsible for the maintenance and repair of various electrical first and second equipments such as a 275KV, 7 35KV, 3 10KV substations, street lamps,...

1. Assist the substation accident and abnormal treatment, on-site Switching operation, work ticket processing (final, acceptance), regular cutting (round) change test, on-site safety measures, etc. 2. Responsible for the maintenance and repair of various electrical first and second equipments such as a 275KV, 7 35KV, 3 10KV substations, street lamps,...

1. Master the basic operation of the measurement squad leader of the “unattended” weighing system. The “unmanned” weighing system is a Chinese-led system developed by CCID for the informationization of the United Steel Group. 2. Familiar with the specifications, models and types of finished materials, semi-finished products and related by-products,...

1. Master the basic operation of the measurement squad leader of the "unattended" weighing system. The "unmanned" weighing system is a Chinese-led system developed by CCID for the informationization of the United Steel Group. 2. Familiar with the specifications, models and types of finished materials, semi-finished products and related by-products, and...