Drafter (Design & Engineering Division)

2 days ago

Bayan Lepas, Penang, Malaysia Radical Internetwork Sdn Bhd Full time 24,000 - 108,000 per year

JOB HIGHLIGHTS

  • Involved in CAD drafting for structured cabling, fiber optic, and Extra Low Voltage (ELV) systems including schematic design, design development, design coordination, submission documentation, and tender documentation.
  • Prepare complete sets of shop drawings and as-built drawings for ICT, ELV, and cabling installations, ensuring compliance with project specifications and standards.
  • Work closely with Engineers, Project Managers, and Site Teams to determine project requirements and functional layouts.
  • Develop cable routing layouts, fiber termination details, rack elevations, and device layouts (e.g., CCTV, access control, and communication points).
  • Revise and update drawings to accommodate design changes or site conditions while maintaining accurate revision logs.
  • Assist in the preparation of submission and certification drawings, including testing and commissioning documentation (e.g., OTDR, OLTS test points).
  • Ensure drafting accuracy and compliance with industry standards (TIA/EIA, ISO/IEC, MS/BS standards) and local building codes.
  • Support the Design & Engineering team in preparing technical documentation, equipment schedules, and design reports.
  • Conduct site surveys when required to verify as-built conditions and coordinate design implementation.
  • Demonstrate strong attention to detail, time management, and teamwork in managing multiple concurrent projects.
  • Produce detailed AutoCAD drawings for structured cabling, fiber optic, ELV, and ICT infrastructure systems.
  • Coordinate drawings between architectural, mechanical, electrical, and ICT disciplines to ensure design consistency.
  • Maintain and update drawing registers, revision control, and drawing archives.
  • Prepare fabrication and isometric layouts for cable trays, conduits, and fiber pathways when required.
  • Liaise with suppliers or vendors for product drawings and specifications as part of the design documentation process.
  • Assist in preparing documentation for project handover, including "as-built" and warranty drawings.

CORE COMPETENCIES

  • Degree, Diploma, or Certificate in Drafting, Engineering, or related technical discipline from a recognized institution.
  • Minimum two (2) years of relevant experience as a Drafter, preferably in ICT, ELV, or engineering project environments.
  • Proficient in AutoCAD; experience with other drafting tools (e.g., Revit, SolidWorks, or Visio) is an advantage.
  • Good knowledge of structured cabling systems, fiber optic networks, ELV systems, and cable management principles.
  • Ability to read and interpret technical drawings, layouts, and site sketches accurately.
  • Strong communication and interpersonal skills, both written and verbal, in English and Bahasa Malaysia.
  • Proficient in Microsoft Office (Word, Excel, PowerPoint).
  • Self-motivated, proactive, and able to work independently with minimal supervision.
  • High commitment to accuracy, documentation quality, and teamwork.

Job Type: Contract

Contract length: 12 months

Pay: RM2, RM4,500.00 per month

Benefits:

  • Cell phone reimbursement
  • Opportunities for promotion
  • Professional development

Application Question(s):

  • When are you available to join us?
  • How many years of experience did you have as a Drafter?
  • What is your expected salary?

Work Location: In person

  • Drafter

    2 days ago

    Bayan Lepas, Penang, Malaysia RADICAL Internetwork SDN BHD Full time 60,000 - 120,000 per year

    Job HighlightsInvolved in CAD drafting for structured cabling, fiber optic, and Extra Low Voltage (ELV) systems including schematic design, design development, design coordination, submission documentation, and tender documentation.Prepare complete sets of shop drawings and as-built drawings for ICT, ELV, and cabling installations, ensuring...

  • Component Engineers

    2 days ago

    Bayan Lepas, Penang, Malaysia Benchmark Electronics IPO Division Full time 80,000 - 120,000 per year

    Responsibilities:Handle electronic components and PCBHandle Bill of Material (BOM) scrub, BOM integrity of electronic components namely manufacturer, manufacturer part numbers, status of parts, etc supporting purchasing and customer needsSource/develop suppliers/manufacturers on alternate components, PCBs technical compatibility.Involve in Technical advice...

  • Supplier Development Engineer

    10 minutes ago

    Bayan Lepas, Penang, Malaysia Benchmark Electronics IPO Division Full time 80,000 - 120,000 per year

    Responsibilities:Source and select mechanical, fabricated, printed circuit board suppliers and fabrication process services in EMS industryTechnical audits, evaluation of suppliers' capabilities, procedures, effectiveness of the Quality SystemReport, follow up, closure of Corrective Action Requests (CARs) with suppliersEngineering queries' resolution, First...

  • Senior Engineer, Analog E&E Design

    2 days ago

    Bayan Lepas, Penang, Malaysia Celestica Full time 80,000 - 120,000 per year

    About the role Celestica, a leading global manufacturing services company, is seeking a highly skilled Senior Engineer Analog E&E Design to join our team in Bayan Lepas, Penang. This full-time position is a crucial role within our Electrical/Electronic Engineering division, contributing to the strategic goals and ongoing success of the organisation.What...

  • Circuit Design Engineer

    2 days ago

    Bayan Lepas, Penang, Malaysia Aemulus Corporation Sdn Bhd Full time $60,000 - $120,000 per year

    We are seeking a passionateCircuit Design Engineerto join our R&D team in developing load boards, probe cards, interface boards, socket boards, and other supporting electronics for semiconductor device testing. The role requires strong knowledge of high-speed digital, analog, mixed-signal, and power circuit design, with a focus on achieving robust signal...

  • Senior Test Engineer

    2 days ago

    Bayan Lepas, Penang, Malaysia Bosch Full time 60,000 - 120,000 per year

    Company DescriptionBosch Cross-Domain Computing Solutions (XC) is a business division within the Mobility Solutions business sector of the Bosch Group. The division unites software, electrical and electronics engineers from the areas of driver assistance, automated driving, car multimedia, powertrain and body electronics in a new unit. XC play a leading role...

  • Senior Mechanical Design Engineer

    10 minutes ago

    Bayan Lepas, Penang, Malaysia IMA AUTOMATION MALAYSIA SDN BHD Full time 120,000 - 180,000 per year

    We are looking for a Senior Mechanical Design Engineer to join our dynamic team. In this key role, you will play a crucial part in designing and building automated production equipment tailored to meet our customers' specific needs. As a Senior Mechanical Design Engineer, you will bring your expertise to all stages of mechanical design while collaborating...

  • Mechanical Design Engineer

    2 days ago

    Bayan Lepas, Penang, Malaysia SRM Integration (Malaysia) Sdn Bhd Full time 60,000 - 80,000 per year

    Responsibilities:Evaluate existing high speed / high tech standard automatic rotary test handler.Design and develop new module according to specification.Preparing BOM for new/repeat handler order according to project summary.Participate in technical review of designs, specification referring to project summary.Support production in solving design related...

  • Mechanical Design Engineer II

    2 days ago

    Bayan Lepas, Penang, Malaysia Jabil Full time $60,000 - $120,000 per year

    Job SummaryUnder the guidance of management, develops new engineering design of a basic to moderate complexity. Gathers design requirements and recommends steps to implement basic to moderate reference design. implementation or design modifications of existing product. Perform and analyze basic to moderate chassis design, referring more complex issues to...

  • Mechanical Design Engineer

    2 weeks ago

    Bayan Lepas, Penang, Malaysia Waftech Sdn Bhd Full time 42,000 - 84,000 per year

    KEY RESPONSIBILITIES:Design automated machine modules and mechanical parts according to customer requirement and the relevant automation industry standard.Prepare final production procedures, operation instructions, process control instructions.Detail drawings of Production and the preparation of BOM List for all the mechanical fab parts and standard...