Process Engineer

1 day ago

Batu Kawan, Penang, Malaysia Greatech Integration (M) Sdn Bhd Full time

Process Engineer (Assembly)

  • To establish build sequence and production workflow.
  • To create Work Instruction of the required process in the production floor.
  • To assess the required jig, fixture and tools.
  • To create PFMEA, control plan and risk assessment.
  • Provide inputs and support IE to optimize production layout.
  • To provide solutions and support for quality issue affecting production deliveries.
  • To liaise with engineering, material, PM and MIS on BOM/ drawing/design changes/issues.
  • To enhance processing techniques and methods applied in production floor.
  • Drive and develop new process improvements to reduce cost and increase productivity.
  • To provide training to production staff on the process, work instruction and improvement implementation to the production floor.
  • Analysis of production data for productivity improvement.
  • To lead/guide/train Process Engineer level 1,2, 3 on process engineering and line improvement.
  • To comply with all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.
  • Other duties and assignments as instructed by superiors from time to time.

Process Engineer (Metal Work)

  • Optimization on metal work machine production flow and output.
  • To review the new drawing metal work fabrication capabilities and provide the process flow, BOM, estimate production lead time for MES BOO & BOM.
  • Establish WI for process plan, process WI and machine operation/set-up procedure for Metal Work processes.
  • To ensure the production processes are well controlled on process times, cycle time and material usage.
  • To lead production machinists and coordinate failure quality issue for root cause analysis, correction and preventive actions.
  • To ensure the production safety and 5S is documentation (WI) implemented and reviewed from time to time for the machinist to follow.
  • To rectify and provide solutions on any issue / rejection that affected production delivery.
  • Provide technical support for metal work department.
  • Analysis on the production data for any improvement needed.
  • To provide training to production staff on the processes, WI and improvement implemented to the production floor.
  • To assess the equipment/tools/Jig needed to be used in the production floor or processes with best cost saving to the department implementation.
  • To ensure the production floor/machine safety & 5S is carried out and maintained accordingly.
  • To lead/guide/train Process Engineer level 1 on the Process Engineering when needed to complete a task assigned.
  • Other duties and assignments as instructed by superiors from time to time.
  • To comply with all requirements of ISO (inclusive of all standards approved by the Management) and to adhere to general safety practices, standard operating procedure, work instructions, policies and guidelines provided by the company.

  • Manufacturing / Process Engineer

    2 weeks ago

    Batu Kawan, Penang, Malaysia a-85f6-44d2-acc7-d0b373fccfa5 Full time $60,000 - $120,000 per year

    Job title: Manufacturing/Process EngineerMake an impact building the backbone of AI, cloud, and 5G At SONT Photonics, we design and manufacture high‑performance optical interconnect products—powering AI computing centers, cloud infrastructure, and telecommunications networks. Join us to turn cutting‑edge photonics into reliable, scalable manufacturing....

  • Welding Process Engineer

    1 week ago

    Batu Kawan, Penang, Malaysia UWC Holdings Sdn Bhd Full time

    Full job descriptionProvide welding engineering support to Engineering, Quality and Manufacturing to fabricate equipment in accordance with all applicable code and customer requirements.Conduct DFM Analyzing engineering designs for welding requirements and process capabilities.Evaluates new developments in welding field for possible application to current...

  • smt process engineer

    1 week ago

    Batu Kawan, Penang, Malaysia PCL INTERNATIONAL TECHNOLOGIES (PENANG) SDN. BHD. Full time

    Roles and Responsibilities:Handle & knowledge well versa the process of SMT is advantage.Have experience & knowledge well with SMT machine eg. FUJI NXT III, Speedline MPM100, Reflow CT930 and etc.Your job responsibilities shall include but not limited to:Initiate, coordinate and drive quality improvement in SMT process.Resolve all quality issues related to...

  • process engineer

    3 days ago

    Batu Kawan, Penang, Malaysia QDOS INTERCONNECT SDN BHD Full time

    ESSENTIAL FUNCTIONSResponsible for overall process readiness and improvement to meet Quality, Yield, Cycle and Cost target. Build strong collaboration with internal partners to drive SOP compliance and mitigate manufacturing risks/surprises. Expand new Process Envelop and Capability to support new design wins and/or manufacturing...

  • Staff Engineer, Process Engineering

    2 weeks ago

    Batu Kawan, Penang, Malaysia SANDISK Full time

    ESSENTIAL DUTIES AND RESPONSIBILITIES:Develop, optimize, and sustain SMT and mechanical assembly process. Focus on laser soldering and selective wave soldering processes.Lead process characterization, DOE, and root cause analysis for yield and quality improvement.Collaborate with cross-functional teams including R&D, manufacturing, and quality to support NPI...

  • Staff Engineer, Process Engineering

    1 week ago

    Batu Kawan, Penang, Malaysia Sandisk Full time

    Company Description Sandisk understands how people and businesses consume data and we relentlessly innovate to deliver solutions that enable today's needs and tomorrow's next big ideas. With a rich history of groundbreaking innovations in Flash and advanced memory technologies, our solutions have become the beating heart of the digital world we're living in...

  • Staff Engineer, Process Engineering

    1 week ago

    Batu Kawan, Penang, Malaysia Sandisk Full time

    Company DescriptionSandisk understands how people and businesses consume data and we relentlessly innovate to deliver solutions that enable today's needs and tomorrow's next big ideas. With a rich history of groundbreaking innovations in Flash and advanced memory technologies, our solutions have become the beating heart of the digital world we're living in...

  • Staff Engineer, Process Engineering

    1 week ago

    Batu Kawan, Penang, Malaysia SanDisk Full time

    Company DescriptionSandisk understands how people and businesses consume data and we relentlessly innovate to deliver solutions that enable today's needs and tomorrow's next big ideas. With a rich history of groundbreaking innovations in Flash and advanced memory technologies, our solutions have become the beating heart of the digital world we're living in...

  • Cnc Process Engineer

    1 week ago

    Batu Kawan, Penang, Malaysia UWC Holdings Sdn Bhd Full time

    RequirementsDiploma/Degree in precision machining /manufacturing Engineering or 3-5years relevant experience.Experience in Lean Manufacturing, Kaizen practice in manufacturing, project management.Problem Solving activities, Design of Experimental (DOE) will be advantageous added.ResponsibilitiesTo define, setup, document and maintain manufacturing...

  • Senior Engineer, Process Engineering

    2 weeks ago

    Batu Kawan, Penang, Malaysia SanDisk Full time

    Company DescriptionSandisk understands how people and businesses consume data and we relentlessly innovate to deliver solutions that enable today's needs and tomorrow's next big ideas. With a rich history of groundbreaking innovations in Flash and advanced memory technologies, our solutions have become the beating heart of the digital world we're living in...