Quality Inspector

2 weeks ago

Batu Kawan, Penang, Malaysia Dexcom Full time

Summary:

The quality inspector is responsible to ensure the activities related to the inspection functions in a manner which meets company standards and methods as determined by quality assurance or other engineering departments.

Performs inspections, checks testing and sampling procedures for product manufacturing processes. Carries out packaging line, manufacturing inspections and sampling and testing of in-process and Lot Release to ensure that company standards are met. Monitors critical equipment and instrumentation. May apply approval or rejection labels to lot/product once analytical data is evaluated.

Essential Duties and Responsibilities:

  • Performing in-process and final product review of documents for accurate format, signatures, dating and Good Documentation Practices (GMP) for commercial and clinical product in a timely matter.
  • Maintain compliance with operating procedures and ensure training is completed prior to the operation of a task.
  • Ensure all documentation is legible, complete, and correct per current Good Manufacturing Practices Inspect labeling for the finished product.
  • Understand and perform line clearance activities in manufacturing.
  • Perform in-process quality audits in manufacturing to assure compliance to manufacturing documentation and good documentation practices.
  • Initiate and assist with the NCMR process during manufacturing of commercial and clinical product.
  • Demonstrate good computer skills and perform computer operations to generate reports and graphs using Microsoft Word and Excel.
  • Perform in-process product inspection and testing for commercial and clinical product.
  • Must be able to distinguish between certain colors
  • Familiarize yourself with the manufacturing processes.
  • Review shipping documentation to assure accurate order shipment.
  • Provide training for new employees
  • Takes on new challenges and expanding roles to assist with growing demands within different areas of the Quality Department.
  • Must have strong organization skills and attention to detail
  • Assumes and performs other duties as assigned.

Required Qualifications:

  • Typically requires a high school certificate (SPM) or Diploma in any field.
  • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required.
  • Experience using computer
  • Ability to understand and perform job per documents instructions in English
  • Good interpersonal and teamwork skills.
  • Must be able to flex schedule to work in different shifts to meet demand.

Preferred Qualifications:

  • Quality Assurance and/or QA/QC experience.
  • Min 0-2 years in the medical device industry or manufacturing industry previous experience.
  • Ideally has experience working with the following: Agile, Oracle and/or Camstar software programs.

  • Quality Engineer

    2 days ago

    Batu Kawan, Penang, Malaysia Hotayi Electronic (M) Sdn Bhd (Hotayi Group) Full time 60,000 - 80,000 per year

    Job description:Ensure products compliance of customer requirements, industry standard.Develop and execute quality system and design methods to improve or enhance process.Perform quality assessments for process and monitor all activities for measuring processes.Responsible to ensure that corrective action is taken when discrepancy is found during internal /...

  • Quality Inspector

    2 days ago

    Batu Kawan, Penang, Malaysia Ascentec Engineering Sdn Bhd Full time 30,000 - 60,000 per year

    · To perform dimensional measurement and quality inspection for in-process, finished, assembled parts and FA parts according to part drawings and specifications.· To use variety of precision measuring instruments such as CMM, VMM, profilometer, indicators, height gauge, micro-meters and any other inspection gauges. Hands on handling CMM Zeiss Calypso is an...

  • Quality Engineer/ Supervisor

    2 weeks ago

    Batu Kawan, Penang, Malaysia PENANG AUTOMATION CLUSTER SDN BHD Full time 60,000 - 120,000 per year

    Job Responsibilities :To liaise with customers' Supplier Quality Engineers (SQE), Research & Development (R&D) engineers, and Manufacturing engineers to establish outgoing inspection standards and criteria for fabricated parts.To assist with New Product Introduction (NPI), First Article Inspection (FAI) support and manage pre-production trial runs and first...

  • QA Technician

    2 weeks ago

    Batu Kawan, Penang, Malaysia Greatech Integration (M) Sdn Bhd Full time 13,500 per year

    Job Descriptions:To perform daily quality inspection on parts received, ensure specification & process requirements are met. Area of coverage may include vendor incoming inspection, in-process inspection, out-going inspection & machine buy-off. Review & monitor CMM room temperature & humidity daily tracking. External & internal calibration activities...

  • QA Technician

    2 days ago

    Batu Kawan, Penang, Malaysia Greatech Integration (M) Sdn Bhd Full time 30,000 - 54,000 per year

    Job Descriptions:To perform daily quality inspection on parts received, ensure specification & process requirements are met. Area of coverage may include vendor incoming inspection, in-process inspection, out-going inspection & machine buy-off. Daily CMM room temperature & humidity tracking. External & internal calibration activities arrangement,...

  • qa technician

    2 weeks ago

    Batu Kawan, Penang, Malaysia CLASSA INDUSTRIAL (M) SDN BHD Full time 24,000 - 36,000 per year

    SCOPE OF WORKASSISTING IN PERFORMING MEASUREMENT, PREPARING MEASUREMENT REPORT & PROPER FILING OF MEASUREMENT/ ANALYSIS REPORTDUTIES AND RESPONSIBILITIESPERFORM FIRST ARTICLE INSPECTION, PREPARE FAI REPORT FOR CUSTOMER & DO PROPER FILLING OF FAI REPORTPERFORM MEASUREMENTS / TESTING AS PER MEASUREMENT/ TEST REQUISITIONPERFORM MEASUREMENT SYSTEM ANALYSISa)...

  • Welding Process Engineer

    2 weeks ago

    Batu Kawan, Penang, Malaysia UWC Industrial Sdn Bhd Full time 30,000 - 42,000 per year

    Provide welding engineering support to Engineering, Quality and Manufacturing to fabricate equipment in accordance with all applicable code and customer requirements.Conduct DFM Analyzing engineering designs for welding requirements and process capabilities.Evaluates new developments in welding field for possible application to current welding problems or...

  • qc inspector

    2 days ago

    Batu Maung, Penang, Malaysia AKT Components Full time 60,000 - 120,000 per year

    Key Responsibilities:Develop and implement quality control systems on the production floor.Conduct spot checks on QC and production areas to ensure compliance with quality standards.Perform data analysis to identify trends and issues related to product or process quality.Implement corrective and preventive actions (CAPA) for recurring quality issues on the...

  • Quality Inspector/cmm Operator

    1 week ago

    Batu Kawan, Malaysia Chis International Technical Resources Sdn Bhd Full time

    **Quality Inspector - Technician (CMM)** **RM2000-3000** **Permanent** **Batu Kawan Penang** - To perform dimensional measurement and quality inspection for in-process, finished, assembled parts and FA parts according to part drawings and specifications. - To use variety of precision measuring instruments such as CMM, VMM, profilometer, indicators, height...

  • Qc Inspector Rm2000-3000

    2 weeks ago

    Batu Kawan, Malaysia Chis International Technical Resources Sdn Bhd Full time

    **Quality Inspector - Technician (CMM)** **RM2000-3000** **Permanent** **Batu Kawan Penang** - To perform dimensional measurement and quality inspection for in-process, finished, assembled parts and FA parts according to part drawings and specifications. - To use variety of precision measuring instruments such as CMM, VMM, profilometer, indicators, height...

  • QA Technician

    1 week ago

    Batu Kawan, Malaysia Greatech Integration (M) Sdn Bhd Full time

    Job Descriptions: 1. To perform daily quality inspection on parts received, ensure specification & process requirements are met. 2. Area of coverage may include vendor incoming inspection, in-process inspection, out-going inspection & machine buy-off. 3. Daily CMM room temperature & humidity tracking. 4. External & internal calibration activities...

  • Qc Inspector

    2 days ago

    Batu Caves, Malaysia Orient Biotech Sdn Bhd Full time

    **QC Inspector** **JOB DESCRIPTION** - Assist QA/QC Executive in food quality and food safety checking during packaging progress. - Communicate with the production team to ensure all product quality and safety are in place during operation. - Monitor loading process and assist operation team to ensure people and working place in good and clean condition. -...

  • QA Inspector

    4 days ago

    Batu Kawan, Malaysia SONT Photonics Sdn. Bhd. Full time

    **Responsibilities**: - Perform incoming inspection of components and materials to ensure compliance with specifications. - Conduct in-process and final inspections of optical modules for quality and functionality. - Record and report inspection results, defects, and non-conformances accurately. - Assist in root cause analysis and implement corrective...

  • QA Technician

    1 week ago

    Batu Kawan, Malaysia Greatech Integration (M) Sdn Bhd Full time

    **Job Descriptions**: 1. To perform daily quality inspection on parts received, ensure specification & process requirements are met. 2. Area of coverage may include vendor incoming inspection, in-process inspection, out-going inspection & machine buy-off. 3. Review & monitor CMM room temperature & humidity daily tracking. 4. External & internal calibration...

  • QA Executive

    1 week ago

    Batu Kawan, Malaysia UWHM SDN BHD Full time

    Lead in Drawing Requirement Form (DRF) Transfer Documentation (Inspection Standard) - Lead in Process Flow Record (PFR) Traceability and Reject Record - Manage sample of product and Responsible in Updating Keep Sample Master List - Lead in updating QC Equipment List & QC Work Instruction (WI) - Prepare Certificate of Analysis & Certificate of Origin as per...

  • QA Executive

    1 week ago

    Batu Kawan, Malaysia UMediC Healthcare Full time

    Lead in Drawing Requirement Form (DRF) Transfer Documentation (Inspection Standard) - Lead in Process Flow Record (PFR) Traceability and Reject Record - Manage sample of product and Responsible in Updating Keep Sample Master List - Lead in updating QC Equipment List & QC Work Instruction (WI) - Prepare Certificate of Analysis & Certificate of Origin as per...

  • Technician - Demqra

    1 week ago

    Batu Kawan, Malaysia Micron Full time

    **Our vision is to transform how the world uses information to enrich life for all.** Join an inclusive team passionate about one thing: using their expertise in the relentless pursuit of innovation for customers and partners. The solutions we build help make everything from virtual reality experiences to breakthroughs in neural networks possible. We do it...

  • Demqra Technician

    7 days ago

    Batu Kawan, Malaysia Micron Full time

    **Our vision is to transform how the world uses information to enrich life for all.** Join an inclusive team passionate about one thing: using their expertise in the relentless pursuit of innovation for customers and partners. The solutions we build help make everything from virtual reality experiences to breakthroughs in neural networks possible. We do it...