Assistant Chief Mechanic

1 week ago

Putrajaya, Malaysia RESORT VILLA GOLF COURSE BERHAD Full time

Inspect, diagnose and repair mechanical defects in golf course during operation and construction equipment and report to CM
Grind, back lap, set and adjust mowers to cut at various height
Overhaul and repair automotive and other powered equipment including engines, brakes, transmissions, differentials, springs and mufflers; secure and replace tools and parts
Assist for administrative duties in relation to operation of workshop including purchasing, receiving of spare parts, departmental billing, parts inventory control, safety checklists for equipment. Vendor association in terms of bidding and purchase of needed material
Responsible to maintain sufficient of engine oil, hydraulic, grease and gear oil inventories to facilitate standard service of equipment within specification time and hour. Make sure orders are received, correct and sufficient at all time
Assist and suggest to CM in capital equipment purchases whenever need and provide list of unwanted or unrepairable equipment for write of fixed asset
Responsible for continuing education to all employees/ operator in terms of safety operation, basic check prior to use of equipment before perform in the field
Maintain shop in orderly condition, neat and clean up of working areas after repairs on daily basic
Scrutinize operators proper use of turf equipment in field with spot check, ensure operators conduct basic refill of engine oil, water cooler, battery water, fuel tank, fluid levels, wash and proper park after each use
Ability to repair and maintain all golf course equipment
Educate operators how to change repair tires, maintain mileage reports, record and reflect worn and tear of parts prior to breakdown
Program to refurbish equipment body repair and painting in yearly basic
Perform equipment modification to suit the use in turf maintenance objective if needed
Other duty and job description shall be followed as per direction of Course Superintendent and Department operational need from time to time
Completely redesigned and rebuilt, this 18 hole course is facilitated with BUGGY ON COURSE, making Palm Garden Golf Club the first premier public golf course to offer such facility. With its enchanting landscape and undulating fairways, course designer Ted Parslow have once again proven his mettle, which is akin to a master jeweller, transforming an uncut stone into a gemstone.

Open for play every day of the week, aspiring golfers must not be complacent with its apparent simplicity, but are advised to thread with caution to avoid the numerous high lipped bunkers and overcoming the challenging greens in order to return good scores. Smack in the middle of the course, one will find the unique two tier timber structured drink-hut with a commanding view of the course and surrounding wetlands.

A Mediterranean styled clubhouse compliments the golf course and golfers dine here with a panoramic view of the signature hole #18, Par 4. Adjoining the clubhouse is the recreational wing, including a gymnasium, infinity pool, sauna and tennis court. Only 20 minutes to Kuala Lumpur city centre and 25 minutes to KLIA (International Airport). An ideal stopover for travellers wishing to squeeze in a round of golf prior to departure. Marriott Hotel and Palm Garden Hotel are both within a Par 5 distance away while our mega shopping mall is due for completion in 2014. A great place to stay, unwind and play
SPM / O Level / SKM Level 1 / SKM Level 2 / SKM Level 3 or Equivalent

  • Assistant Chief Concierge

    7 days ago

    Putrajaya, Malaysia IOI CITY HOTEL SDN BHD Full time

    Assistant Chief Concierge manages the Team responsible for giving information to customers, assist guests with various tasks such as making restaurant reservations, recommending entertainment highlights, booking transportation (limousines, airplanes, boats, etc.) and other services, procurement of tickets to special events, and assisting with various travel...

  • Bo Chargeman 33kv

    1 week ago

    Putrajaya, Malaysia IOI City Mall, Putrajaya Full time

    To assist the Chief Engineer in the planning and carry out of all preventive maintenance and routine job. - Obtain "permit to wok" for all repair works (Mechanical and Electrical) whenever is required. - Establish and review shutdown work and normalizing procedures for all mechanical and electrical facilities in line with Electricity Supply Act and...

  • Mechanical Supervisor

    2 weeks ago

    Putrajaya, Malaysia VFive Group Sdn Bhd Full time 24,000 - 36,000 per year

    Job Title: Mechanical Supervisor (Building Maintenance)Location: PutrajayaEmployment Type: Contract (until completion of project)Department: Facility & MaintenanceJob Summary:The Mechanical Supervisor (Building Maintenance) is responsible for overseeing, coordinating, and supervising mechanical works and maintenance activities for building projects. This...

  • mechanical engineer

    2 weeks ago

    Putrajaya, Malaysia sinar teknik urus harta sdn bhd Full time 30,000 - 60,000 per year

    PROJECT PLACEMENT : KPDN, LOT2G3, PUTRAJAYAQUALIFICATION REQUIREMENTS:Bachelor's Degree in Mechanical Engineering.Experienced at least 3 years in the field of Mechanical Engineering.Priority experience in building facility maintenances.Good interpersonal and leadership skill.Able to work with minimum supervision and work under pressure in meeting...

  • mechanical engineer

    2 weeks ago

    Putrajaya, Malaysia SINAR JERNIH SDN BHD Full time 24,000 - 36,000 per year

    Location: Heriot Watt University, PutrajayaJob Scope :· Plan and supervise maintenance and repair activities and liaise with responsible parties regarding issues related to Mechanical Engineering.· Solving problems related to Mechanical Engineering and making reports.· Assist the Mechanical engineer & Facility Manager in handling the overall operation...

  • Mechanical Technician

    4 days ago

    Putrajaya, Malaysia Amaranthus Line Sdn Bhd Full time

    **URGENT HIRING** **MECHANICAL TECHNICIAN** - Responsible for supporting the production and maintenance of assembly and modification of machines. - Involved in machine repair, modification and improvement of machines. - Troubleshoot machine/equipment breakdowns to determine required corrective action. - Advise the production team on machine condition and...

  • Mechanical Engineer

    3 hours ago

    Putrajaya, Malaysia VFive Group Sdn Bhd Full time 48,000 - 60,000 per year

    Job Title: Mechanical Engineer (Building Maintenance)Location: PutrajayaEmployment Type: Contract (until completion of project)Department: Facility & MaintenanceJob Summary:We are seeking a highly skilled Mechanical Engineer (Building Maintenance) to ensure that the operation of Electrical activities are delivered effectively and efficiently to achieve...

  • BCS Mechanical Technician

    1 hour ago

    Putrajaya, Putrajaya Federal Territory, Malaysia Synerlitz Malaysia Sdn Bhd Full time 30,000 - 60,000 per year

    Company DescriptionSynerlitz Malaysia Sdn Bhd, established in 1998, is a leading provider of engineering and technical services with expertise in EPCC, Civil, Structural, Mechanical, Piping, and Boiler engineering works. The company also offers Facility Management Services and IT Solutions, supporting a wide range of industries. With decades of experience,...

  • Iow Mechanical

    2 days ago

    Putrajaya, Malaysia HAMAL BINA'IN SDN BHD Full time

    Full job description - Supervise M&E works on site to ensure they are carried out in accordance with drawings, specifications, and standards. - Monitor daily progress and ensure timely execution of M&E activities. - Conduct routine inspections, verify that materials and workmanship comply with approved specifications and quality requirements. - Maintain...

  • Cashier (IOI Conezion Putrajaya)

    2 days ago

    Putrajaya, Malaysia TRENDCELL SDN. BHD. (Retail) Full time 30,000 - 60,000 per year

    Key Responsibilities:Generate POS IDs for the Assistant Chief Cashier (ACC) and cashiers when authorized and verified by the Chief Cashier (CC)Assist in preparing cash floats and distributing them to all cashiers, ensuring sufficient small notes and loose change (coins) when authorized by the Chief Cashier (CC)Ensure that each cashier counter's total sales...